SEAINT

 

INTRO

 

SEARCH
ARCHIVE

 

NEED
A BOOK?

 

2010
Jan-Mar
Apr-Jun
Jul-Sep

 

2009
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2008
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2007
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2006
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2005
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2004
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2003
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2002
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2001
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

2000
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

1999
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

1998
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

1997
Jan-Jun
Jul-Sep
Oct-Dec

1996
Jan-Jun
Jul-Dec

 

1995
Jul-Dec

 

HOME

Some recommendations...
 
 

 
 

---

SEAINT Mail Archive 2007 (Apr-Jun)

Civil and Structural Engineering discussions by author

www.seaintarchive.org

• About this archive / Index
• Messages sorted by: [Thread] [Subject] [Date]

Site Search: Need a book? Civil and Structural Engineering book recommendations...
 

---

Messages: 1097

• 고동우
  • Check point for design the reaction wall for laboratory!!! Mon, 7 May 2007 21:10:07 -0600

• José Inácio Ávila
  • Re: Articles on soil vibrations from rollers Tue, 22 May 2007 18:53:42 -0600

• 남윤호
  • Steel Member Check for Seismic Loading Thu, 3 May 2007 07:16:24 -0600

• A. Guida
  • RE: SHOOTINGS Tue, 17 Apr 2007 09:34:22 -0600

• Abolhassan Astaneh
  • Base Plate Steel TIPS Report Wed, 11 Apr 2007 07:34:26 -0600
  • Braced Frame Connection, Slip-Critical or Bearing Bolts? Mon, 4 Jun 2007 00:43:01 -0600

• Abolhassan Astaneh-Asl
  • Base Plate Steel TIPS Report -Needs your input with appreciation Mon, 9 Apr 2007 19:59:41 -0600
  • SCBF Compressible Material? Fri, 11 May 2007 11:07:20 -0600
  • MacArthur MAze Collapse --Text, audio and video stream of Jim Lehrer News Hour Segment now on the Internet. Sat, 12 May 2007 11:30:38 -0600
  • New Steel TIPS from SSEC: Progressive Collapse Prevention of Steel Frames with Shear Connections Tue, 15 May 2007 10:31:41 -0600
  • Mac Arthur Maze Collapse and Reconstruction-www.capradio.com Wed, 30 May 2007 13:48:17 -0600
  • Large Bay 'X' Bracing Thu, 31 May 2007 06:44:44 -0600
  • Re: Large Bay 'X' Bracing Fri, 1 Jun 2007 01:32:50 -0600
  • Re: FEMA Bolted Connection Tue, 5 Jun 2007 11:28:22 -0600

• Adam Vakiener
  • RE: EnerCalc - Retaining Wall Design Thu, 21 Jun 2007 08:16:55 -0600

• Adjebli
  • Partnership Wed, 4 Apr 2007 11:39:54 -0600
  • Re: Spread sheet for Torion in RC beams Mon, 9 Apr 2007 17:19:19 -0600
  • Re: Santa Barbara/Montecito Fri, 18 May 2007 15:29:45 -0600

• Alden Manipula
  • OT: HP-750C Fri, 25 May 2007 10:28:10 -0600
  • RE: OT: HP-750C Wed, 30 May 2007 07:11:45 -0600

• Aldo Gonzales
  • Masonry Skewed Shear Walls Fri, 20 Apr 2007 00:04:32 -0600

• Alexander \(Sasha\) Itsekson
  • Re: Aluminum Lag Bolts Mon, 25 Jun 2007 00:41:31 -0600
  • RE: Aluminum Lag Bolts Mon, 25 Jun 2007 11:37:20 -0600

• Allen.Adams
  • RE: steel - vibration analysis Mon, 11 Jun 2007 08:47:44 -0600

• AmerRescue
  • Re: NEWSHOUR report on the MacArthur Maze freeway collapse Thu, 10 May 2007 21:37:15 -0600
  • Re: NEWSHOUR report on the MacArthur Maze freeway collapse Fri, 11 May 2007 14:46:27 -0600

• Anantha Narayan C.K.
  • Weak axis moment frame K Value Fri, 6 Apr 2007 11:25:07 -0600
  • Re: Weak axis moment frame K Value Fri, 6 Apr 2007 15:42:16 -0600
  • Site Specific Analysis Sds and Sd1 values Thu, 12 Apr 2007 12:05:10 -0600
  • Re: Site Specific Analysis Sds and Sd1 values Thu, 12 Apr 2007 17:18:09 -0600
  • VT Shooting Mon, 16 Apr 2007 13:57:49 -0600
  • Re: NEWS ITEM: (And what're the seismic parameters for Mumbai?) Sat, 2 Jun 2007 06:29:01 -0600
  • Cracking Moment Mcr Mon, 11 Jun 2007 08:48:32 -0600
  • Cracking Moment Thu, 14 Jun 2007 13:49:23 -0600
  • Re: Cracking Moment Thu, 14 Jun 2007 15:05:30 -0600
  • Question regarding Cracking Moment Thu, 14 Jun 2007 15:18:59 -0600
  • Re: ASCE 7-05 Errors Sun, 17 Jun 2007 09:14:29 -0600

• Andrew Eklund
  • RE: SHOOTINGS Wed, 25 Apr 2007 10:11:37 -0600

• Andrew Kester, PE
  • single steel PL connections Tue, 3 Apr 2007 12:18:51 -0600
  • re: new PE forming partnership Thu, 5 Apr 2007 07:22:20 -0600
  • alternative reinforcement... Tue, 1 May 2007 08:47:46 -0600

• Andy Richardson
  • welding spec for appearance Thu, 3 May 2007 06:16:04 -0600
  • Special Inspections and Insurance Thu, 17 May 2007 05:45:47 -0600

• Anthony Rubalcava
  • Re: California SB 1175 & AB 127 Tue, 10 Apr 2007 15:01:37 -0600

• arshad vali
  • Re: Train Loading & Box Culvert Program Fri, 13 Apr 2007 08:43:51 -0600
  • Re: What do call your EITs? Tue, 15 May 2007 08:45:10 -0600
  • Re: Sulphur Pit Roof Emergency Thu, 24 May 2007 11:43:31 -0600

• Arvind Salecha
  • Curved Prestressed Concrete Box Girders Fri, 25 May 2007 09:07:51 -0600

• ASC
  • SHOOTINGS Tue, 17 Apr 2007 02:45:32 -0600
  • VIRGINIA TECH Thu, 19 Apr 2007 03:33:25 -0600
  • GUN CONTROL Wed, 25 Apr 2007 15:22:52 -0600
  • new way of using chain Sat, 28 Apr 2007 02:27:28 -0600
  • CHAIN IN CONCRETE Tue, 1 May 2007 01:42:04 -0600
  • TORSIONAL BUCKLING Tue, 5 Jun 2007 02:44:20 -0600
  • ARCHIT FEES Thu, 28 Jun 2007 01:30:50 -0600

• Ashwin Ranga Swamy
  • Re:Steel Member CB150 Thu, 19 Apr 2007 11:13:40 -0600

• ASLCSE
  • Spread sheet for Torion in RC beams Mon, 9 Apr 2007 17:00:09 -0600
  • Re: Spread sheet for Torion in RC beams Tue, 10 Apr 2007 11:27:03 -0600
  • Re: Spread sheet for Torion in RC beams Wed, 11 Apr 2007 15:48:28 -0600
  • Cantilevered Retaining Walls on Pile Foundation Sun, 15 Apr 2007 15:26:56 -0600
  • Re: Cantilevered Retaining Walls on Pile Foundation Mon, 16 Apr 2007 12:52:10 -0600
  • Re: SHOOTINGS Tue, 24 Apr 2007 14:20:53 -0600
  • Re: SHOOTINGS Tue, 24 Apr 2007 14:28:58 -0600
  • Re: helical earth anchors Fri, 27 Apr 2007 09:50:07 -0600

• Avik Ghosh
  • RE: curved wood sw Mon, 9 Apr 2007 17:53:48 -0600

• AWC Info
  • RE: ASCE 7-05 Errors Wed, 27 Jun 2007 06:48:09 -0600

• Barry Welliver
  • RE: ASCE 7-05 Errors Thu, 7 Jun 2007 08:00:15 -0600
  • RE: REVIT Thu, 28 Jun 2007 10:37:35 -0600
  • RE: REVIT or (ArchiCad) Thu, 28 Jun 2007 11:24:54 -0600
  • RE: REVIT Thu, 28 Jun 2007 13:07:34 -0600

• bart
  • Re: helical earth anchors Thu, 26 Apr 2007 17:04:41 -0600
  • Re: why the moment frame must be capable to resist at least 25% of lateral loads? Sun, 6 May 2007 09:46:05 -0600
  • RE: Backing bar in RBS steel moment connection Fri, 18 May 2007 12:50:10 -0600
  • RE: Backing bar in RBS steel moment connection Fri, 18 May 2007 15:42:13 -0600
  • Re: Concrete PH question Fri, 25 May 2007 11:25:04 -0600
  • Re: High lift grouting Fri, 25 May 2007 13:57:09 -0600
  • RE: electronic signature Fri, 22 Jun 2007 11:42:55 -0600
  • RE: REVIT or (ArchiCad) Thu, 28 Jun 2007 12:48:05 -0600

• bcainse
  • Re: Lumber Species in Phoenix Tue, 3 Apr 2007 10:13:16 -0600
  • Re: Garage sizes Thu, 12 Apr 2007 11:19:48 -0600
  • Re: California Bearing Ratio Fri, 13 Apr 2007 11:15:43 -0600
  • Re: VIRGINIA TECH Thu, 19 Apr 2007 16:16:35 -0600
  • Re: SHOOTINGS Tue, 24 Apr 2007 17:22:12 -0600
  • Re: Using steel chains as concrete reinforcement?? Fri, 27 Apr 2007 13:38:28 -0600
  • Re: beam camber... Tue, 1 May 2007 10:16:29 -0600
  • Re: alternative reinforcement... Tue, 1 May 2007 10:23:17 -0600
  • Re: "Certifying" Lifting Plates Tue, 1 May 2007 17:58:28 -0600
  • Re: Rationale for Sprinklers on Trucks... Thu, 3 May 2007 13:44:50 -0600
  • Re: Any VA engineers out there... Fri, 18 May 2007 12:13:48 -0600
  • Re: SAP SHELL DESIGN Mon, 21 May 2007 11:30:38 -0600

• Ben Yousefi
  • Career opportunity with the City of Santa Monica Building & Safety Mon, 9 Apr 2007 09:47:27 -0600
  • RE: Site Specific Analysis Sds and Sd1 values Thu, 12 Apr 2007 16:56:43 -0600
  • RE: Site Specific Analysis Sds and Sd1 values Thu, 12 Apr 2007 17:22:58 -0600
  • RE: why the moment frame must be capable to resist at least 25% of lateral loadsØŸ Thu, 3 May 2007 11:11:36 -0600
  • RE: Rationale for Sprinklers on Trucks... Thu, 3 May 2007 12:02:17 -0600
  • RE: California Amendments to the 2006 IBC Thu, 10 May 2007 12:24:07 -0600
  • RE: Diagonal base shear UBC 97 Wed, 30 May 2007 08:15:15 -0600
  • RE: Code Costs, Redux Tue, 5 Jun 2007 12:00:04 -0600
  • RE: ASCE 7-05 Errors Tue, 26 Jun 2007 13:21:17 -0600

• Benjamin Maxwell
  • Re: bay bridge Tue, 1 May 2007 23:52:34 -0600
  • RE: Rationale for Sprinklers on Trucks... Thu, 3 May 2007 11:37:05 -0600
  • Re: Concrete Overlay Tue, 8 May 2007 23:42:26 -0600

• Bernard, Scott C.
  • RE: SHOOTINGS Tue, 17 Apr 2007 04:52:10 -0600
  • RE: What do call your EITs? Mon, 14 May 2007 16:04:43 -0600

• bill
  • RE: What do call your EITs? Mon, 14 May 2007 09:33:24 -0600

• Bill Allen
  • RE: Lumber Species in Phoenix Tue, 3 Apr 2007 09:17:51 -0600
  • RE: Lumber Species in Phoenix Tue, 3 Apr 2007 09:20:19 -0600
  • RE: Cost of codes (was RE: ASCE 7-05 Wind Load and Publication Costs) Fri, 11 May 2007 06:56:53 -0600
  • Alternate Cold Joint Location Tue, 22 May 2007 15:38:13 -0600
  • RE: Alternate Cold Joint Location Tue, 22 May 2007 17:32:44 -0600
  • Revised Spring 2007 Masonry Chronicles has been published Thu, 24 May 2007 11:34:48 -0600
  • RE: Sole plate nailing Thu, 14 Jun 2007 10:37:08 -0600
  • RE: turn of the nut Thu, 14 Jun 2007 10:39:42 -0600
  • RE: Sole plate nailing Thu, 14 Jun 2007 12:06:08 -0600
  • RE: Dumb Question Fri, 15 Jun 2007 17:01:36 -0600
  • Stability of block structure? Fri, 15 Jun 2007 18:23:59 -0600
  • RE: ASCE 7-05 Errors Sun, 17 Jun 2007 10:52:25 -0600
  • RE: ASCE 7-05 Errors Tue, 26 Jun 2007 09:34:05 -0600
  • RE: ASCE 7-05 Errors Wed, 27 Jun 2007 11:24:56 -0600
  • RE: REVIT Thu, 28 Jun 2007 10:49:00 -0600
  • RE: REVIT Thu, 28 Jun 2007 14:02:48 -0600

• Bill Cain
  • Re: Articles on soil vibrations from rollers Tue, 22 May 2007 22:49:17 -0600
  • Re: Alternate Cold Joint Location Tue, 22 May 2007 22:54:18 -0600
  • Re: High lift grouting Fri, 25 May 2007 13:37:51 -0600
  • Re: some forum? re lateral bracing?? I DO NOT BELONG HERE!!!!!!!!!!!!!! Wed, 30 May 2007 14:00:58 -0600
  • Re: Sole plate nailing Thu, 14 Jun 2007 16:39:19 -0600
  • Re: LL on roof with solar panels. Fri, 15 Jun 2007 10:30:15 -0600
  • Re: Dumb Question Fri, 15 Jun 2007 13:12:13 -0600
  • Fwd: ASCE 7-05 Errors Mon, 18 Jun 2007 23:06:23 -0600
  • Re: electronic signature Fri, 22 Jun 2007 10:42:48 -0600
  • Re: 2001 CBC Chapter A Fri, 22 Jun 2007 11:03:38 -0600
  • Re: REVIT Thu, 28 Jun 2007 16:07:25 -0600

• Bill Polhemus
  • FOUNDATIONS: Warranty for Drilled Pier/Shaft Foundation Installation Thu, 24 May 2007 10:15:12 -0600
  • Re: Sulphur Pit Roof Emergency Thu, 24 May 2007 10:21:34 -0600
  • Re: Sheffield Joists Thu, 24 May 2007 12:53:54 -0600
  • Re: Night Shift duty for my computer Fri, 1 Jun 2007 16:47:00 -0600
  • NEWS ITEM: (And what're the seismic parameters for Mumbai?) Fri, 1 Jun 2007 16:48:09 -0600

• Bill S. Marczewski
  • Washington State - SEIII Exam Mon, 4 Jun 2007 08:35:43 -0600
  • Re: Code Costs, Redux Mon, 4 Jun 2007 09:06:54 -0600

• Blake Patsy
  • Re: Code Costs, Redux Sun, 3 Jun 2007 21:31:58 -0600

• Bradford_Burton
  • Bradford Burton is out of the office. Wed, 11 Apr 2007 16:03:40 -0600

• Brian K. Smith
  • Re: Using steel chains as concrete reinforcement?? Fri, 27 Apr 2007 08:40:59 -0600
  • Re: Looking for engineer in Louisiana Tue, 29 May 2007 08:18:41 -0600

• Brian S Bossley
  • Steel Properties for SAE 1045 at Higher Temperatures Fri, 15 Jun 2007 05:05:43 -0600
  • RE: REVIT Fri, 29 Jun 2007 07:13:10 -0600

• Casey K. Hemmatyar
  • RE: Using steel chains as concrete reinforcement?? Fri, 27 Apr 2007 12:32:27 -0600
  • RE: beam camber... Mon, 30 Apr 2007 17:43:01 -0600
  • SEAINT blog Wed, 13 Jun 2007 10:20:48 -0600
  • RE: 2006 IBC Seismic Map CD Thu, 28 Jun 2007 12:49:37 -0600
  • RE: 2006 IBC Seismic Map CD (USGS Web site) Thu, 28 Jun 2007 13:07:10 -0600

• Chance, Acie
  • RE: SHOOTINGS Tue, 24 Apr 2007 15:45:46 -0600

• Charles R. Ashley Jr.
  • RE: Geotech Reports Tue, 3 Apr 2007 21:29:56 -0600
  • ICC / ICBO Reports Fri, 22 Jun 2007 10:09:24 -0600

• Christopher Banbury
  • geotechnical software Wed, 11 Apr 2007 19:17:27 -0600
  • bearing capacity equation Thu, 12 Apr 2007 08:40:44 -0600
  • RE: bearing capacity equation Thu, 12 Apr 2007 09:30:30 -0600
  • RE: Converting PLT files or AutoCad output to TIFF format Sat, 14 Apr 2007 18:20:17 -0600
  • RE: SHOOTINGS Tue, 17 Apr 2007 10:21:46 -0600
  • RE: VIRGINIA TECH Thu, 19 Apr 2007 08:21:39 -0600
  • RE: Manufactured housing foundations Thu, 26 Apr 2007 14:20:58 -0600
  • helical earth anchors Thu, 26 Apr 2007 14:39:25 -0600
  • RE: metal lattice Fri, 11 May 2007 13:09:42 -0600
  • RE: metal lattice Fri, 11 May 2007 13:33:28 -0600
  • 2001 CBC Chapter A Fri, 22 Jun 2007 08:44:01 -0600
  • RE: 2001 CBC Chapter A Fri, 22 Jun 2007 09:38:16 -0600
  • RE: Aluminum Lag Bolts Fri, 22 Jun 2007 17:24:27 -0600
  • RE: REVIT Thu, 28 Jun 2007 17:32:54 -0600

• Christopher Wright
  • Re: SHOOTINGS Tue, 17 Apr 2007 11:15:10 -0600
  • Re: Copying sealed PE work for personal records Wed, 18 Apr 2007 20:53:07 -0600
  • Re: welding spec for appearance Thu, 3 May 2007 09:54:17 -0600
  • Re: Steel Member Check for Seismic Loading Thu, 3 May 2007 10:14:46 -0600
  • Re: Steel Member Check for Seismic Loading Thu, 3 May 2007 10:21:56 -0600
  • Re: metal lattice Fri, 11 May 2007 12:51:10 -0600
  • Re: What do call your EITs? Mon, 14 May 2007 09:26:25 -0600
  • Re: Steel factory Sat, 19 May 2007 12:06:49 -0600
  • Re: SAP SHELL DESIGN Sat, 19 May 2007 12:08:42 -0600
  • Re: Steel factory Sun, 20 May 2007 10:47:39 -0600
  • Re: SAP SHELL DESIGN Sun, 20 May 2007 13:50:41 -0600
  • Re: SAP SHELL DESIGN / Steel factory Tue, 22 May 2007 20:48:31 -0600
  • Re: SAP SHELL DESIGN / Steel factory Wed, 23 May 2007 07:08:15 -0600
  • Re: 9-11 Wackos Fri, 25 May 2007 13:10:44 -0600
  • Re: 9-11 Wackos Fri, 25 May 2007 20:10:31 -0600
  • Re: strengthening of floor joists with FRP's?? Sat, 2 Jun 2007 01:01:24 -0600
  • Re: Code Costs, Redux Sun, 3 Jun 2007 23:03:14 -0600
  • Re: Standard format of submission of structural design calculations. Sun, 3 Jun 2007 23:33:11 -0600
  • Re: Torquing of bolts by the bolt head Thu, 7 Jun 2007 18:49:54 -0600
  • Re: turn of the nut Thu, 14 Jun 2007 12:05:35 -0600
  • Re: Steel Properties for SAE 1045 at Higher Temperatures Fri, 15 Jun 2007 10:09:43 -0600
  • Re: Dumb Question Fri, 15 Jun 2007 15:02:48 -0600
  • Re: Dumb Question Fri, 15 Jun 2007 19:42:54 -0600

• chuck utzman
  • metal lattice Fri, 11 May 2007 12:42:47 -0600
  • Re: metal lattice Sat, 12 May 2007 11:35:33 -0600
  • Re: Fw: roof truss daiphragm forces Fri, 18 May 2007 09:48:05 -0600

• Conrad Harrison
  • RE: Searching for books and specially solved problems Mon, 2 Apr 2007 01:41:06 -0600
  • RE: Copying sealed PE work for personal records Tue, 17 Apr 2007 20:00:00 -0600
  • RE: ASCE 7-05 Wind Load and Publication Costs Fri, 11 May 2007 00:18:26 -0600
  • RE: SAP SHELL DESIGN / Steel factory Mon, 21 May 2007 22:06:47 -0600
  • RE: SAP SHELL DESIGN / Steel factory Thu, 24 May 2007 01:33:28 -0600
  • RE: Standard format of submission of structural design calculations. Mon, 4 Jun 2007 01:37:25 -0600
  • RE: Opinions on "Multiframe" Mon, 18 Jun 2007 22:33:20 -0600

• Craig Hawe
  • Old Canadian Member Properties Tue, 3 Apr 2007 11:02:49 -0600
  • Re: Using steel chains as concrete reinforcement Mon, 30 Apr 2007 08:01:21 -0600

• Cummings, Thomas J.
  • RE: Old Beam Wed, 20 Jun 2007 17:06:13 -0600

• Daniel Popp
  • Parking Garage Occupancy Category Fri, 18 May 2007 12:55:06 -0600
  • Re: ASCE 7-05 Errors Wed, 20 Jun 2007 11:19:35 -0600

• Daryl Richardson
  • Re: Lumber Species in Phoenix Mon, 2 Apr 2007 15:19:42 -0600
  • Re: Old Canadian Member Properties Tue, 3 Apr 2007 12:55:09 -0600
  • Re: Lumber Species in Phoenix Tue, 3 Apr 2007 15:04:06 -0600
  • Re: Partnership Wed, 4 Apr 2007 22:01:30 -0600
  • Re: Weak axis moment frame K Value Fri, 6 Apr 2007 13:22:51 -0600
  • Re: Stone house Fri, 6 Apr 2007 13:46:11 -0600
  • Re: COPIES OF PLANS Sat, 7 Apr 2007 11:06:12 -0600
  • Re: conduits in footings - thoughts? Tue, 10 Apr 2007 13:59:12 -0600
  • Re: SHOOTINGS Tue, 17 Apr 2007 19:37:32 -0600
  • SHOOTINGS AT VPI Tue, 17 Apr 2007 19:46:30 -0600
  • Re: Gantry Crane Rail Blockout Thu, 19 Apr 2007 11:19:58 -0600
  • Re: Gantry Crane Rail Blockout Fri, 20 Apr 2007 00:54:05 -0600
  • Re: Steel Member Check for Seismic Loading Thu, 3 May 2007 08:59:13 -0600
  • Re: SCBF Compressible Material? Thu, 10 May 2007 12:11:54 -0600
  • Re: What do call your EITs? Mon, 14 May 2007 10:49:41 -0600
  • Re: Placing concrete walls on footings before 7 days Thu, 17 May 2007 09:28:54 -0600
  • Sulphur Pit Roof Emergency Wed, 23 May 2007 19:59:36 -0600
  • Re: Sulphur Pit Roof Emergency Fri, 25 May 2007 09:00:35 -0600
  • Re: Curved Prestressed Concrete Box Girders Fri, 25 May 2007 20:02:42 -0600
  • Sulphur Pit Roof Emergency Tue, 29 May 2007 15:35:32 -0600
  • Re: Large Bay 'X' Bracing Tue, 29 May 2007 22:59:52 -0600
  • Re: strengthening of floor joists with FRP's?? Sat, 2 Jun 2007 10:31:31 -0600
  • Re: strengthening of floor joists with FRP's?? Sat, 2 Jun 2007 10:35:34 -0600
  • Re: Glass railing Wed, 6 Jun 2007 23:09:49 -0600
  • Re: super flat floors Fri, 8 Jun 2007 10:18:46 -0600
  • Re: Sole plate nailing Thu, 14 Jun 2007 11:33:29 -0600
  • Re: LL on roof with solar panels. Fri, 15 Jun 2007 12:33:08 -0600

• Dave Handy
  • Re: Aluminium and stainless steel. Mon, 23 Apr 2007 13:45:26 -0600
  • super flat floors Fri, 8 Jun 2007 09:15:13 -0600

• David Fisher
  • RE: Garage sizes Thu, 12 Apr 2007 10:32:54 -0600
  • RE: Copying sealed PE work for personal records Wed, 18 Apr 2007 10:05:39 -0600
  • RE: VIRGINIA TECH Thu, 19 Apr 2007 13:27:06 -0600
  • beam camber... Mon, 30 Apr 2007 16:41:52 -0600
  • RE: bay bridge Wed, 2 May 2007 10:01:40 -0600
  • RE: NEWSHOUR report on the MacArthur Maze freeway collapse Fri, 11 May 2007 14:52:09 -0600
  • RE: What do call your EITs? Mon, 14 May 2007 08:11:34 -0600
  • RE: What do call your EITs? Mon, 14 May 2007 11:47:31 -0600
  • RE: Castellated Beam Tables Tue, 15 May 2007 15:29:48 -0600
  • RE: Any VA engineers out there... Fri, 18 May 2007 11:37:08 -0600
  • RE: Any VA engineers out there... Fri, 18 May 2007 11:54:40 -0600
  • RE: Any VA engineers out there... Fri, 18 May 2007 12:00:07 -0600
  • Santa Barbara/Montecito Fri, 18 May 2007 12:42:56 -0600
  • RE: Wood header out of plane load Wed, 23 May 2007 15:17:27 -0600
  • RE: Aluminum Lag Bolts Mon, 25 Jun 2007 11:47:50 -0600

• David L. Fisher
  • RE: COPIES OF PLANS Sat, 7 Apr 2007 10:03:44 -0600

• David Merrick
  • Re: Masonry Skewed Shear Walls Sat, 21 Apr 2007 08:55:34 -0600
  • ASCE 7-05 Wind Load - Simplified Methods Wed, 9 May 2007 12:14:25 -0600
  • costs of code, revisions, clarifications, seminars, programs and insurance Fri, 11 May 2007 15:47:22 -0600
  • Code errata Fri, 8 Jun 2007 11:38:27 -0600
  • Re: Structural Can of Worms Wed, 13 Jun 2007 12:50:02 -0600
  • RE: ASCE 7-05 Errors Wed, 27 Jun 2007 11:14:31 -0600

• David Topete
  • RE: Lumber Species in Phoenix Mon, 2 Apr 2007 12:54:55 -0600
  • curved wood sw Mon, 9 Apr 2007 16:18:29 -0600
  • RE: curved wood sw Tue, 10 Apr 2007 11:29:49 -0600
  • RE: Spread sheet for Torion in RC beams Tue, 10 Apr 2007 11:32:46 -0600
  • RE: conduits in footings - thoughts? Tue, 10 Apr 2007 13:05:50 -0600
  • RE: conduits in footings - thoughts? Tue, 10 Apr 2007 14:09:09 -0600
  • RE: conduits in footings - thoughts? Tue, 10 Apr 2007 14:25:27 -0600
  • RE: SHOOTINGS Tue, 24 Apr 2007 16:02:48 -0600
  • RE: bay bridge Wed, 2 May 2007 09:04:51 -0600
  • RE: California Amendments to the 2006 IBC Thu, 10 May 2007 12:33:53 -0600
  • RE: Hollowcore Slab Diaphragm Connection Detailing Mon, 14 May 2007 17:23:04 -0600
  • RE: Structural Question about beam secured to top of proprietary shear wall panel. Wed, 16 May 2007 09:24:39 -0600
  • RE: Retaining wall extremes Fri, 18 May 2007 09:34:54 -0600
  • RE: Any VA engineers out there... Fri, 18 May 2007 11:20:56 -0600
  • RE: Any VA engineers out there... Fri, 18 May 2007 11:53:48 -0600
  • RE: Wood header out of plane load Wed, 23 May 2007 15:30:40 -0600
  • RE: Large Bay 'X' Bracing Thu, 31 May 2007 09:45:00 -0600
  • steel - vibration analysis Thu, 31 May 2007 17:44:51 -0600
  • RE: strengthening of floor joists with FRP's?? Mon, 4 Jun 2007 09:42:29 -0600
  • RE: Concrete Masonry Walls Tue, 5 Jun 2007 17:17:26 -0600
  • RE: steel - vibration analysis Thu, 7 Jun 2007 11:03:37 -0600
  • RE: Rooftop Seismic Anchorage Tue, 12 Jun 2007 16:45:45 -0600
  • RE: Rooftop Seismic Anchorage Wed, 13 Jun 2007 09:31:35 -0600
  • RE: Can an engineer practice with a felony conviction in California? Sat, 16 Jun 2007 16:43:25 -0600
  • RE: Old Beam Wed, 20 Jun 2007 17:04:50 -0600
  • RE: 2001 CBC Chapter A Fri, 22 Jun 2007 09:12:51 -0600
  • RE: 2001 CBC Chapter A Fri, 22 Jun 2007 09:45:54 -0600

• David Watt
  • Stair landing pans and rebar cover Tue, 5 Jun 2007 11:54:10 -0600
  • RE: File with xmcd extension Tue, 5 Jun 2007 12:21:11 -0600
  • RE: File with xmcd extension Tue, 5 Jun 2007 12:24:33 -0600

• davidfinley
  • Beveled Washers for MC Channels Tue, 15 May 2007 08:14:33 -0600

• DBruckman
  • RE: Retaining wall extremes Sat, 19 May 2007 14:00:47 -0600
  • RE: SAP SHELL DESIGN / Steel factory Wed, 23 May 2007 07:07:28 -0600
  • Code Costs, Redux Sun, 3 Jun 2007 15:31:17 -0600

• Deardorff, Mark
  • RE: some forum? re lateral bracing?? I DO NOT BELONG HERE!!!!!!!!!!!!!! Wed, 30 May 2007 09:48:52 -0600
  • RE: 2006 IBC Seismic Map CD Thu, 28 Jun 2007 12:16:38 -0600

• Dennis Wish
  • Converting PLT files or AutoCad output to TIFF format Sat, 14 Apr 2007 13:07:59 -0600
  • Frank Woeste, SE PhD - on Virgina Tech Campus where student opens fire this morning. Mon, 16 Apr 2007 13:57:51 -0600
  • RE: Virginia Tech Thu, 19 Apr 2007 06:40:22 -0600
  • Gunman from Jacobs Engineering in Bldg. 44 of Johnson Space Center (NASA) in Houston. Fri, 20 Apr 2007 14:43:43 -0600
  • RE: SHOOTINGS Tue, 24 Apr 2007 00:39:19 -0600
  • RE: SHOOTINGS Wed, 25 Apr 2007 12:28:02 -0600
  • RE: SHOOTINGS Wed, 25 Apr 2007 13:03:07 -0600
  • RE: Let the floodgates open (was: SHOOTINGS) Fri, 27 Apr 2007 14:33:40 -0600
  • ASCE 7-05 Wind Load - Simplified Methods by S.K. Ghosh in GoStructural.com Tue, 8 May 2007 20:30:50 -0600
  • RE: California Amendments to the 2006 IBC Thu, 10 May 2007 22:49:06 -0600
  • RE: ASCE 7-05 Wind Load and Publication Costs Thu, 10 May 2007 22:50:09 -0600
  • Structural Question about beam secured to top of proprietary shear wall panel. Mon, 14 May 2007 17:00:40 -0600
  • RE: Structural Question about beam secured to top of proprietary shear wall panel. Tue, 15 May 2007 19:18:35 -0600
  • RE: Subject: Re: roof truss daiphragm forces Thu, 17 May 2007 23:55:15 -0600
  • Seminars Fri, 18 May 2007 14:53:03 -0600
  • RE: Fw: roof truss daiphragm forces Sat, 19 May 2007 17:33:26 -0600
  • Structural Can of Worms Tue, 12 Jun 2007 10:30:39 -0600
  • Can an engineer practice with a felony conviction in California? Sat, 16 Jun 2007 16:33:56 -0600
  • IM Peer Assistance for Light_Framing and IBC 2006 Upcoming Code Questions. Sun, 17 Jun 2007 10:01:43 -0600
  • Architectural Fees for Residential projects Wed, 27 Jun 2007 12:22:40 -0600
  • RE: ARCHIT FEES Sat, 30 Jun 2007 22:34:32 -0600
  • RE: ARCHIT FEES Sat, 30 Jun 2007 23:03:00 -0600
  • RE: REVIT Sat, 30 Jun 2007 23:43:57 -0600

• Derek Westphal
  • Re: single steel PL connections Wed, 4 Apr 2007 00:07:25 -0600
  • Re: why the moment frame must be capable to resist at least 25% of lateral loadsŲ Thu, 3 May 2007 09:18:06 -0600
  • RE: Backing bar in RBS steel moment connection Mon, 7 May 2007 16:06:49 -0600

• DOLLY TRIVIZ
  • strengthening of floor joists with FRP's?? Sat, 2 Jun 2007 00:46:17 -0600

• DomDean
  • Re: Placing concrete walls on footings before 7 days Thu, 17 May 2007 08:09:38 -0600

• Donald Bruckman
  • RE: new PE forming partnership Thu, 5 Apr 2007 10:06:30 -0600
  • RE: COPIES OF PLANS Sat, 7 Apr 2007 11:57:40 -0600
  • RE: curved wood sw Tue, 10 Apr 2007 10:07:37 -0600
  • RE: conduits in footings - thoughts? Tue, 10 Apr 2007 13:16:43 -0600
  • RE: Garage sizes Thu, 12 Apr 2007 15:11:42 -0600
  • RE: Garage sizes Sun, 15 Apr 2007 15:40:08 -0600
  • RE: Copying sealed PE work for personal records Wed, 18 Apr 2007 08:56:51 -0600
  • RE: Converting PLT files or AutoCad output to TIFF format Thu, 19 Apr 2007 09:40:17 -0600
  • RE: SHOOTINGS Tue, 24 Apr 2007 18:20:44 -0600
  • RE: Rationale for Sprinklers on Steel Bridges Thu, 3 May 2007 10:18:56 -0600
  • RE: ASCE 7-05 Wind Load and Publication Costs Wed, 9 May 2007 10:48:45 -0600
  • RE: California Amendments to the 2006 IBC Thu, 10 May 2007 15:03:13 -0600
  • RE: Off Topic :Vish seeks advice/suggestions Fri, 11 May 2007 08:50:14 -0600
  • RE: metal lattice Fri, 11 May 2007 13:21:16 -0600
  • RE: Special Inspections and Insurance Thu, 17 May 2007 09:57:56 -0600
  • RE: Fw: roof truss daiphragm forces Mon, 21 May 2007 09:03:53 -0600
  • RE: Plywood over light gage shear wall Thu, 24 May 2007 13:34:28 -0600
  • RE: ASCE 7-05 Errors Thu, 7 Jun 2007 11:53:14 -0600
  • RE: Sole plate nailing Thu, 14 Jun 2007 10:02:00 -0600
  • RE: Sole plate nailing Thu, 14 Jun 2007 11:15:19 -0600
  • RE: dead end slab control joint Tue, 19 Jun 2007 09:46:05 -0600
  • RE: Architectural Fees for Residential projects Wed, 27 Jun 2007 12:40:56 -0600
  • RE: Architectural Fees for Residential projects Wed, 27 Jun 2007 15:01:10 -0600
  • RE: ARCHIT FEES Thu, 28 Jun 2007 08:54:45 -0600
  • REVIT Thu, 28 Jun 2007 10:06:38 -0600
  • RE: ARCHIT FEES Thu, 28 Jun 2007 10:10:20 -0600
  • RE: REVIT Thu, 28 Jun 2007 13:56:20 -0600
  • RE: REVIT Thu, 28 Jun 2007 18:00:28 -0600

• Doug Mayer
  • RE: Tilt-Up Wall Pier Design Tue, 15 May 2007 13:20:19 -0600
  • RE: Special Inspections and Insurance Thu, 17 May 2007 11:03:55 -0600
  • High lift grouting Fri, 25 May 2007 11:28:25 -0600
  • RE: High lift grouting Fri, 25 May 2007 11:57:08 -0600

• Drew Morris
  • Uplift loads on canopies Wed, 25 Apr 2007 16:07:40 -0600
  • Re: Chinese Building Code Thu, 10 May 2007 14:38:58 -0600
  • Re: Santa Barbara/Montecito Fri, 18 May 2007 15:39:40 -0600
  • Roof panel safety factors Wed, 30 May 2007 17:19:39 -0600
  • Re: strengthening of floor joists with FRP's?? Mon, 4 Jun 2007 12:50:56 -0600
  • 42 was Re: Cracking Moment Thu, 14 Jun 2007 17:51:00 -0600
  • light gage zee shapes Wed, 20 Jun 2007 17:43:19 -0600

• ECVAl3
  • Re: Alternate Cold Joint Location Tue, 22 May 2007 18:49:20 -0600
  • Re: 9-11 Wackos Fri, 25 May 2007 11:07:42 -0600
  • Re: 9-11 Wackos Fri, 25 May 2007 11:54:28 -0600
  • Re: 9-11 Wackos Fri, 25 May 2007 17:58:48 -0600
  • Sole plate nailing Thu, 14 Jun 2007 09:18:28 -0600
  • Re: Sole plate nailing Thu, 14 Jun 2007 10:26:54 -0600
  • Re: Old Beam Wed, 20 Jun 2007 18:15:35 -0600
  • Re: light gage zee shapes Wed, 20 Jun 2007 18:24:42 -0600
  • Re: ARCHIT FEES Thu, 28 Jun 2007 10:01:28 -0600

• Effland, Greg
  • RE: Large Bay 'X' Bracing Wed, 30 May 2007 09:12:12 -0600
  • RE: Large Bay 'X' Bracing Thu, 31 May 2007 09:25:58 -0600

• Ehrlich, Gary
  • RE: ASCE 7-05 Wind Load - Simplified Methods by S.K. Ghosh in GoStructural.com Wed, 9 May 2007 07:57:00 -0600
  • RE: Alternate Cold Joint Location Wed, 23 May 2007 12:27:20 -0600
  • RE: steel - vibration analysis Fri, 1 Jun 2007 11:41:45 -0600
  • RE: Code Costs, Redux Tue, 5 Jun 2007 11:16:36 -0600
  • RE: ASCE 7-05 Errors Mon, 11 Jun 2007 14:05:13 -0600

• Eknrinc
  • Gas Turbine Short-Circuit Foundation Design Factor of Safety / Guidelines Thu, 31 May 2007 10:40:02 -0600

• engineer 98225
  • RE: conduits in footings - thoughts? Tue, 10 Apr 2007 14:19:42 -0600

• Eric Tompos
  • Unbalanced Snow Loads Thu, 7 Jun 2007 21:37:18 -0600

• Fred Turner
  • Rationale for Sprinklers on Steel Bridges Thu, 3 May 2007 09:57:03 -0600

• G Vishwanath
  • OFF-TOPIC- Virginia Shootings Tue, 17 Apr 2007 23:38:34 -0600
  • Off Topic :Vish seeks advice/suggestions Fri, 11 May 2007 00:39:34 -0600
  • ProgeCAD Smart, Books and Pencils Mon, 21 May 2007 01:56:53 -0600
  • RE: Steel-Detail: ProgeCAD Smart, Books and Pencils Mon, 21 May 2007 06:41:32 -0600
  • Night Shift duty for my computer Wed, 30 May 2007 06:02:05 -0600
  • Re: Night Shift duty for my computer - and beyond... Fri, 1 Jun 2007 04:58:52 -0600
  • RE: Standard format of submission of structural design Tue, 5 Jun 2007 08:12:08 -0600

• G. Bunkers
  • Stone House Mon, 9 Apr 2007 12:18:41 -0600

• Ganesh Thia
  • Retaining wall extremes Thu, 17 May 2007 08:17:54 -0600
  • Re: Retaining wall extremes Fri, 18 May 2007 05:44:15 -0600
  • Re: SAP SHELL DESIGN Sun, 20 May 2007 10:22:51 -0600
  • Re: fillet welding Thu, 31 May 2007 20:36:49 -0600

• Ganesh Thiagarajan
  • Re: Site Specific Analysis Sds and Sd1 values Thu, 12 Apr 2007 17:02:27 -0600

• Garner, Robert
  • RE: Stone House Tue, 10 Apr 2007 12:45:56 -0600
  • RE: SHOOTINGS Tue, 24 Apr 2007 16:11:35 -0600
  • Alternate Design Method Wed, 2 May 2007 13:03:57 -0600
  • RE: welding spec for appearance Thu, 3 May 2007 07:55:22 -0600
  • RE: ASCE 7-05 Wind Load and Publication Costs Wed, 9 May 2007 10:01:10 -0600
  • RE: roof truss daiphragm forces Fri, 18 May 2007 08:59:24 -0600
  • RE: Retaining wall extremes Fri, 18 May 2007 09:11:44 -0600
  • RE: Retaining wall extremes Fri, 18 May 2007 09:45:21 -0600
  • RE: Alternate Cold Joint Location Tue, 22 May 2007 16:43:54 -0600
  • ASCE 7-05 Errors Wed, 6 Jun 2007 15:15:37 -0600
  • ASCE 7-05 Errors Thu, 7 Jun 2007 11:36:09 -0600
  • RE: Torquing of bolts by the bolt head Thu, 7 Jun 2007 14:42:49 -0600
  • RE: Code errata Fri, 8 Jun 2007 12:07:15 -0600
  • RE: Wind Load - Gas Station Overhead Wed, 13 Jun 2007 08:08:59 -0600
  • RE: Cracking Moment Thu, 14 Jun 2007 16:55:39 -0600
  • RE: Dumb Question Fri, 15 Jun 2007 11:56:15 -0600
  • RE: ARCHIT FEES Thu, 28 Jun 2007 07:55:40 -0600

• Gary L. Hodgson and Assoc.
  • Re: Lumber Species in Phoenix Wed, 4 Apr 2007 05:37:01 -0600
  • Re: new PE forming partnership Fri, 6 Apr 2007 04:33:35 -0600
  • Re: Stone house Fri, 6 Apr 2007 04:35:46 -0600
  • Re: Stone house Sat, 7 Apr 2007 06:30:51 -0600
  • Re: Stone house Sat, 7 Apr 2007 06:33:35 -0600
  • Re: Stone house Sat, 7 Apr 2007 06:44:28 -0600
  • Re: Horizontal reinforcing in IBC foundation walls Thu, 12 Apr 2007 06:09:14 -0600
  • Re: Gantry Crane Rail Blockout Fri, 20 Apr 2007 05:41:10 -0600
  • Re: SHOOTINGS Fri, 20 Apr 2007 05:52:31 -0600
  • Re: SHOOTINGS Tue, 24 Apr 2007 05:41:57 -0600
  • Re: SHOOTINGS Wed, 25 Apr 2007 05:22:41 -0600
  • Re: Using steel chains as concrete reinforcement?? Sat, 28 Apr 2007 06:40:30 -0600
  • Re: Alternate design method Thu, 3 May 2007 05:40:23 -0600
  • Re: Chinese Building Code Fri, 11 May 2007 05:57:01 -0600
  • Re: ASCE 7-05 Wind Load and Publication Costs Fri, 11 May 2007 06:19:09 -0600
  • Re: Beveled Washers for MC Channels Wed, 16 May 2007 05:34:57 -0600
  • Re: SAP SHELL DESIGN Mon, 21 May 2007 07:19:25 -0600
  • Re: Alternate Cold Joint Location Wed, 23 May 2007 12:19:03 -0600
  • Re: Sulphur Pit Roof Emergency Fri, 25 May 2007 05:28:44 -0600
  • Re: Night Shift duty for my computer - and beyond... Fri, 1 Jun 2007 05:51:37 -0600
  • Re: Mechanical Room Explosion Resistant Construction Tue, 12 Jun 2007 05:41:40 -0600
  • Floating Slab for Residence Fri, 15 Jun 2007 05:37:41 -0600

• Gary Loomis
  • RE: Bar Joist Fri, 6 Apr 2007 13:09:44 -0600
  • RE: Stone house Sat, 7 Apr 2007 01:43:10 -0600
  • RE: Stone house Mon, 9 Apr 2007 06:54:34 -0600
  • RE: Manufactured housing foundations Wed, 25 Apr 2007 12:49:31 -0600
  • RE: Manufactured housing foundations Thu, 26 Apr 2007 14:40:32 -0600
  • RE: Alternate design method Tue, 1 May 2007 15:16:48 -0600
  • RE: "Certifying" Lifting Plates Tue, 1 May 2007 19:35:53 -0600
  • RE: "Certifying" Lifting Plates Wed, 2 May 2007 08:29:15 -0600

• garyg
  • Re: COPIES OF PLANS Sun, 8 Apr 2007 22:16:54 -0600
  • LL on roof with solar panels. Fri, 15 Jun 2007 09:36:11 -0600
  • RE: LL on roof with solar panels. Fri, 15 Jun 2007 11:52:00 -0600

• Gautam Manandhar
  • RE: Backing bar in RBS steel moment connection Mon, 7 May 2007 15:56:00 -0600
  • RE: Can anyone use a summer intern Mon, 14 May 2007 13:12:34 -0600

• Gerard Madden, SE
  • Re: Geotech Reports Tue, 3 Apr 2007 23:39:24 -0600
  • Re: Finally a Little Recognition !! Wed, 4 Apr 2007 13:04:08 -0600
  • Re: Garage sizes Thu, 12 Apr 2007 16:25:19 -0600
  • Re: SHOOTINGS Tue, 24 Apr 2007 15:21:13 -0600
  • Re: SHOOTINGS Tue, 24 Apr 2007 16:32:17 -0600
  • Re: SHOOTINGS Tue, 24 Apr 2007 17:23:27 -0600
  • Re: beam camber... Mon, 30 Apr 2007 18:47:27 -0600
  • Re: why the moment frame must be capable to resist at least 25% of lateral loads؟ Thu, 3 May 2007 11:41:19 -0600
  • Re: Chinese Building Code Thu, 10 May 2007 16:39:58 -0600
  • Re: Chinese Building Code Thu, 10 May 2007 17:02:11 -0600
  • Bout Time Thu, 10 May 2007 18:05:20 -0600
  • Re: roller coaster supporting structure Thu, 10 May 2007 18:26:44 -0600
  • Re: Off Topic :Vish seeks advice/suggestions Fri, 11 May 2007 10:45:20 -0600
  • Re: NEWSHOUR report on the MacArthur Maze freeway collapse Fri, 11 May 2007 11:16:22 -0600
  • Re: roller coaster supporting structure Fri, 11 May 2007 11:26:45 -0600
  • Re: NEWSHOUR report on the MacArthur Maze freeway collapse Fri, 11 May 2007 11:42:59 -0600
  • Re: What do call your EITs? Mon, 14 May 2007 11:59:01 -0600
  • Re: Structural Question about beam secured to top of proprietary shear wall panel. Tue, 15 May 2007 01:20:00 -0600
  • Re: roof truss daiphragm forces Thu, 17 May 2007 10:31:54 -0600
  • Re: Subject: Re: roof truss daiphragm forces Thu, 17 May 2007 18:41:04 -0600
  • Re: Seminars Fri, 18 May 2007 18:12:51 -0600
  • Re: SAP SHELL DESIGN Mon, 21 May 2007 10:17:11 -0600
  • Re: SAP SHELL DESIGN / Steel factory Wed, 23 May 2007 02:17:47 -0600
  • 9-11 Wackos Fri, 25 May 2007 09:56:16 -0600
  • Re: 9-11 Wackos Fri, 25 May 2007 11:00:48 -0600
  • Re: 9-11 Wackos Fri, 25 May 2007 11:32:03 -0600
  • Re: 9-11 Wackos Fri, 25 May 2007 12:53:55 -0600
  • Re: 9-11 Wackos Fri, 25 May 2007 12:57:09 -0600
  • Re: 9-11 Wackos Fri, 25 May 2007 13:15:19 -0600
  • Re: 9-11 Wackos Fri, 25 May 2007 15:11:23 -0600
  • Re: 9-11 Wackos Fri, 25 May 2007 18:42:19 -0600
  • Re: 9-11 Wackos Fri, 25 May 2007 21:21:27 -0600
  • Re: 9-11 Wackos Sat, 26 May 2007 15:45:27 -0600
  • Re: ASCE 7-05 Errors Thu, 7 Jun 2007 12:18:37 -0600
  • Rooftop Seismic Anchorage Tue, 12 Jun 2007 11:41:18 -0600
  • Re: Rooftop Seismic Anchorage Tue, 12 Jun 2007 19:28:50 -0600
  • Re: Rooftop Seismic Anchorage Wed, 13 Jun 2007 11:48:06 -0600
  • Re: Sole plate nailing Thu, 14 Jun 2007 11:52:23 -0600
  • Re: Problem with SE Reference Sat, 16 Jun 2007 14:51:46 -0600
  • Aluminum Lag Bolts Fri, 22 Jun 2007 16:57:40 -0600
  • Re: Aluminum Lag Bolts Sat, 23 Jun 2007 22:34:24 -0600
  • Re: Aluminum Lag Bolts Mon, 25 Jun 2007 11:45:14 -0600
  • Re: ARCHIT FEES Thu, 28 Jun 2007 13:12:27 -0600

• Gil Brock
  • Re: SHOOTINGS Thu, 19 Apr 2007 21:54:18 -0600
  • Re: Chinese Building Code Thu, 10 May 2007 18:23:57 -0600

• gina gobo
  • conduits in footings - thoughts? Tue, 10 Apr 2007 12:49:00 -0600

• gloomis
  • RE: Standard format of submission of structural design calculations. Mon, 4 Jun 2007 07:00:50 -0600
  • RE: Powder Post Beetle Deterioration Mon, 18 Jun 2007 13:40:46 -0600

• Greene, Al [PTS]
  • RE: "Certifying" Lifting Plates Wed, 2 May 2007 08:09:13 -0600

• gskwy
  • Concrete Masonry Walls Tue, 5 Jun 2007 13:25:26 -0600

• Harold Sprague
  • Re: Stone house Fri, 6 Apr 2007 18:54:34 -0600
  • Virginia Tech Campus tragedy Mon, 16 Apr 2007 17:18:15 -0600
  • Re: Manufactured housing foundations Thu, 26 Apr 2007 14:01:25 -0600
  • RE: Manufactured housing foundations Thu, 26 Apr 2007 15:06:52 -0600
  • RE: Traprock Finish Wed, 16 May 2007 09:44:35 -0600
  • RE: Beveled Washers for MC Channels Wed, 16 May 2007 09:47:53 -0600
  • RE: Beveled Washers for MC Channels Wed, 16 May 2007 09:56:44 -0600
  • Structures Congress Wed, 16 May 2007 10:00:52 -0600
  • RE: Backing bar in RBS steel moment connection Mon, 21 May 2007 08:55:51 -0600
  • RE: Sheffield Joists Fri, 25 May 2007 14:00:20 -0600
  • RE: FOUNDATIONS: Warranty for Drilled Pier/Shaft Foundation Installation Tue, 29 May 2007 08:39:37 -0600
  • Re: Large Bay 'X' Bracing Tue, 29 May 2007 17:31:03 -0600
  • RE: Code Costs, Redux Sun, 3 Jun 2007 23:46:47 -0600
  • RE: Torquing of bolts by the bolt head Thu, 7 Jun 2007 19:36:04 -0600
  • RE: Glass railing Thu, 7 Jun 2007 19:44:07 -0600
  • RE: super flat floors Sun, 10 Jun 2007 12:55:52 -0600
  • RE: Steel Properties for SAE 1045 at Higher Temperatures Fri, 15 Jun 2007 21:11:44 -0600
  • RE: turn of the nut Fri, 15 Jun 2007 21:17:15 -0600
  • RE: ASCE 7-05 Errors Mon, 18 Jun 2007 00:49:22 -0600
  • RE: dead end slab control joint Mon, 18 Jun 2007 00:58:20 -0600
  • RE: ASCE 7-05 Errors Mon, 18 Jun 2007 21:12:34 -0600
  • RE: light gage zee shapes Thu, 21 Jun 2007 00:12:09 -0600
  • Re: light gage zee shapes Thu, 21 Jun 2007 13:05:18 -0600

• Harris, Brian
  • RE: What do call your EITs? Mon, 14 May 2007 15:12:09 -0600

• HBAP
  • ENERCALC retainign wall design Wed, 20 Jun 2007 11:43:16 -0600

• Henry Fairbairn
  • RE: Alternate Cold Joint Location Tue, 22 May 2007 16:05:04 -0600
  • Re: [RE]Various Job Vacancy Mon, 25 Jun 2007 18:28:01 -0600

• Hery Litman-Cleper
  • California Amendments to the 2006 IBC Thu, 10 May 2007 12:19:34 -0600
  • RE: California Amendments to the 2006 IBC Thu, 10 May 2007 12:38:42 -0600

• Himat Solanki
  • Re: bearing capacity equation Thu, 12 Apr 2007 08:59:32 -0600
  • RE: bearing capacity equation Thu, 12 Apr 2007 09:52:30 -0600

• hossein mardanlo
  • Searching for books and specially solved problems Mon, 2 Apr 2007 01:27:31 -0600
  • Invitation to ETABS2000 discusssion forum Mon, 16 Apr 2007 10:13:09 -0600
  • why the moment frame must be capable to resist at least 25% of lateral loads؟ Thu, 3 May 2007 05:07:25 -0600
  • Re: why the moment frame must be capable to resist at least 25% of lateral loads? Sat, 5 May 2007 08:48:44 -0600
  • Searching for free downloadble books Sat, 5 May 2007 08:49:28 -0600
  • Invitation to ETABS2000 discusssion forum Sat, 5 May 2007 08:59:52 -0600
  • Steel factory Sat, 19 May 2007 05:21:28 -0600
  • SAP SHELL DESIGN Sat, 19 May 2007 05:22:36 -0600
  • Re: Steel factory Sun, 20 May 2007 09:30:54 -0600
  • Re: SAP SHELL DESIGN Sun, 20 May 2007 09:45:11 -0600
  • Re: SAP SHELL DESIGN Mon, 21 May 2007 09:02:45 -0600
  • Re: Steel factory Mon, 21 May 2007 09:05:28 -0600
  • Re: SAP SHELL DESIGN / Steel factory Tue, 22 May 2007 15:36:01 -0600
  • Torsional buckling of columns Mon, 4 Jun 2007 02:15:28 -0600
  • Fw: [ETABS,SAFE,SAP] Property modifier of concrete sections in frequency calculations and p-delta effect Thu, 21 Jun 2007 11:45:25 -0600

• Ibrahim Mohammad
  • Using steel chains as concrete reinforcement?? Fri, 27 Apr 2007 08:03:50 -0600

• IRV FRUCHTMAN
  • Braced Wall vs Shear Wall Mon, 11 Jun 2007 10:58:26 -0600
  • RE: Braced Wall vs Shear Wall Mon, 11 Jun 2007 15:49:30 -0600

• j.n.sigalas
  • [no subject] Thu, 19 Apr 2007 06:08:45 -0600

• Jake Watson
  • Re: Cranked Beam supported at blockwalls Wed, 18 Apr 2007 06:59:43 -0600
  • CA SE Exam Wed, 13 Jun 2007 09:14:01 -0600

• James Getaz
  • Re: Parking Garage Occupancy Category Sat, 19 May 2007 15:56:59 -0600

• Jared Keyser
  • Galvanized Steel Tube Column Tue, 1 May 2007 18:31:02 -0600
  • Galvanized Steel Tube Column Wed, 2 May 2007 10:04:52 -0600
  • Roof Panel Safety Factors Thu, 31 May 2007 10:30:00 -0600

• Jason Christensen
  • RE: SHOOTINGS Tue, 24 Apr 2007 17:29:59 -0600
  • RE: File with xmcd extension Tue, 5 Jun 2007 12:28:13 -0600

• Jay Shilstone
  • Re: Concrete PH question Fri, 25 May 2007 09:59:41 -0600

• JC Wish L
  • roller coaster supporting structure Thu, 10 May 2007 18:04:07 -0600
  • Re: roller coaster supporting structure Fri, 11 May 2007 04:34:57 -0600
  • Re: roller coaster supporting structure Fri, 11 May 2007 18:14:44 -0600

• jeff . giger
  • Jeff Giger/DAN/Minerals/METSO is out of the office. Sat, 28 Apr 2007 01:15:10 -0600
  • Powder Post Beetle Deterioration Mon, 18 Jun 2007 07:29:02 -0600

• Jim Bessley
  • Alternate design method Tue, 1 May 2007 14:36:33 -0600
  • Re: Alternate design method Tue, 1 May 2007 15:42:52 -0600
  • Re: Alternate design method Tue, 1 May 2007 18:40:46 -0600
  • Re: Alternate design method Wed, 2 May 2007 07:57:29 -0600
  • Re: Alternate Design Method Wed, 2 May 2007 13:32:06 -0600
  • Plywood over light gage shear wall Tue, 22 May 2007 15:21:38 -0600
  • Re: Plywood over light gage shear wall Wed, 23 May 2007 12:34:04 -0600
  • Re: Plywood over light gage shear wall Wed, 23 May 2007 13:16:53 -0600
  • Re: Plywood over light gage shear wall Fri, 25 May 2007 07:49:38 -0600

• Jim Chatterley PE
  • Lack of Acceptable Cyclic Racking Shear Testing Protocol >> Major problems for Structural Innovation Tue, 12 Jun 2007 23:21:18 -0600

• Jim Getaz
  • [no subject] Tue, 3 Apr 2007 06:29:25 -0600
  • Re: Tilt-Up Beam Connection Detail Mon, 16 Apr 2007 05:31:55 -0600
  • Re: Gantry Crane Rail Blockout Thu, 19 Apr 2007 05:20:31 -0600
  • Re: Concrete Overlay Tue, 8 May 2007 05:46:47 -0600
  • Re: ACI318-05: Minimum Reinforcements Wed, 9 May 2007 05:43:30 -0600
  • Re: Structures Congress Thu, 17 May 2007 11:56:37 -0600

• Jim Lutz
  • Geotech Reports Mon, 2 Apr 2007 09:23:47 -0600
  • Stone House Mon, 9 Apr 2007 09:37:04 -0600
  • ASCE 7-05 Wind Load and Publication Costs Wed, 9 May 2007 09:33:21 -0600
  • Wind Load - Gas Station Overhead Thu, 14 Jun 2007 14:46:25 -0600
  • New Yorker Article Mon, 25 Jun 2007 09:24:03 -0600

• Jim Wilson
  • Horizontal reinforcing in IBC foundation walls Wed, 11 Apr 2007 08:55:22 -0600
  • Re: Horizontal reinforcing in IBC foundation walls Wed, 11 Apr 2007 11:03:29 -0600
  • Placing concrete walls on footings before 7 days Thu, 17 May 2007 07:57:44 -0600
  • Re: Placing concrete walls on footings before 7 days Mon, 21 May 2007 20:27:57 -0600

• Jimenez, Jorge A.
  • RE: Spread sheet for Torion in RC beams Thu, 12 Apr 2007 06:37:05 -0600

• Jnapd
  • Re: Alternate Cold Joint Location Tue, 22 May 2007 16:03:30 -0600
  • Re: High lift grouting Fri, 25 May 2007 12:46:52 -0600

• Joel Adair
  • RE: Using steel chains as concrete reinforcement?? Fri, 27 Apr 2007 13:04:47 -0600

• Joel gordon
  • RE: 9-11 Wackos Fri, 25 May 2007 13:35:29 -0600

• John Atilano
  • RE: 2006 IBC Seismic Map CD Thu, 28 Jun 2007 12:50:46 -0600

• John Whitty
  • Castellated Beam Tables Tue, 15 May 2007 15:25:32 -0600

• Jordan Truesdell, PE
  • Re: Lumber Species in Phoenix Mon, 2 Apr 2007 13:34:17 -0600
  • Re: Geotech Reports Wed, 4 Apr 2007 05:52:35 -0600
  • Re: Stone house Fri, 6 Apr 2007 07:14:09 -0600
  • Re: Bar Joist Fri, 6 Apr 2007 12:01:39 -0600
  • Re: curved wood sw Tue, 10 Apr 2007 09:37:33 -0600
  • Re: Horizontal reinforcing in IBC foundation walls Wed, 11 Apr 2007 10:40:53 -0600
  • Re: Garage sizes Thu, 12 Apr 2007 17:04:18 -0600
  • Re: Converting PLT files or AutoCad output to TIFF format Sat, 14 Apr 2007 17:52:05 -0600
  • Re: Virgina Tech Campus - student opens fire this morning. Mon, 16 Apr 2007 18:41:40 -0600
  • Virginia Tech Wed, 18 Apr 2007 06:01:50 -0600
  • Re: Copying sealed PE work for personal records Wed, 18 Apr 2007 13:50:08 -0600
  • Re: Copying sealed PE work for personal records Thu, 19 Apr 2007 05:17:43 -0600
  • Let the floodgates open (was: SHOOTINGS) Tue, 24 Apr 2007 19:59:45 -0600
  • Re: Let the floodgates open Wed, 25 Apr 2007 05:39:12 -0600
  • Manufactured housing foundations Wed, 25 Apr 2007 11:45:11 -0600
  • Re: Below Grade Garage Walls contribution to Lateral Loads Thu, 26 Apr 2007 05:51:37 -0600
  • Re: Manufactured housing foundations Thu, 26 Apr 2007 14:58:27 -0600
  • Re: Using steel chains as concrete reinforcement?? Fri, 27 Apr 2007 11:07:23 -0600
  • Re: Using steel chains as concrete reinforcement?? Fri, 27 Apr 2007 11:15:50 -0600
  • Re: Alternate design method Wed, 2 May 2007 05:46:22 -0600
  • Re: ASCE 7-05 Wind Load and Publication Costs Wed, 9 May 2007 14:15:05 -0600
  • Re: roller coaster supporting structure Fri, 11 May 2007 06:32:16 -0600
  • Re: Cost of codes (was RE: ASCE 7-05 Wind Load and Publication Costs) Fri, 11 May 2007 06:44:24 -0600
  • What do call your EITs? Mon, 14 May 2007 07:58:28 -0600
  • Re: What do call your EITs? Mon, 14 May 2007 13:30:23 -0600
  • Re: What do call your EITs? Mon, 14 May 2007 14:16:01 -0600
  • Re: What do call your EITs? Mon, 14 May 2007 16:48:35 -0600
  • Any VA engineers out there... Fri, 18 May 2007 10:37:12 -0600
  • Re: Any VA engineers out there... Fri, 18 May 2007 11:57:31 -0600
  • Re: Sulphur Pit Roof Emergency Thu, 24 May 2007 07:35:53 -0600
  • Re: strengthening of floor joists with FRP's?? Mon, 4 Jun 2007 13:12:23 -0600
  • Re: Using Dynamic Load Information Wed, 6 Jun 2007 07:11:46 -0600
  • Re: ASCE 7-05 Errors Thu, 7 Jun 2007 05:51:32 -0600
  • Re: ASCE 7-05 Errors Thu, 7 Jun 2007 09:25:47 -0600
  • Re: steel - vibration analysis Tue, 12 Jun 2007 05:43:43 -0600
  • Re: Structural Can of Worms Tue, 12 Jun 2007 10:45:05 -0600
  • Re: steel - vibration analysis Tue, 12 Jun 2007 22:22:45 -0600
  • Re: Sole plate nailing Thu, 14 Jun 2007 12:27:04 -0600
  • Re: LL on roof with solar panels. Fri, 15 Jun 2007 13:34:53 -0600
  • Re: Architectural Fees for Residential projects Wed, 27 Jun 2007 13:29:31 -0600
  • Re: ARCHIT FEES Thu, 28 Jun 2007 06:21:00 -0600
  • Re: ARCHIT FEES Thu, 28 Jun 2007 09:22:08 -0600
  • Re: REVIT Thu, 28 Jun 2007 11:53:42 -0600
  • Re: REVIT Thu, 28 Jun 2007 13:36:48 -0600
  • Re: REVIT Thu, 28 Jun 2007 14:15:12 -0600

• joseph goldbronn
  • Garage sizes Thu, 12 Apr 2007 10:30:05 -0600
  • RE: Cripple wall stud length Mon, 4 Jun 2007 08:37:11 -0600

• Joseph Grill
  • Re: Lumber Species in Phoenix Tue, 3 Apr 2007 08:14:36 -0600

• Joseph Harouni
  • Re: REVIT or (ArchiCad) Thu, 28 Jun 2007 10:36:24 -0600

• Joseph R. Grill
  • Re: ARCHIT FEES Thu, 28 Jun 2007 09:27:32 -0600

• Josh Comfort
  • RE: Using steel chains as concrete reinforcement?? Fri, 27 Apr 2007 10:58:43 -0600
  • RE: 9-11 Wackos Fri, 25 May 2007 10:46:49 -0600
  • RE: Concrete Masonry Walls Wed, 6 Jun 2007 13:09:40 -0600
  • RE: Sole plate nailing Thu, 14 Jun 2007 10:48:57 -0600
  • RE: 2006 IBC Seismic Map CD Thu, 28 Jun 2007 12:18:38 -0600

• Josh Plummer
  • RE: steel - vibration analysis Thu, 31 May 2007 20:48:12 -0600
  • RE: steel - vibration analysis Mon, 11 Jun 2007 22:15:30 -0600
  • RE: steel - vibration analysis Tue, 12 Jun 2007 21:25:24 -0600
  • RE: steel - vibration analysis Wed, 13 Jun 2007 06:46:54 -0600
  • RE: steel -vibration analysis Wed, 20 Jun 2007 20:09:58 -0600

• jsgiron
  • Re: Lumber Species in Phoenix Sat, 7 Apr 2007 14:59:33 -0600

• Jun Navaro
  • Re: Converting PLT files or AutoCad output to TIFF format Thu, 19 Apr 2007 08:49:11 -0600
  • Re: Converting PLT files or AutoCad output to TIFF format Mon, 23 Apr 2007 04:07:26 -0600
  • [RE]Various Job Vacancy Mon, 25 Jun 2007 18:00:27 -0600

• Kevin Below
  • Re: Ice Melt Mat Tue, 3 Apr 2007 20:36:09 -0600
  • Re: cantilever T-beam Tue, 3 Apr 2007 20:49:23 -0600
  • Re: Geotech Reports Tue, 3 Apr 2007 21:03:05 -0600
  • Re: Geotech Reports Fri, 6 Apr 2007 22:18:07 -0600

• KIRTESH A GANDHI
  • ASCE 7-05 Wind Load - Simplified Methods by S.K. Ghosh in GoStructural.com Tue, 8 May 2007 21:19:15 -0600

• Larry Hauer
  • RE: roller coaster supporting structure Fri, 11 May 2007 08:12:07 -0600
  • RE: Wood header out of plane load Wed, 23 May 2007 20:39:01 -0600
  • RE: Cripple wall stud length Sat, 2 Jun 2007 08:39:38 -0600
  • RE: ASCE 7-05 Errors Thu, 7 Jun 2007 15:33:37 -0600
  • RE: LL on roof with solar panels. Sat, 16 Jun 2007 08:55:05 -0600
  • Maps of earthquake accelerations Wed, 20 Jun 2007 14:32:47 -0600
  • RE: New Yorker Article Tue, 26 Jun 2007 08:08:12 -0600

• ld
  • some forum? re lateral bracing?? I DO NOT BELONG HERE!!!!!!!!!!!!!! Wed, 30 May 2007 08:57:09 -0600

• Lloyd Pack
  • RE: ASCE 7-05 Wind Load and Publication Costs Thu, 10 May 2007 14:48:24 -0600

• Luz-Renaissance
  • RE: ASCE 7-05 Errors Mon, 18 Jun 2007 21:25:03 -0600
  • Various Job Vacancy Mon, 25 Jun 2007 01:23:52 -0600

• M. David Finley, P.E., P.A.
  • Train Loading & Box Culvert Program Thu, 12 Apr 2007 06:44:09 -0600
  • RE: Cost of codes (was RE: ASCE 7-05 Wind Load and Publication Costs) Fri, 11 May 2007 06:28:18 -0600

• Mark E. Deardorff
  • RE: What do call your EITs? Mon, 14 May 2007 11:45:24 -0600
  • RE: Tilt-Up Wall Pier Design Tue, 15 May 2007 13:17:39 -0600
  • RE: Special Inspections and Insurance Thu, 17 May 2007 07:23:00 -0600
  • RE: Seminars Fri, 18 May 2007 15:02:45 -0600
  • RE: High lift grouting Fri, 25 May 2007 11:42:44 -0600
  • RE: 9-11 Wackos Fri, 25 May 2007 13:28:16 -0600
  • RE: File with xmcd extension Tue, 5 Jun 2007 12:17:01 -0600
  • RE: ASCE 7-05 Errors Thu, 7 Jun 2007 14:27:47 -0600
  • RE: Sole plate nailing Thu, 14 Jun 2007 09:36:35 -0600
  • RE: RISA Results Thu, 14 Jun 2007 12:26:38 -0600
  • RE: Cracking Moment Thu, 14 Jun 2007 13:55:54 -0600
  • RE: LL on roof with solar panels. Fri, 15 Jun 2007 09:43:19 -0600
  • RE: Dumb Question Fri, 15 Jun 2007 10:37:44 -0600
  • RE: LL on roof with solar panels. Fri, 15 Jun 2007 10:41:19 -0600
  • RE: electronic signature Fri, 22 Jun 2007 09:08:11 -0600
  • RE: 2001 CBC Chapter A Fri, 22 Jun 2007 09:21:19 -0600
  • RE: 2001 CBC Chapter A Fri, 22 Jun 2007 09:48:48 -0600
  • RE: ICC / ICBO Reports Fri, 22 Jun 2007 10:27:33 -0600
  • RE: electronic signature Fri, 22 Jun 2007 10:45:00 -0600

• Mark Gilligan
  • Re: COPIES OF PLANS Sat, 7 Apr 2007 13:36:35 -0600
  • RE: California Bearing Ratio Fri, 13 Apr 2007 02:15:15 -0600
  • Re: Using steel chains as concrete reinforcement?? Sat, 28 Apr 2007 01:21:03 -0600
  • Re: bay bridge Wed, 2 May 2007 00:26:04 -0600
  • Re: bay bridge Wed, 2 May 2007 09:17:02 -0600
  • RE: Special Inspections and Insurance Thu, 17 May 2007 07:41:23 -0600
  • Re: Roof panel safety factors Thu, 31 May 2007 00:18:53 -0600
  • RE: Concrete Masonry Walls Tue, 5 Jun 2007 23:29:48 -0600
  • RE: Floating Slab for Residence Fri, 15 Jun 2007 08:53:42 -0600
  • RE: ASCE 7-05 Errors Mon, 18 Jun 2007 02:18:42 -0600
  • RE: ASCE 7-05 Errors Mon, 18 Jun 2007 09:50:28 -0600
  • RE: ASCE 7-05 Errors Tue, 19 Jun 2007 01:11:17 -0600

• Mark Johnson
  • Re: Converting PLT files or AutoCad output to TIFF format Wed, 18 Apr 2007 11:25:00 -0600
  • Re: Converting PLT files or AutoCad output to TIFF format Mon, 23 Apr 2007 09:10:19 -0600
  • RE: ASCE 7-05 Errors Sun, 17 Jun 2007 12:42:49 -0600
  • Opinions on "Multiframe" Mon, 18 Jun 2007 13:12:24 -0600

• Mark L. Puccio
  • Wood header out of plane load Wed, 23 May 2007 15:14:14 -0600
  • dead end slab control joint Sat, 16 Jun 2007 13:15:58 -0600

• Marlou Rodriguez
  • Articles on soil vibrations from rollers Tue, 22 May 2007 17:02:47 -0600
  • RE: Articles on soil vibrations from rollers Tue, 22 May 2007 17:11:58 -0600
  • RE: Opinions on "Multiframe" Mon, 18 Jun 2007 14:40:57 -0600
  • RE: electronic signature Fri, 22 Jun 2007 11:14:55 -0600

• Martin Li
  • RE: Chinese Building Code Fri, 11 May 2007 10:59:08 -0600
  • RE: Chinese Building Code Fri, 11 May 2007 14:19:44 -0600
  • RE: Concrete Masonry Walls Tue, 5 Jun 2007 13:49:31 -0600
  • RE: Floating Slab for Residence Fri, 15 Jun 2007 07:58:31 -0600

• Mauricio Castro
  • Old Beam Wed, 20 Jun 2007 16:59:59 -0600

• Me
  • Below Grade Garage Walls contribution to Lateral Loads Wed, 25 Apr 2007 17:36:24 -0600

• Michael Hemstad
  • Lumber Species in Phoenix Mon, 2 Apr 2007 11:47:14 -0600
  • Stone House Tue, 10 Apr 2007 12:36:48 -0600
  • Base Plate Steel TIPS Report Tue, 10 Apr 2007 15:16:43 -0600
  • Using steel chains as concrete reinforcement?? Mon, 30 Apr 2007 11:27:47 -0600
  • Alternate Design Method Wed, 2 May 2007 11:31:08 -0600
  • Chinese Building Code Thu, 10 May 2007 14:21:23 -0600
  • Chinese Building Code Fri, 11 May 2007 09:59:47 -0600
  • Hollowcore Slab Diaphragm Connection Detailing Tue, 15 May 2007 09:13:11 -0600
  • Sheffield Joists Thu, 24 May 2007 11:05:56 -0600

• Michael Laplante
  • Aluminium and stainless steel. Mon, 23 Apr 2007 11:58:44 -0600
  • Torquing of bolts by the bolt head Thu, 7 Jun 2007 13:51:07 -0600

• MICHAEL LeCOMTE
  • Train Loading & Box Culvert Program Fri, 13 Apr 2007 07:07:44 -0600
  • Helical anchors in saturated soils Fri, 27 Apr 2007 06:20:28 -0600
  • Re: bay bridge Wed, 2 May 2007 05:49:51 -0600
  • Wind Load - Gas Station Overhead Wed, 13 Jun 2007 05:53:55 -0600

• Michel
  • Re: SAP SHELL DESIGN / Steel factory Tue, 22 May 2007 22:56:42 -0600

• Michel Blangy
  • RE: Finally a Little Recognition !! Wed, 4 Apr 2007 12:14:11 -0600
  • Terminator V: Home At Last Wed, 4 Apr 2007 14:24:54 -0600
  • RE: welding spec for appearance Thu, 3 May 2007 10:16:52 -0600
  • RE: Chinese Building Code Thu, 10 May 2007 16:33:26 -0600
  • RE: Chinese Building Code Thu, 10 May 2007 16:52:40 -0600
  • RE: Chinese Building Code Thu, 10 May 2007 17:37:52 -0600
  • RE: Retaining wall extremes Fri, 18 May 2007 09:02:52 -0600
  • RE: Backing bar in RBS steel moment connection Fri, 18 May 2007 13:12:42 -0600
  • RE: Backing bar in RBS steel moment connection Fri, 18 May 2007 16:09:08 -0600
  • RE: Alternate Cold Joint Location Tue, 22 May 2007 15:58:29 -0600
  • RE: Alternate Cold Joint Location Tue, 22 May 2007 16:01:24 -0600
  • RE: SAP SHELL DESIGN / Steel factory Thu, 24 May 2007 09:36:48 -0600
  • RE: turn of the nut Thu, 14 Jun 2007 11:36:26 -0600
  • Cracking Moment Thu, 14 Jun 2007 14:11:26 -0600
  • RE: Cracking Moment Thu, 14 Jun 2007 15:41:42 -0600
  • RE: Aluminum Lag Bolts Mon, 25 Jun 2007 09:07:36 -0600
  • RE: Architectural Fees for Residential projects Wed, 27 Jun 2007 16:55:34 -0600
  • RE: ARCHIT FEES Thu, 28 Jun 2007 10:07:49 -0600

• Michelle Motchos
  • RE: What do call your EITs? Mon, 14 May 2007 11:48:48 -0600
  • RE: super flat floors Fri, 8 Jun 2007 12:14:45 -0600

• mlcse
  • Re: Glass railing Thu, 7 Jun 2007 03:21:56 -0600
  • Re: Glass railing Thu, 7 Jun 2007 18:32:07 -0600

• Muhammad Amin
  • Standard format of submission of structural design calculations. Sun, 3 Jun 2007 19:11:05 -0600

• Nacionales Alex
  • Re: Converting PLT files or AutoCad output to TIFF format Sun, 22 Apr 2007 22:55:11 -0600

• ndz28
  • Re: ASCE 7-05 Errors Sat, 16 Jun 2007 17:35:41 -0600
  • Re: ASCE 7-05 Errors Sun, 17 Jun 2007 22:13:00 -0600

• Neil Moore
  • Re: Using steel chains as concrete reinforcement?? Mon, 30 Apr 2007 20:41:36 -0600
  • Re: Articles on soil vibrations from rollers Tue, 22 May 2007 17:10:00 -0600
  • RE: SAP SHELL DESIGN / Steel factory Thu, 24 May 2007 07:20:08 -0600

• Olexandre Bausk
  • Re: geotechnical software Thu, 12 Apr 2007 02:11:11 -0600
  • Re: Converting PLT files or AutoCad output to TIFF format Sat, 14 Apr 2007 14:06:18 -0600
  • Re: Converting PLT files or AutoCad output to TIFF format Mon, 23 Apr 2007 01:13:44 -0600
  • Re: Aluminium and stainless steel. Mon, 23 Apr 2007 12:15:37 -0600

• open . struct
  • Plasma cutters and steel quality / weld quality for SMRFs Thu, 12 Apr 2007 14:48:47 -0600

• Padmanabhan Rajendran
  • RE: ASCE 7-05 Wind Load and Publication Costs Wed, 9 May 2007 10:50:15 -0600
  • Re: Alternate Cold Joint Location Tue, 22 May 2007 16:18:35 -0600
  • RE: SAP SHELL DESIGN / Steel factory Thu, 24 May 2007 07:17:45 -0600
  • RE: SAP SHELL DESIGN / Steel factory Thu, 24 May 2007 07:18:54 -0600
  • Re: Large Bay 'X' Bracing Wed, 30 May 2007 06:48:33 -0600
  • Re: Large Bay 'X' Bracing Wed, 30 May 2007 07:02:10 -0600
  • RE: Lateral Resistance for Structured Pile Supported Foundation Wed, 30 May 2007 13:00:25 -0600
  • Re: light gage zee shapes Thu, 21 Jun 2007 10:43:17 -0600

• Paul Blomberg
  • Gantry Crane Rail Blockout Wed, 18 Apr 2007 16:57:32 -0600
  • Re: Gantry Crane Rail Blockout Thu, 19 Apr 2007 15:44:50 -0600
  • Re: Steel Member Check for Seismic Loading Thu, 3 May 2007 08:17:58 -0600
  • Re: welding spec for appearance Thu, 3 May 2007 08:22:21 -0600

• Paul Feather
  • RE: Copying sealed PE work for personal records Wed, 18 Apr 2007 09:39:53 -0600
  • RE: NEWSHOUR report on the MacArthur Maze freeway collapse Fri, 11 May 2007 11:37:03 -0600
  • RE: Lateral Resistance for Structured Pile Supported Foundation Wed, 30 May 2007 09:21:54 -0600

• Paul Ransom
  • Re: Large Bay 'X' Bracing Wed, 30 May 2007 07:05:07 -0600
  • Re: Opinions on "Multiframe" Tue, 19 Jun 2007 22:28:23 -0600

• Peterson Brian A PSNS C900
  • Concrete Overlay Mon, 7 May 2007 16:23:23 -0600

• Pinyon Engineering
  • roof truss daiphragm forces Thu, 17 May 2007 10:04:04 -0600
  • Subject: Re: roof truss daiphragm forces Thu, 17 May 2007 18:20:44 -0600
  • Fw: roof truss daiphragm forces Fri, 18 May 2007 08:25:59 -0600
  • Fw: roof truss daiphragm forces Sun, 20 May 2007 07:47:22 -0600
  • Turn of the nut Sat, 16 Jun 2007 11:46:15 -0600

• PLD
  • Copying sealed PE work for personal records Tue, 17 Apr 2007 17:21:02 -0600

• Rahe . Gruber
  • Rahe Gruber/AV/FD/FluorCorp is out of the office. Sun, 29 Apr 2007 02:03:14 -0600

• raincat1
  • Japanese Steel Shapes vs British Steel Shapes Mon, 7 May 2007 19:19:32 -0600
  • fillet welding Thu, 31 May 2007 18:06:04 -0600
  • turn of the nut Wed, 13 Jun 2007 17:29:48 -0600

• Ramy Shameia
  • FrameSolver 2D Mon, 28 May 2007 06:02:50 -0600

• Rand W Holtham
  • Castellated Beam Tables Wed, 16 May 2007 04:53:06 -0600
  • Diagonal base shear UBC 97 Wed, 30 May 2007 06:56:49 -0600
  • Re: Large Bay 'X' Bracing Wed, 30 May 2007 07:01:34 -0600
  • Re: Large Bay 'X' Bracing Wed, 30 May 2007 07:07:46 -0600
  • RE: Diagonal base shear UBC 97 Wed, 30 May 2007 08:26:20 -0600

• Raymond Shreenan
  • Re: SHOOTINGS Thu, 19 Apr 2007 21:26:43 -0600
  • Re: SHOOTINGS Thu, 19 Apr 2007 22:38:59 -0600
  • Re: SHOOTINGS Fri, 20 Apr 2007 14:43:55 -0600
  • Re: SHOOTINGS Tue, 24 Apr 2007 13:27:53 -0600
  • Re: SHOOTINGS Tue, 24 Apr 2007 14:27:48 -0600
  • Re: SHOOTINGS Tue, 24 Apr 2007 17:07:08 -0600
  • Re: SHOOTINGS Tue, 24 Apr 2007 19:40:30 -0600
  • Re: Manufactured housing foundations Thu, 26 Apr 2007 12:52:14 -0600
  • Mold growth Fri, 27 Apr 2007 14:37:34 -0600
  • Re: Mold growth Fri, 27 Apr 2007 20:57:39 -0600
  • Re: Articles on soil vibrations from rollers Wed, 23 May 2007 13:02:38 -0600

• Rbengrguy
  • Re: International EngineerAWARDS Sun, 8 Apr 2007 11:20:37 -0600
  • Re: YouTube-Gate Mon, 25 Jun 2007 04:11:13 -0600
  • PR Newswire news release: Busted! A Video Captures What Working America Mon, 25 Jun 2007 04:16:12 -0600

• refugio rochin
  • Re: Converting PLT files or AutoCad output to TIFF format Sat, 14 Apr 2007 15:43:06 -0600
  • Cranked Beam supported at blockwalls Sun, 15 Apr 2007 00:26:17 -0600
  • Re: Cranked Beam supported at blockwalls Sun, 15 Apr 2007 08:32:42 -0600
  • Re: Cranked Beam supported at blockwalls Wed, 18 Apr 2007 07:18:13 -0600
  • Re: Masonry Skewed Shear Walls Fri, 20 Apr 2007 04:52:56 -0600

• Reza Dashti Asl
  • RE: beam camber... Tue, 1 May 2007 13:08:52 -0600

• Rhkratzse
  • Re: Cranked Beam supported at blockwalls Sun, 15 Apr 2007 04:43:20 -0600
  • Re: VIRGINIA TECH Thu, 19 Apr 2007 13:23:13 -0600
  • NOW: Political debates Thu, 19 Apr 2007 13:31:19 -0600
  • Re: Gantry Crane Rail Blockout Thu, 19 Apr 2007 16:30:01 -0600
  • Re: GUN CONTROL Wed, 25 Apr 2007 17:38:52 -0600
  • Re: Using steel chains as concrete reinforcement?? Fri, 27 Apr 2007 08:52:05 -0600
  • Re: Using steel chains as concrete reinforcement?? Fri, 27 Apr 2007 14:32:42 -0600
  • Re: bay bridge Tue, 1 May 2007 22:30:13 -0600
  • Re: ASCE 7-05 Wind Load and Publication Costs -- "A Modest Proposal" Wed, 9 May 2007 10:44:34 -0600
  • Re: Chinese Building Code Thu, 10 May 2007 14:39:57 -0600
  • Re: Chinese Building Code Thu, 10 May 2007 14:42:38 -0600
  • NEWSHOUR report on the MacArthur Maze freeway collapse Thu, 10 May 2007 16:03:54 -0600
  • Re: NEWSHOUR report on the MacArthur Maze freeway collapse Thu, 10 May 2007 17:11:37 -0600
  • Re: Beveled Washers for MC Channels Wed, 16 May 2007 12:40:06 -0600
  • Re: Retaining wall extremes Fri, 18 May 2007 11:16:17 -0600
  • Re: Any VA engineers out there... Fri, 18 May 2007 11:49:47 -0600
  • Re: Alternate Cold Joint Location Tue, 22 May 2007 15:53:26 -0600
  • Re: 9-11 Wackos Fri, 25 May 2007 10:17:38 -0600
  • Cripple wall stud length Fri, 1 Jun 2007 10:26:07 -0600
  • Re: Cripple wall stud length Fri, 1 Jun 2007 10:56:43 -0600
  • Re: Cripple wall stud length Sat, 2 Jun 2007 09:34:01 -0600
  • Re: ASCE 7-05 Errors Wed, 6 Jun 2007 17:19:13 -0600
  • Re: Glass railing Redux Thu, 7 Jun 2007 18:50:44 -0600
  • Re: How do I put my question in this forum Thu, 7 Jun 2007 18:59:03 -0600
  • Re: Braced Wall vs Shear Wall Mon, 11 Jun 2007 11:05:51 -0600
  • Re: Sole plate nailing -- SDS screws, shiny? Thu, 14 Jun 2007 10:28:41 -0600
  • Re: Cracking Moment Thu, 14 Jun 2007 14:01:01 -0600
  • Re: dead end slab control joint Sat, 16 Jun 2007 14:05:42 -0600
  • Re: ASCE 7-05 Errors Mon, 18 Jun 2007 00:09:17 -0600
  • Re: dead end slab control joint Tue, 19 Jun 2007 10:00:20 -0600
  • Re: [RE]Various Job Vacancy (especially Henry and Jun) Mon, 25 Jun 2007 18:34:25 -0600
  • Re: ARCHIT FEES Thu, 28 Jun 2007 10:08:51 -0600

• Rich Lewis
  • Lumber Species in Phoenix Sun, 1 Apr 2007 20:30:38 -0600
  • RE: Lumber Species in Phoenix Tue, 3 Apr 2007 06:49:02 -0600
  • Tilt-Up Beam Connection Detail Sun, 15 Apr 2007 15:40:58 -0600
  • Traprock Finish Mon, 14 May 2007 20:39:45 -0600
  • Large Bay 'X' Bracing Tue, 29 May 2007 17:01:48 -0600
  • RE: Large Bay 'X' Bracing Thu, 31 May 2007 06:56:41 -0600
  • RE: Mechanical Room Explosion Resistant Construction Tue, 12 Jun 2007 12:02:42 -0600
  • RE: REVIT Sat, 30 Jun 2007 08:26:41 -0600

• Richard L. Hess
  • RE: SHOOTINGS Tue, 24 Apr 2007 18:21:42 -0600
  • RE: Mold growth Fri, 27 Apr 2007 16:29:45 -0600

• Robert Freeman
  • Stainless and Aluminum Mon, 23 Apr 2007 12:11:55 -0600
  • Gun control Tue, 24 Apr 2007 16:47:23 -0600
  • helical anchors Fri, 27 Apr 2007 09:46:28 -0600
  • masonry control joints Tue, 5 Jun 2007 13:45:54 -0600

• Robert Jonkman
  • RE: Maps of earthquake accelerations Wed, 20 Jun 2007 14:35:03 -0600

• Robert Kazanjy
  • Re: curved wood sw Mon, 9 Apr 2007 17:27:16 -0600
  • Re: SHOOTINGS Tue, 17 Apr 2007 17:48:03 -0600
  • Re: SHOOTINGS Tue, 24 Apr 2007 17:27:46 -0600
  • Re: SHOOTINGS Tue, 24 Apr 2007 17:38:40 -0600
  • Re: SHOOTINGS Tue, 24 Apr 2007 19:09:59 -0600
  • Re: Let the floodgates open (was: SHOOTINGS) Tue, 24 Apr 2007 22:46:07 -0600
  • Re: Beveled Washers for MC Channels Wed, 16 May 2007 19:59:51 -0600
  • Re: Beveled Washers for MC Channels Thu, 17 May 2007 09:23:27 -0600
  • Re: Plywood over light gage shear wall Wed, 23 May 2007 12:20:19 -0600
  • Re: Plywood over light gage shear wall Wed, 23 May 2007 12:46:57 -0600
  • Re: Plywood over light gage shear wall Wed, 23 May 2007 12:54:20 -0600
  • Re: SAP SHELL DESIGN / Steel factory Thu, 24 May 2007 08:31:02 -0600
  • Re: Plywood over light gage shear wall Thu, 24 May 2007 08:59:48 -0600
  • Re: Plywood over light gage shear wall Thu, 24 May 2007 09:03:42 -0600
  • Re: Sulphur Pit Roof Emergency Thu, 24 May 2007 09:34:33 -0600
  • Re: Plywood over light gage shear wall Thu, 24 May 2007 23:52:52 -0600
  • Re: OT: HP-750C Fri, 25 May 2007 18:01:35 -0600
  • Re: strengthening of floor joists with FRP's?? Sat, 2 Jun 2007 09:57:29 -0600
  • Re: strengthening of floor joists with FRP's?? Sat, 2 Jun 2007 10:18:43 -0600
  • Re: Cripple wall stud length Sat, 2 Jun 2007 10:27:38 -0600
  • Re: strengthening of floor joists with FRP's?? Sat, 2 Jun 2007 10:29:28 -0600
  • Re: strengthening of floor joists with FRP's?? Sat, 2 Jun 2007 10:34:17 -0600
  • Re: strengthening of floor joists with FRP's?? Sat, 2 Jun 2007 10:44:48 -0600
  • Re: strengthening of floor joists with FRP's?? Sat, 2 Jun 2007 10:49:59 -0600
  • Re: strengthening of floor joists with FRP's?? Mon, 4 Jun 2007 12:19:12 -0600
  • Re: Concrete Masonry Walls Wed, 6 Jun 2007 12:46:03 -0600
  • Re: AISI 12L14 Steel Fri, 8 Jun 2007 23:08:25 -0600
  • Re: AISI 12L14 Steel Sun, 10 Jun 2007 10:15:03 -0600
  • Re: turn of the nut Wed, 13 Jun 2007 17:58:32 -0600
  • Re: turn of the nut Wed, 13 Jun 2007 17:59:59 -0600
  • Re: turn of the nut Thu, 14 Jun 2007 12:03:58 -0600
  • Re: Opinions on "Multiframe" Mon, 18 Jun 2007 14:29:15 -0600
  • Re: Lag bolt removal and reinstallation Tue, 19 Jun 2007 19:03:01 -0600
  • Re: Lag bolt removal and reinstallation Wed, 20 Jun 2007 11:42:56 -0600
  • Re: light gage zee shapes Thu, 21 Jun 2007 07:38:55 -0600
  • Re: Aluminum Lag Bolts Fri, 22 Jun 2007 21:26:01 -0600

• Romel Gomez
  • California Bearing Ratio Thu, 12 Apr 2007 23:00:05 -0600
  • Use of Slurry Seal (SS-1) as Prime Coat Wed, 6 Jun 2007 18:29:24 -0600

• S. Gordin
  • COPIES OF PLANS Sat, 7 Apr 2007 09:59:45 -0600
  • Re: COPIES OF PLANS Sat, 7 Apr 2007 10:22:45 -0600
  • Re: COPIES OF PLANS Sat, 7 Apr 2007 12:04:08 -0600
  • Re: Converting PLT files or AutoCad output to TIFF format Sat, 14 Apr 2007 13:42:43 -0600
  • Re: Converting PLT files or AutoCad output to TIFF format Sat, 14 Apr 2007 17:09:07 -0600
  • Re: SHOOTINGS Tue, 17 Apr 2007 07:18:19 -0600
  • bay bridge Tue, 1 May 2007 22:19:39 -0600
  • Re: bay bridge Wed, 2 May 2007 09:40:27 -0600
  • Re: bay bridge Wed, 2 May 2007 10:08:30 -0600
  • Re: Problem with SE Reference Sat, 16 Jun 2007 14:58:22 -0600
  • 2006 IBC Seismic Map CD Thu, 28 Jun 2007 12:02:13 -0600
  • Re: 2006 IBC Seismic Map CD Thu, 28 Jun 2007 13:10:25 -0600

• Sanjay Verma
  • How do I put my question in this forum Thu, 7 Jun 2007 18:55:12 -0600
  • Mitigation / Acceptance of Concrete Mix with Reactive Aggregates Fri, 8 Jun 2007 09:40:42 -0600

• Scott Maxwell
  • Re: Alternate design method Tue, 1 May 2007 17:39:20 -0600
  • "Certifying" Lifting Plates Tue, 1 May 2007 17:43:00 -0600
  • Re: "Certifying" Lifting Plates Wed, 2 May 2007 00:39:08 -0600
  • Re: Alternate design method Wed, 2 May 2007 00:58:40 -0600
  • Re: Alternate design method Wed, 2 May 2007 07:42:23 -0600
  • Re: bay bridge Wed, 2 May 2007 09:58:11 -0600
  • Re: bay bridge Wed, 2 May 2007 10:54:33 -0600
  • Re: Alternate Design Method Wed, 2 May 2007 14:16:18 -0600
  • Re: Alternate Design Method Wed, 2 May 2007 14:20:09 -0600
  • Cost of codes (was RE: ASCE 7-05 Wind Load and Publication Costs) Thu, 10 May 2007 23:59:46 -0600
  • Re: ASCE 7-05 Wind Load and Publication Costs Fri, 11 May 2007 00:15:02 -0600
  • Re: Cost of codes (was RE: ASCE 7-05 Wind Load and Publication Costs) Fri, 11 May 2007 08:43:12 -0600
  • RE: Cost of codes (was RE: ASCE 7-05 Wind Load and Publication Costs) Fri, 11 May 2007 08:54:11 -0600
  • Re: costs of code, revisions, clarifications, seminars, programs and insurance Fri, 11 May 2007 20:06:49 -0600
  • Re: What do call your EITs? Mon, 14 May 2007 09:41:57 -0600
  • Re: What do call your EITs? Mon, 14 May 2007 13:34:58 -0600
  • Re: What do call your EITs? Mon, 14 May 2007 14:40:02 -0600
  • RE: Traprock Finish Tue, 15 May 2007 07:58:32 -0600
  • Re: High lift grouting Fri, 25 May 2007 13:45:52 -0600
  • RE: 9-11 Wackos Sat, 26 May 2007 13:32:40 -0600
  • Looking for engineer in Louisiana Mon, 28 May 2007 18:10:14 -0600
  • Re: Roof panel safety factors Wed, 30 May 2007 23:17:10 -0600
  • Re: Code Costs, Redux Mon, 4 Jun 2007 05:53:04 -0600
  • Re: Washington State - SEIII Exam Mon, 4 Jun 2007 08:46:54 -0600
  • Re: Stair landing pans and rebar cover Tue, 5 Jun 2007 16:56:03 -0600
  • Re: Concrete Masonry Walls Tue, 5 Jun 2007 17:05:52 -0600
  • Re: masonry control joints Tue, 5 Jun 2007 17:11:37 -0600
  • RE: Concrete Masonry Walls Wed, 6 Jun 2007 09:09:28 -0600
  • Re: ASCE 7-05 Errors Thu, 7 Jun 2007 00:01:54 -0600
  • Re: ASCE 7-05 Errors Thu, 7 Jun 2007 06:02:10 -0600
  • RE: ASCE 7-05 Errors Thu, 7 Jun 2007 06:12:58 -0600
  • RE: ASCE 7-05 Errors Thu, 7 Jun 2007 07:53:07 -0600
  • Re: Code errata Fri, 8 Jun 2007 12:21:04 -0600
  • Re: Sole plate nailing Thu, 14 Jun 2007 12:46:08 -0600
  • Re: Cracking Moment Thu, 14 Jun 2007 15:29:18 -0600
  • RE: Cracking Moment Thu, 14 Jun 2007 16:42:44 -0600
  • Re: Sole plate nailing Thu, 14 Jun 2007 18:46:16 -0600
  • Re: 42 was Re: Cracking Moment Thu, 14 Jun 2007 18:49:36 -0600
  • RE: Question regarding Cracking Moment Fri, 15 Jun 2007 08:12:48 -0600
  • Re: ASCE 7-05 Errors Sun, 17 Jun 2007 08:29:07 -0600
  • RE: ASCE 7-05 Errors Sun, 17 Jun 2007 19:31:49 -0600
  • RE: ASCE 7-05 Errors Sun, 17 Jun 2007 19:45:32 -0600
  • RE: ASCE 7-05 Errors Sun, 17 Jun 2007 20:08:14 -0600
  • RE: ASCE 7-05 Errors Mon, 18 Jun 2007 08:07:54 -0600
  • Re: ASCE 7-05 Errors Mon, 18 Jun 2007 08:30:41 -0600
  • RE: ASCE 7-05 Errors Tue, 19 Jun 2007 21:30:41 -0600
  • RE: ASCE 7-05 Errors Tue, 19 Jun 2007 21:43:13 -0600
  • Re: ICC / ICBO Reports Fri, 22 Jun 2007 21:26:57 -0600
  • RE: ASCE 7-05 Errors Wed, 27 Jun 2007 11:52:06 -0600
  • Re: REVIT Thu, 28 Jun 2007 14:32:01 -0600

• Scott, William N
  • RE: Horizontal reinforcing in IBC foundation walls Wed, 11 Apr 2007 10:58:48 -0600
  • RE: metal lattice Fri, 11 May 2007 13:02:51 -0600
  • RE: Beveled Washers for MC Channels Thu, 17 May 2007 02:17:57 -0600
  • RE: Aluminum Lag Bolts Mon, 25 Jun 2007 11:50:34 -0600

• SE3949
  • SCBF Compressible Material? Thu, 10 May 2007 10:59:02 -0600

• seaint04
  • RE: Traprock Finish Tue, 15 May 2007 07:36:01 -0600
  • Tilt-Up Wall Pier Design Tue, 15 May 2007 13:06:59 -0600
  • Mechanical Room Explosion Resistant Construction Mon, 11 Jun 2007 18:53:08 -0600

• Sean Martin
  • Using Dynamic Load Information Wed, 6 Jun 2007 06:18:35 -0600

• Sherman, James J. (Jim)
  • RE: ASCE 7-05 Errors Thu, 7 Jun 2007 05:47:12 -0600

• Smith, Edgar
  • RE: fillet welding Fri, 1 Jun 2007 14:10:50 -0600

• sscholl2(--nospam--at)juno.com
  • Re: Lumber Species in Phoenix Mon, 2 Apr 2007 12:48:14 -0600

• Stan Caldwell
  • Virginia Tech Shootings Hit Civil Engineering Department Hard Wed, 18 Apr 2007 19:59:37 -0600

• Stan E Scholl
  • Re: Stone house Sat, 7 Apr 2007 12:35:33 -0600
  • Re: Using steel chains as concrete reinforcement?? Fri, 27 Apr 2007 10:54:24 -0600
  • Re: bay bridge Wed, 2 May 2007 00:25:50 -0600
  • Re: super flat floors Fri, 8 Jun 2007 12:24:03 -0600

• Steiner, Matthew
  • Gun Control Listserve Wed, 25 Apr 2007 10:35:37 -0600

• StructuralReview
  • California SE Review Workshops in SF & LA Mon, 2 Apr 2007 13:35:25 -0600
  • California SE Review Workshops in SF & LA Mon, 23 Apr 2007 08:17:07 -0600
  • Last Reminder! California SE Review Workshops in SF & LA Mon, 7 May 2007 13:23:49 -0600

• Stuart, Matthew
  • Curved Wood Beam Tue, 10 Apr 2007 10:51:56 -0600
  • RE: Traprock Finish Tue, 15 May 2007 05:18:40 -0600
  • Concrete PH question Fri, 25 May 2007 09:31:02 -0600
  • RE: Concrete PH question Fri, 25 May 2007 10:22:23 -0600
  • Lateral Resistance for Structured Pile Supported Foundation Wed, 30 May 2007 05:34:43 -0600
  • RE: super flat floors Fri, 8 Jun 2007 12:27:07 -0600
  • RE: Mechanical Room Explosion Resistant Construction Tue, 12 Jun 2007 07:02:24 -0600
  • RE: Floating Slab for Residence Fri, 15 Jun 2007 06:43:38 -0600
  • RE: ASCE 7-05 Errors Mon, 18 Jun 2007 08:50:50 -0600

• sutej
  • Re: Plywood over light gage shear wall Thu, 24 May 2007 12:54:28 -0600

• Tarek Mokhtar
  • Re: Cantilevered Retaining Walls on Pile Foundation Sun, 15 Apr 2007 17:51:01 -0600
  • Glass railing Wed, 6 Jun 2007 19:47:17 -0600
  • Re: Glass railing Thu, 7 Jun 2007 09:18:45 -0600

• TBerair
  • Steel Member Check for Seismic Loading Thu, 3 May 2007 07:17:27 -0600
  • RE: Rationale for Sprinklers on Trucks... Mon, 7 May 2007 03:05:36 -0600
  • ASCE 7-05 Wind Load - Simplified Methods by S.K. Ghosh in GoStructural.com Wed, 9 May 2007 01:19:00 -0600
  • RE: California Amendments to the 2006 IBC Fri, 11 May 2007 01:26:46 -0600
  • RE: Braced Wall vs Shear Wall Tue, 12 Jun 2007 07:43:05 -0600
  • RE: Aluminum Lag Bolts Tue, 26 Jun 2007 08:41:15 -0600
  • RE: ASCE 7-05 Errors Wed, 27 Jun 2007 01:27:12 -0600

• Theodore Smith
  • Lag bolt removal and reinstallation Tue, 19 Jun 2007 16:14:47 -0600

• Thor Tandy
  • Re: Converting PLT files or AutoCad output to TIFF format Sat, 14 Apr 2007 16:40:33 -0600
  • RE: Concrete Masonry Walls Wed, 6 Jun 2007 09:03:53 -0600
  • RE: Glass railing Wed, 6 Jun 2007 21:57:58 -0600
  • RE: AISI 12L14 Steel Sat, 9 Jun 2007 09:59:36 -0600
  • RISA Results Thu, 14 Jun 2007 12:15:42 -0600
  • RE: RISA Results Thu, 14 Jun 2007 12:54:40 -0600
  • RE: Dumb Question Fri, 15 Jun 2007 10:33:02 -0600
  • Dumb Question Fri, 15 Jun 2007 10:36:23 -0600
  • RE: Dumb Question Fri, 15 Jun 2007 13:57:35 -0600
  • RE: Dumb Question Sat, 16 Jun 2007 11:06:05 -0600
  • RE: REVIT or (ArchiCad) Thu, 28 Jun 2007 11:14:39 -0600

• TJ Fu
  • Re: Lateral Resistance for Structured Pile Supported Foundation Wed, 30 May 2007 13:50:29 -0600
  • File with xmcd extension Tue, 5 Jun 2007 12:06:37 -0600

• Tom . Hunt
  • Career opportunity with the City of Santa Monica Building & Safety Mon, 9 Apr 2007 10:19:55 -0600
  • RE: Site Specific Analysis Sds and Sd1 values Thu, 12 Apr 2007 17:08:09 -0600
  • RE: Site Specific Analysis Sds and Sd1 values Thu, 12 Apr 2007 17:26:34 -0600
  • Re: Site Specific Analysis Sds and Sd1 values Thu, 12 Apr 2007 17:46:44 -0600
  • RE: Let the floodgates open (was: SHOOTINGS) Mon, 30 Apr 2007 09:36:36 -0600
  • Re: "Certifying" Lifting Plates Tue, 1 May 2007 17:56:05 -0600
  • Re: Galvanized Steel Tube Column Wed, 2 May 2007 07:58:45 -0600
  • RE: "Certifying" Lifting Plates Wed, 2 May 2007 09:21:55 -0600
  • Steel Member Check for Seismic Loading Thu, 3 May 2007 08:03:09 -0600
  • RE: why the moment frame must be capable to resist at least 25% of lateral loadsØŸ Thu, 3 May 2007 11:24:50 -0600
  • RE: Rationale for Sprinklers on Trucks... Thu, 3 May 2007 12:11:17 -0600
  • Re: Japanese Steel Shapes vs British Steel Shapes Tue, 8 May 2007 09:44:15 -0600
  • ASCE 7-05 Wind Load - Simplified Methods by S.K. Ghosh in GoStructural.com Wed, 9 May 2007 07:21:52 -0600
  • RE: California Amendments to the 2006 IBC Thu, 10 May 2007 12:50:18 -0600
  • Castellated Beam Tables Tue, 15 May 2007 15:31:15 -0600
  • Re: Alternate Cold Joint Location Tue, 22 May 2007 15:55:21 -0600
  • Re: Sulphur Pit Roof Emergency Thu, 24 May 2007 08:54:41 -0600
  • Re: Large Bay 'X' Bracing Tue, 29 May 2007 17:22:00 -0600
  • Re: Gas Turbine Short-Circuit Foundation Design Factor of Safety / Guidelines Thu, 31 May 2007 11:44:26 -0600
  • RE: Code Costs, Redux Tue, 5 Jun 2007 12:04:16 -0600
  • Re: Lag bolt removal and reinstallation Wed, 20 Jun 2007 08:25:42 -0600
  • RE: ASCE 7-05 Errors Tue, 26 Jun 2007 13:31:40 -0600

• Tom Murray
  • steel -vibration analysis Sun, 17 Jun 2007 11:47:26 -0600

• Tom Skaggs
  • RE: California SB 1175 & AB 127 Fri, 13 Apr 2007 11:53:49 -0600
  • RE: Frank Woeste, SE PhD - on Virgina Tech Campus where student opens fire this morning. Mon, 16 Apr 2007 14:12:28 -0600
  • RE: Plywood over light gage shear wall Wed, 23 May 2007 12:36:59 -0600
  • RE: Plywood over light gage shear wall Wed, 23 May 2007 13:38:52 -0600
  • wood design software vs. other design software Thu, 21 Jun 2007 10:54:55 -0600

• Trib K Mittra
  • Career opportunity with the City of Santa Monica Building & Safety Mon, 23 Apr 2007 08:44:25 -0600
  • Simplified base shear formula in 97 UBC Mon, 23 Apr 2007 08:49:18 -0600
  • RE: Let the floodgates open (was: SHOOTINGS) Fri, 27 Apr 2007 15:57:00 -0600
  • ASCE 7-05 Wind Load - Simplified Methods by S.K. Ghosh in GoStructural.com Wed, 9 May 2007 12:21:20 -0600
  • Steel Member Check for Seismic Loading Wed, 16 May 2007 11:00:52 -0600
  • RE: ASCE 7-05 Errors Tue, 26 Jun 2007 14:25:16 -0600
  • RE: Aluminum Lag Bolts Tue, 26 Jun 2007 14:30:22 -0600

• Truitt Vance
  • RE: roof truss daiphragm forces Thu, 17 May 2007 18:41:55 -0600
  • RE: Cripple wall stud length Fri, 1 Jun 2007 10:51:23 -0600
  • RE: Opinions on "Multiframe" Mon, 18 Jun 2007 14:55:02 -0600
  • electronic signature Fri, 22 Jun 2007 08:59:23 -0600
  • RE: electronic signature Fri, 22 Jun 2007 10:26:47 -0600
  • RE: electronic signature Fri, 22 Jun 2007 11:08:36 -0600

• TTB
  • test Thu, 17 May 2007 11:15:15 -0600

• Vineet Aggarwal
  • Re: Sulphur Pit Roof Emergency Fri, 25 May 2007 05:06:03 -0600

• Wendy Allen
  • FW: ICC ES Memo Information From Simpson Strongtie Wed, 11 Apr 2007 12:47:26 -0600

• Wesley Werner
  • Bar Joist Fri, 6 Apr 2007 07:30:26 -0600
  • RE: SHOOTINGS Tue, 24 Apr 2007 16:18:53 -0600
  • RE: Floating Slab for Residence Fri, 15 Jun 2007 09:02:12 -0600
  • RE: Maps of earthquake accelerations Wed, 20 Jun 2007 14:36:18 -0600

• Will Blanchard
  • RE: What do call your EITs? Mon, 14 May 2007 14:55:37 -0600
  • Hollowcore Slab Diaphragm Connection Detailing Mon, 14 May 2007 16:51:59 -0600

• Will Haynes
  • Re: Placing concrete walls on footings before 7 days Fri, 18 May 2007 09:51:10 -0600
  • Re: 9-11 Wackos Fri, 25 May 2007 19:56:26 -0600
  • Re: steel - vibration analysis Fri, 1 Jun 2007 07:56:22 -0600
  • Re: strengthening of floor joists with FRP's?? Sat, 2 Jun 2007 05:13:32 -0600
  • Re: strengthening of floor joists with FRP's?? Sat, 2 Jun 2007 10:24:46 -0600
  • Re: strengthening of floor joists with FRP's?? Sat, 2 Jun 2007 10:44:10 -0600
  • Re: strengthening of floor joists with FRP's?? Mon, 4 Jun 2007 17:27:40 -0600
  • Re: How do I put my question in this forum Thu, 7 Jun 2007 19:00:19 -0600

• William King
  • RE: Braced Wall vs Shear Wall Mon, 11 Jun 2007 11:25:20 -0600
  • RE: LL on roof with solar panels. Fri, 15 Jun 2007 10:54:14 -0600

• William.Sherman
  • RE: Question regarding Cracking Moment Fri, 15 Jun 2007 07:28:00 -0600
  • RE: dead end slab control joint Sun, 17 Jun 2007 08:32:18 -0600
  • RE: ASCE 7-05 Errors Sun, 17 Jun 2007 08:52:22 -0600
  • RE: ASCE 7-05 Errors Sun, 17 Jun 2007 09:00:38 -0600

• Wontae Kim
  • ACI318-05: Minimum Reinforcements Mon, 7 May 2007 14:43:13 -0600
  • Does Anybody Have "Analysis of Collector/Drag Elements in Rigid Diaphragm"? Mon, 11 Jun 2007 11:30:27 -0600

• Yi Yang
  • EnerCalc - Retaining Wall Design Wed, 20 Jun 2007 10:55:54 -0600
  • Structural Aluminum Design Software Wed, 20 Jun 2007 10:56:11 -0600
  • RE: EnerCalc - Retaining Wall Design Thu, 21 Jun 2007 08:57:26 -0600

• Zabala, Milo
  • Problem with SE Reference Fri, 15 Jun 2007 17:45:54 -0600

---

Mail converted by MHonArc