SEAINT

 

INTRO

 

SEARCH
ARCHIVE

 

NEED
A BOOK?

 

2010
Jan-Mar
Apr-Jun
Jul-Sep

 

2009
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2008
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2007
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2006
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2005
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2004
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2003
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2002
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2001
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

2000
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

1999
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

1998
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

1997
Jan-Jun
Jul-Sep
Oct-Dec

1996
Jan-Jun
Jul-Dec

 

1995
Jul-Dec

 

HOME

Some recommendations...
 
 

 
 

---

SEAINT Mail Archive 2007 (Oct-Dec)

Civil and Structural Engineering discussions by author

www.seaintarchive.org

• About this archive / Index
• Messages sorted by: [Thread] [Subject] [Date]

Site Search: Need a book? Civil and Structural Engineering book recommendations...
 

---

Messages: 1389

• Alfred Müller
  • AW: Best Wishes Sun, 23 Dec 2007 04:14:58 -0700

• 남윤호
  • Elongation of ASTM A496 Mon, 3 Dec 2007 12:44:24 -0700

• A. J. Young
  • Try to archive SEAINT mail at Google Groups Wed, 24 Oct 2007 20:58:12 -0600
  • RE: Pre-Engr. Mtl Bldg. W/ Tilt-up Wall Wed, 24 Oct 2007 22:27:02 -0600
  • Re: Try to archive SEAINT mail at Google Groups Wed, 24 Oct 2007 23:37:10 -0600

• Abolhassan Astaneh-Asl
  • Announcement of a Seminar on Blast Protection of Bridges Mon, 1 Oct 2007 02:59:53 -0600
  • Seminar on Blast Protection of Bridges Mon, 1 Oct 2007 20:48:19 -0600
  • Invitation to Dr. Charles H. Thornton's Seminar on UC Campus-Oct 8-2007, 1:00-2:00 Sibley Aud. Fri, 5 Oct 2007 08:28:38 -0600
  • AISC Table X (9th Ed.) or Table 10-9a (13th Ed.) Sun, 7 Oct 2007 23:37:44 -0600
  • Steel Plate Shear Walls Wed, 24 Oct 2007 23:02:23 -0600
  • ASCE and its New Orleans Levees Failure Investigation Fri, 14 Dec 2007 11:27:41 -0700
  • Santa Monica Seminar Sun, 16 Dec 2007 05:21:20 -0700

• Acharya, Suresh
  • Tool for calculation of Sesimic Design Categoty (SDC) per 2006 IB C / ASCE7-05 Thu, 25 Oct 2007 13:20:30 -0600
  • RE: Tool for calculation of Sesimic Design Categoty (SDC) per 200 6 IBC / ASCE7-05 Mon, 29 Oct 2007 12:50:54 -0600
  • RE: UBC Wind Uplift on Fabric Shade Cover Wed, 31 Oct 2007 12:38:32 -0600
  • RE: Mathcad Fri, 2 Nov 2007 09:43:09 -0600
  • RE: Mathcad Fri, 2 Nov 2007 12:13:10 -0600
  • RE: Mathcad - Converting Excel to Mathcad: Best Practices Fri, 2 Nov 2007 17:17:41 -0600
  • RE: Self-straining Force Tue, 6 Nov 2007 14:47:01 -0700
  • RE: California Building Code and the 2006 IBC Tue, 6 Nov 2007 16:26:22 -0700
  • RE: MATHCAD: Anyone Else Not Getting the Warm 'n' Fuzzies from PT C? Thu, 8 Nov 2007 18:28:22 -0700
  • RE: MATHCAD: Anyone Else Not Getting the Warm 'n' Fuzzies from PT C? Thu, 8 Nov 2007 18:41:14 -0700
  • RE: Alternate Braced Walls and SDC D Mon, 10 Dec 2007 10:20:44 -0700
  • RE: ASCE7-05 redundancy factor and wall design for Out-of-plane f orces Thu, 13 Dec 2007 12:40:35 -0700

• Adam Vakiener
  • RE: paid for release of CAD files to subs... Tue, 23 Oct 2007 05:35:20 -0600
  • Re: CBC 2007 Wind Load Fri, 21 Dec 2007 13:50:05 -0700

• Adjebli
  • Re: Expansive Foundation Fri, 12 Oct 2007 16:35:55 -0600
  • Re: Expansive Foundation Fri, 12 Oct 2007 20:06:47 -0600
  • Re: CO Snow Loads Sat, 3 Nov 2007 13:52:27 -0600

• Ahkam Syahril
  • Ahkam Syahril is out of the office. Fri, 12 Oct 2007 03:02:30 -0600

• Alden Manipula
  • snow drift and adjacent buildings Thu, 8 Nov 2007 14:36:20 -0700
  • RE: snow drift and adjacent buildings Fri, 9 Nov 2007 09:04:23 -0700
  • RE: snow drift and adjacent buildings Mon, 12 Nov 2007 08:24:56 -0700
  • ASCE7 Question Wed, 19 Dec 2007 14:02:59 -0700

• Alex C. Nacionales
  • Re: 8" Columns Fri, 5 Oct 2007 17:25:03 -0600
  • Re: 8" Columns Fri, 5 Oct 2007 17:39:25 -0600
  • Re: 8" Columns Sat, 6 Oct 2007 11:09:34 -0600
  • Re: Interior Door Forces Sun, 7 Oct 2007 22:48:55 -0600
  • Re: Interior Door Forces Mon, 8 Oct 2007 08:03:59 -0600
  • Re: 3D model with metal deck diaphragm Tue, 9 Oct 2007 19:10:29 -0600
  • Re: Mathcad Thu, 1 Nov 2007 20:42:29 -0600

• Alexander Bausk
  • Re: Steel Shapes Booklet Thu, 11 Oct 2007 10:37:47 -0600
  • Re: Steel Shape Availability Thu, 18 Oct 2007 14:17:48 -0600
  • Re: Hand Lettering Font for Windows programs and for CAD programs that use True-Type fonts. Mon, 22 Oct 2007 08:39:33 -0600
  • Re: Hand Lettering Font for Windows programs and for CAD programs that use True-Type fonts. Mon, 22 Oct 2007 09:26:45 -0600
  • Re: Frost Line Wed, 24 Oct 2007 11:06:25 -0600
  • Re: Frost Line Wed, 24 Oct 2007 11:25:51 -0600
  • Re: Frost Line Wed, 24 Oct 2007 11:33:40 -0600
  • Re: Mathcad vs. Matlab Thu, 1 Nov 2007 13:16:16 -0600
  • Re: Structural Engineering Spreadsheets Fri, 2 Nov 2007 12:27:44 -0600
  • Re: Structural Engineering Spreadsheets Mon, 5 Nov 2007 11:34:43 -0700
  • Re: Structural Engineering Spreadsheets Tue, 6 Nov 2007 07:01:56 -0700

• alfred mueller
  • AW: Choice between intermittent and continuous fillet weld in Crane girder ( I beam with channel top) Tue, 9 Oct 2007 01:17:32 -0600
  • Hot Rolled Vs Cold formed steel properties Sat, 27 Oct 2007 03:00:49 -0600
  • AW: cold form steel truss fire damage Thu, 1 Nov 2007 09:25:37 -0600
  • AW: footings look too big Sat, 3 Nov 2007 05:32:14 -0600
  • AW: footings look too big Sun, 4 Nov 2007 10:28:08 -0700
  • AW: AW: footings look too big Mon, 5 Nov 2007 01:24:52 -0700
  • AW: question my authority???! Mon, 5 Nov 2007 06:56:29 -0700
  • WG: footings look too big Tue, 6 Nov 2007 00:31:43 -0700
  • AW: Openings in concrete beams Sat, 8 Dec 2007 02:01:42 -0700
  • AW: Boring through GLBs Sun, 9 Dec 2007 13:11:43 -0700

• Andre Sidler
  • Structural Engineering Spreadsheets Fri, 2 Nov 2007 08:01:36 -0600
  • California Building Code and the 2006 IBC Tue, 6 Nov 2007 15:24:36 -0700

• Andrew Kester, P.E.
  • MFR home foundations Wed, 10 Oct 2007 16:25:37 -0600
  • re: steel flitch plate Wed, 17 Oct 2007 13:16:03 -0600
  • wind uplift + lateral loads Wed, 24 Oct 2007 10:17:30 -0600
  • printers/ wood software Wed, 31 Oct 2007 10:49:26 -0600
  • alternative energy - non-political but off topic Fri, 2 Nov 2007 12:40:37 -0600
  • RE: Transfer force of large tie beam Mon, 12 Nov 2007 12:45:08 -0700
  • re: sustainable companies Mon, 12 Nov 2007 13:10:25 -0700
  • re: sustainable companies Tue, 13 Nov 2007 11:20:23 -0700
  • re: straw bale homes Fri, 16 Nov 2007 16:04:10 -0700
  • RE: wide flange beam to jst girder Wed, 28 Nov 2007 09:53:53 -0700
  • re: HSS welds & HSS in general Fri, 30 Nov 2007 13:36:24 -0700
  • re: waterproofing, etc Fri, 30 Nov 2007 13:51:02 -0700
  • re: variable pitch connectors Wed, 5 Dec 2007 06:24:46 -0700
  • Basic Roof Diaph. Question Mon, 17 Dec 2007 15:25:49 -0700

• Andrew Kester, PE
  • re: tilt-up + PEMB Tue, 2 Oct 2007 10:15:51 -0600
  • question my authority???! Sat, 3 Nov 2007 11:44:55 -0600
  • re: straw bale homes Mon, 19 Nov 2007 09:31:07 -0700
  • horizontal roof bracing 2 Tue, 18 Dec 2007 11:28:20 -0700

• Andy Heigley
  • IBC Conventional Light Framed Construction Wed, 17 Oct 2007 08:45:01 -0600
  • RE: IBC Conventional Light Framed Construction Wed, 17 Oct 2007 11:29:00 -0600
  • RE: Conventional Light Framed Construction Vs. Engineered Building Mon, 22 Oct 2007 06:07:25 -0600

• arshad vali
  • Re: Stresscore Tue, 2 Oct 2007 16:35:44 -0600

• ASC
  • INTERMITTENT VS CONTINUOUS WELDS Tue, 9 Oct 2007 02:29:41 -0600
  • FAILURE Mon, 5 Nov 2007 01:33:03 -0700
  • BLACK BOX SUPPORTED STRUCTURE Sat, 24 Nov 2007 15:36:38 -0700
  • AVAILABILITY OF DISTANCE LEARNING COURSES Mon, 17 Dec 2007 03:49:30 -0700
  • HIGH SEISMIC LOADS Mon, 31 Dec 2007 15:24:32 -0700

• Ashraf Manjappara
  • Re: Wind tower design Tue, 20 Nov 2007 02:10:42 -0700

• ASLCSE
  • Re: Steel Shapes Booklet Thu, 11 Oct 2007 10:16:35 -0600
  • Re: DESIGN PROGRAMS FOR NEW CODE Fri, 16 Nov 2007 16:38:31 -0700
  • Re: Structural Engineering Spreadsheets Fri, 16 Nov 2007 16:46:08 -0700
  • Re: California Building Code and the 2006 IBC Fri, 16 Nov 2007 17:04:43 -0700
  • Re: EnerCalc 6 Wed, 5 Dec 2007 19:36:26 -0700
  • Re: Staggered Plywood roof sheathing Wed, 5 Dec 2007 19:37:15 -0700
  • Re: ENERCALC 6 Wed, 5 Dec 2007 19:49:15 -0700
  • Re: Architects! Wed, 12 Dec 2007 10:37:18 -0700
  • Re: Santa Monica Seminar Thu, 20 Dec 2007 11:02:29 -0700

• AWC Info
  • Strenth and Stiffness of 1x diagonal floor sheathing?? Wed, 3 Oct 2007 13:11:34 -0600
  • AVAILABILITY OF DISTANCE LEARNING COURSES Thu, 20 Dec 2007 07:09:08 -0700
  • timber pedestrian bridge Fri, 21 Dec 2007 06:40:16 -0700

• bart
  • Re: concrete drop panels Tue, 9 Oct 2007 13:00:32 -0600
  • Re: concrete drop panels Tue, 9 Oct 2007 14:18:43 -0600
  • Re: Both face should have Shrinkage Steel in 12 inch thick Structural Slab (ACI318) Thu, 11 Oct 2007 14:52:43 -0600

• Ben Yousefi
  • RE: AISC Seismic Provisions Tue, 30 Oct 2007 17:02:28 -0600
  • Free 2007 CBC code seminars including the LA regional amendments Fri, 9 Nov 2007 15:15:26 -0700
  • RE: Free 2007 CBC code seminars including the LA regional amendments Mon, 12 Nov 2007 09:28:08 -0700
  • RE: Fire Rated Assembly Consultants >> One Hour Floor / Ceiling Assembly UL - G525 & G531 Thu, 15 Nov 2007 12:20:11 -0700
  • Concrete seminar in southern California Wed, 28 Nov 2007 16:48:57 -0700
  • RE: Santa Monica Seminar Tue, 18 Dec 2007 13:38:01 -0700

• bill
  • SEISMIC: Seismic Factors for Qatar Mon, 1 Oct 2007 14:34:15 -0600
  • Re: SEISMIC: Seismic Factors for Qatar Mon, 1 Oct 2007 14:56:03 -0600
  • Re: Expansive Foundation Wed, 17 Oct 2007 07:53:28 -0600

• Bill Allen
  • Strenth and Stiffness of 1x diagonal floor sheathing?? Tue, 2 Oct 2007 21:13:48 -0600
  • RE: Strenth and Stiffness of 1x diagonal floor sheathing?? Wed, 3 Oct 2007 06:55:44 -0600
  • RE: Strenth and Stiffness of 1x diagonal floor sheathing?? Wed, 3 Oct 2007 17:21:47 -0600
  • UBC 1630.8.2.2.1.7 Bracing Load Wed, 3 Oct 2007 18:37:16 -0600
  • RE: UBC 1630.8.2.2.1.7 Bracing Load Thu, 4 Oct 2007 12:06:23 -0600
  • AISC Table X (9th Ed.) or Table 10-9a (13th Ed.) Fri, 5 Oct 2007 13:14:12 -0600
  • RE: AISC Table X (9th Ed.) or Table 10-9a (13th Ed.) Mon, 8 Oct 2007 09:24:17 -0600
  • RE: Wood column with steel flitch plate Tue, 16 Oct 2007 08:13:01 -0600
  • RE: paid for release of CAD files to subs... Tue, 23 Oct 2007 07:48:48 -0600
  • RE: paid for release of CAD files to subs... Tue, 23 Oct 2007 09:21:05 -0600
  • RE: TEDDS Software Tue, 23 Oct 2007 12:33:14 -0600
  • RE: I am unavailable to respond to your email. If you need immediate assistance or would like Tue, 23 Oct 2007 15:12:00 -0600
  • RE: Tool for calculation of Sesimic Design Categoty (SDC) per 2006 IBC / ASCE7-05 Mon, 29 Oct 2007 13:17:53 -0600
  • RE: 64 bit computers systems Mon, 29 Oct 2007 15:37:20 -0600
  • RE: DESIGN PROGRAMS FOR NEW CODE Tue, 30 Oct 2007 10:59:34 -0600
  • RE: 12 x 18 printers Tue, 30 Oct 2007 18:18:11 -0600
  • UBC Wind Uplift on Fabric Shade Cover Wed, 31 Oct 2007 12:26:01 -0600
  • RE: biofuels and further offfffff-topic Thu, 1 Nov 2007 14:40:39 -0600
  • RE: Earthquake-Proof Design Fri, 2 Nov 2007 11:15:15 -0600
  • RE: Earthquake-Proof Design Fri, 2 Nov 2007 11:56:19 -0600
  • RE: footings look too big Fri, 2 Nov 2007 18:47:30 -0600
  • RE: footings look too big Sat, 3 Nov 2007 12:36:51 -0600
  • RE: alternative energy - non-political but off topic Sun, 4 Nov 2007 20:42:19 -0700
  • RE: Revit Structural Thu, 15 Nov 2007 12:40:13 -0700
  • RE: Revit Structural Thu, 15 Nov 2007 13:47:43 -0700
  • RE: QUESTION REGARDING GLB REINFORCING? Thu, 15 Nov 2007 14:37:16 -0700
  • Wind Uplift on Footings Tue, 20 Nov 2007 13:57:43 -0700
  • RE: Wind Uplift on Footings Tue, 20 Nov 2007 18:05:07 -0700
  • RE: Wind Uplift on Footings Tue, 20 Nov 2007 19:38:08 -0700
  • RE: Wind Uplift on Footings Wed, 21 Nov 2007 14:30:47 -0700
  • Offer to the SEAINT List Sun, 25 Nov 2007 10:13:10 -0700
  • RE: Cantilevered Retaining Wall - Rule of Thumb Mon, 26 Nov 2007 10:08:18 -0700
  • RE: Cantilevered Retaining Wall - Rule of Thumb Tue, 27 Nov 2007 08:18:35 -0700
  • RE: I may have made a huge mistake... Tue, 27 Nov 2007 15:19:52 -0700
  • RE: I may have made a huge mistake... Tue, 27 Nov 2007 17:05:11 -0700
  • RE: underground house Thu, 29 Nov 2007 15:59:02 -0700
  • RE: Great ASCE7 spreadsheet Tue, 4 Dec 2007 20:32:23 -0700
  • RE: Great ASCE7 spreadsheet Wed, 5 Dec 2007 08:05:16 -0700
  • RE: Perforated shear walls Thu, 6 Dec 2007 17:36:52 -0700
  • RE: Perforated shear walls Thu, 6 Dec 2007 18:10:54 -0700
  • RE: Great ASCE7 spreadsheet / ComboBoxes Fri, 7 Dec 2007 08:50:33 -0700
  • RE: Great ASCE7 spreadsheet / ComboBoxes Fri, 7 Dec 2007 10:42:46 -0700
  • RE: Great ASCE7 spreadsheet / ComboBoxes Tue, 11 Dec 2007 09:13:16 -0700
  • RE: Stair stringer design for continuous kinked stringer Tue, 11 Dec 2007 09:13:27 -0700
  • Architects! Wed, 12 Dec 2007 08:04:11 -0700
  • RE: Profis Software Wed, 12 Dec 2007 09:35:08 -0700
  • RE: Is there a better way (2x4 SW Anchor Bolts to comply with ACI 318-05 Appendix D)? Wed, 12 Dec 2007 16:27:32 -0700
  • RE: Removing yourself as EOR Wed, 12 Dec 2007 20:39:42 -0700
  • RE: New and hopefully useful web site Thu, 13 Dec 2007 16:06:01 -0700
  • RE: Tilt-Up Wall Submittal Review Fri, 14 Dec 2007 08:45:17 -0700
  • RE: New and hopefully useful web site Fri, 14 Dec 2007 12:19:00 -0700
  • Design of Pavement Section Thu, 20 Dec 2007 14:28:14 -0700
  • RE: Design of Pavement Section Thu, 20 Dec 2007 14:48:12 -0700
  • RE: Design of Pavement Section Fri, 21 Dec 2007 08:19:08 -0700
  • RE: Procedures Thu, 27 Dec 2007 17:56:33 -0700
  • Small Job on the Westside (I think it's Beverly Hills, but I'm not sure) Mon, 31 Dec 2007 16:58:14 -0700

• Bill Lehmer
  • Re: Live and Dead Load Spreadsheet Sat, 8 Dec 2007 07:32:41 -0700

• Bill Polhemus
  • [Fwd: VisualAnalysis 6.0 FREE Training Sessions] Tue, 16 Oct 2007 15:48:13 -0600
  • CAD: AutoCAD Revit Structure Suite 2008 Tue, 16 Oct 2007 15:51:39 -0600
  • Re: 64 bit computers systems Mon, 29 Oct 2007 12:58:57 -0600
  • Re: 64 bit computers systems Mon, 29 Oct 2007 15:59:49 -0600
  • Re: 64 bit computers systems Mon, 29 Oct 2007 16:05:19 -0600
  • Re: 64 bit computers systems Mon, 29 Oct 2007 16:20:50 -0600
  • Re: 64 bit computers systems Mon, 29 Oct 2007 18:31:05 -0600
  • Re: 64 bit computers systems Mon, 29 Oct 2007 21:21:38 -0600
  • Re: DESIGN PROGRAMS FOR NEW CODE Tue, 30 Oct 2007 12:36:55 -0600
  • Re: 64 bit computers systems Tue, 30 Oct 2007 17:44:18 -0600
  • Re: Is ASCE desperate for cash flow? Wed, 31 Oct 2007 21:47:08 -0600
  • Re: Is ASCE desperate for cash flow? Wed, 31 Oct 2007 21:49:40 -0600
  • Re: Is ASCE desperate for cash flow? Wed, 31 Oct 2007 21:52:13 -0600
  • Re: Bill Polhemus, that was a cheap shot Thu, 1 Nov 2007 05:17:16 -0600
  • CODE: Wind Loading at Lower Wind Speeds? Thu, 1 Nov 2007 10:52:54 -0600
  • Re: Bill Polhemus, that was a cheap shot Thu, 1 Nov 2007 11:33:44 -0600
  • Re: Biofuels Thu, 1 Nov 2007 11:56:34 -0600
  • Re: Bill Polhemus, that was a cheap shot Thu, 1 Nov 2007 13:24:50 -0600
  • Re: biofuels and further offfffff-topic Thu, 1 Nov 2007 14:32:06 -0600
  • Re: biofuels and further off-topic Thu, 1 Nov 2007 14:36:35 -0600
  • Re: footings look too big Sun, 4 Nov 2007 05:35:09 -0700
  • Re: Metal Beam Guard Railing Section -Queation Sun, 4 Nov 2007 20:15:35 -0700
  • Re: alternative energy - non-political but off topic Sun, 4 Nov 2007 20:16:11 -0700
  • Re: Structural Failure Sun, 4 Nov 2007 20:16:49 -0700
  • MATHCAD: Anyone Else Not Getting the Warm 'n' Fuzzies from PTC? Sun, 4 Nov 2007 20:17:30 -0700
  • Re: question my authority???! Mon, 5 Nov 2007 19:30:26 -0700
  • Re: question my authority???! Getting way OT Tue, 6 Nov 2007 12:31:24 -0700
  • Re: MATHCAD: Anyone Else Not Getting the Warm 'n' Fuzzies from PTC? Wed, 7 Nov 2007 20:03:47 -0700
  • Re: MATHCAD: Anyone Else Not Getting the Warm 'n' Fuzzies from PTC? Thu, 8 Nov 2007 18:00:33 -0700
  • Re: MATHCAD: Anyone Else Not Getting the Warm 'n' Fuzzies from PT C? Thu, 8 Nov 2007 18:33:57 -0700
  • Re: Sustainable companies Sun, 11 Nov 2007 06:33:29 -0700
  • Re: Sustainable companies Sun, 11 Nov 2007 06:34:18 -0700
  • Re: Sustainable companies Sun, 11 Nov 2007 11:45:55 -0700
  • Re: Sustainable companies Sun, 11 Nov 2007 11:48:12 -0700
  • Re: Sustainable companies Mon, 12 Nov 2007 05:38:51 -0700
  • Re: Sustainable companies Mon, 12 Nov 2007 05:39:35 -0700
  • Re: sustainable companies Mon, 12 Nov 2007 20:11:44 -0700
  • Re: Sustainable companies Mon, 12 Nov 2007 20:12:24 -0700
  • Re: USGS Web address for determining IBC SDC and Base Shear Wed, 14 Nov 2007 04:45:51 -0700
  • Re: Circa 80's Walmart construction Wed, 14 Nov 2007 04:48:00 -0700
  • Re: Transfer force of large tie beam Wed, 14 Nov 2007 04:51:21 -0700
  • Re: Revit Structural Thu, 15 Nov 2007 14:16:03 -0700
  • Re: Revit Structural Sat, 17 Nov 2007 22:54:27 -0700
  • Re: Revit Structural Sun, 18 Nov 2007 17:07:17 -0700
  • Re: Expansion Joint in Tunnel Tue, 20 Nov 2007 06:45:21 -0700
  • Re: 64 bit computers systems Tue, 20 Nov 2007 18:06:30 -0700
  • Re: Embarrassingly dumb question Tue, 20 Nov 2007 20:07:52 -0700
  • Re: ASCE 7-05 Wind Tue, 20 Nov 2007 20:10:58 -0700
  • MODELING: Accounting for a 'Black Box' Supported Structure Fri, 23 Nov 2007 12:40:03 -0700
  • Re: Prestressing strands 1958... Sun, 2 Dec 2007 22:26:08 -0700
  • Re: Off Topic: Wimax in Bangalore Sun, 30 Dec 2007 07:32:24 -0700

• Bob Freeman
  • metal siding Wed, 3 Oct 2007 19:05:51 -0600
  • Mfr home foundations Wed, 10 Oct 2007 17:46:30 -0600
  • biofuels and further off-topic Thu, 1 Nov 2007 12:41:29 -0600
  • biofuels and off-topic Thu, 1 Nov 2007 16:14:10 -0600
  • earthquake-resistant design Fri, 2 Nov 2007 11:07:49 -0600
  • waterproofing retaining wall at the beach and scouring Tue, 6 Nov 2007 10:01:50 -0700
  • waterproofing Tue, 6 Nov 2007 12:03:14 -0700
  • Fiber reinforced slab Thu, 8 Nov 2007 11:34:23 -0700

• bpce
  • Re: EnerCalc 6 Wed, 19 Dec 2007 07:15:22 -0700

• Brad Connelly
  • Re: CA & WA SE reciprocity Mon, 26 Nov 2007 12:18:14 -0700

• Brian K. Smith
  • RE: Pre-Engr. Mtl Bldg. W/ Tilt-up Wall Mon, 1 Oct 2007 11:12:40 -0600
  • RE: TEDDS Software Mon, 22 Oct 2007 14:06:46 -0600
  • RE: TEDDS Software Mon, 22 Oct 2007 14:37:27 -0600
  • RE: ASCE 7-05 Tue, 23 Oct 2007 09:47:02 -0600
  • RE: TEDDS Software Tue, 23 Oct 2007 11:17:40 -0600
  • RE: TEDDS Software Tue, 23 Oct 2007 12:32:31 -0600
  • RE: TEDDS Software Tue, 23 Oct 2007 13:39:46 -0600
  • Indiana Engineer Wed, 24 Oct 2007 09:28:50 -0600
  • RE: Indiana Engineer Wed, 24 Oct 2007 09:39:21 -0600
  • RE: wind uplift + lateral loads Wed, 24 Oct 2007 10:34:21 -0600
  • RE: Wind drift Fri, 2 Nov 2007 08:13:43 -0600

• Brian S Bossley
  • California PE/SE References Thu, 25 Oct 2007 10:48:40 -0600
  • RE: California PE/SE References Sat, 27 Oct 2007 19:28:08 -0600

• Brijbhushan J. Gupta
  • Stability of highrise buildings for seismic loads Sun, 30 Dec 2007 09:29:22 -0700

• Casey K. Hemmatyar
  • RE: S1 and Ss by address (handy-dandy link) Thu, 4 Oct 2007 12:33:48 -0600
  • RE: Tool for calculation of Sesimic Design Categoty (SDC) per 2006 IBC / ASCE7-05 Thu, 25 Oct 2007 15:20:03 -0600
  • RE: IBC06 / CBC07 Stone veneer on metal studs Mon, 29 Oct 2007 11:17:31 -0600
  • RE: Wind drift Thu, 1 Nov 2007 17:50:05 -0600
  • RE: Inexperienced engineers (was Structural Engineering Spreadsheets) Tue, 6 Nov 2007 10:16:53 -0700
  • RE: Equivallent Frame Method for RC shear walls Mon, 12 Nov 2007 09:39:27 -0700
  • RE: Slide Rule Era (Cofar metal decking ) Wed, 14 Nov 2007 16:16:56 -0700
  • RE: Openings in concrete beams Fri, 7 Dec 2007 13:24:02 -0700
  • RE: New and hopefully useful web site Thu, 13 Dec 2007 11:48:44 -0700
  • RE: Santa Monica Seminar Tue, 18 Dec 2007 15:44:03 -0700

• Charles R. Ashley Jr.
  • RE: Steel Shape Availability Fri, 19 Oct 2007 15:38:28 -0600
  • RE: ASCE 7-05 Tue, 23 Oct 2007 09:16:13 -0600
  • RE: Wind drift Wed, 7 Nov 2007 09:09:20 -0700

• Chris Slater
  • New and hopefully useful web site Wed, 12 Dec 2007 12:09:18 -0700
  • Re: New and hopefully useful web site Thu, 13 Dec 2007 10:20:22 -0700
  • RE: New and hopefully useful web site Fri, 14 Dec 2007 07:38:11 -0700
  • Contec AAC Fri, 28 Dec 2007 10:33:45 -0700

• Christopher Banbury
  • RE: Live Load for residential home gym Thu, 11 Oct 2007 11:21:24 -0600
  • RE: Hand Lettering Font for Windows programs and for CAD programs that use True-Type fonts. Mon, 22 Oct 2007 09:10:04 -0600
  • cold form steel truss fire damage Mon, 29 Oct 2007 13:59:32 -0600
  • RE: Structural Engineering Spreadsheets Fri, 2 Nov 2007 08:45:59 -0600
  • RE: OT- Scanners Fri, 2 Nov 2007 13:33:58 -0600
  • RE: Structural Engineering Spreadsheets Mon, 5 Nov 2007 08:32:33 -0700
  • RE: Fiber Reinforced slab Thu, 8 Nov 2007 11:13:23 -0700
  • RE: ASCE 7-05 Wind (Regular & Orthogonal) Mon, 26 Nov 2007 08:26:30 -0700
  • underground house Thu, 29 Nov 2007 07:54:24 -0700
  • threaded rod couplers Thu, 29 Nov 2007 09:53:47 -0700
  • RE: Profis Software Wed, 12 Dec 2007 08:40:23 -0700
  • RE: Tilt-Up Wall Submittal Review Fri, 14 Dec 2007 09:26:20 -0700
  • jailbreak through CMU Tue, 18 Dec 2007 09:01:36 -0700
  • RE: jailbreak through CMU Tue, 18 Dec 2007 11:43:16 -0700
  • timber pedestrian bridge Thu, 20 Dec 2007 15:18:20 -0700

• Christopher Wright
  • Re: Choice between intermittent and continuous fillet weld in Crane girder ( I beam with channel top) Mon, 8 Oct 2007 12:30:24 -0600
  • Re: Choice between intermittent and continuous fillet weld in Crane girder ( I beam with channel top) Mon, 8 Oct 2007 12:32:15 -0600
  • Re: ASCE 7-05 Sat, 20 Oct 2007 10:19:25 -0600
  • Re: ASCE 7-05 Mon, 22 Oct 2007 09:01:01 -0600
  • Re: Conventional Light Framed Construction Vs. Engineered Building [Another View] Mon, 22 Oct 2007 09:49:35 -0600
  • Re: ASCE 7-05 Tue, 23 Oct 2007 10:30:04 -0600
  • Re: Is ASCE desperate for cash flow? Wed, 31 Oct 2007 16:12:29 -0600
  • Re: Is ASCE desperate for cash flow? Wed, 31 Oct 2007 16:28:25 -0600
  • Re: Job in the UAE Thu, 1 Nov 2007 09:56:45 -0600
  • Re: Biofuels Thu, 1 Nov 2007 10:26:49 -0600
  • Re: footings look too big Sun, 4 Nov 2007 09:14:40 -0700
  • Re: A3 Laser printers Sun, 4 Nov 2007 16:51:29 -0700
  • Re: AW: footings look too big Sun, 4 Nov 2007 18:48:41 -0700
  • Re: alternative energy - non-political but off topic Sun, 4 Nov 2007 20:28:46 -0700
  • Re: MATHCAD: Anyone Else Not Getting the Warm 'n' Fuzzies from PTC? Wed, 7 Nov 2007 20:32:10 -0700
  • Re: MATHCAD: Anyone Else Not Getting the Warm 'n' Fuzzies from PTC? Wed, 7 Nov 2007 22:43:32 -0700
  • Re: lifting preassemble structures Thu, 8 Nov 2007 09:39:23 -0700
  • Re: Sustainable companies Fri, 9 Nov 2007 21:35:04 -0700
  • Re: MATHCAD: Anyone Else Not Getting the Warm 'n' Fuzzies from PTC? Sun, 11 Nov 2007 22:03:07 -0700
  • Re: Revit Structural Thu, 15 Nov 2007 12:54:28 -0700
  • Re: Cantilevered Retaining Wall - Rule of Thumb Mon, 26 Nov 2007 21:38:31 -0700
  • Re: Cantilevered Retaining Wall - Rule of Thumb Mon, 26 Nov 2007 22:18:16 -0700
  • Re: Cantilevered Retaining Wall - Rule of Thumb Mon, 26 Nov 2007 23:57:02 -0700
  • Re: Cantilevered Retaining Wall - Rule of Thumb Tue, 27 Nov 2007 12:54:32 -0700
  • Re: Shamefully Off-Topic: Carbon Christmas Fri, 14 Dec 2007 11:42:56 -0700
  • Re: HIGH SEISMIC LOADS Mon, 31 Dec 2007 22:32:28 -0700

• Chuck Utzman
  • Re: Strenth and Stiffness of 1x diagonal floor sheathing?? Tue, 2 Oct 2007 23:49:17 -0600
  • Re: Expansive Foundation Fri, 12 Oct 2007 16:35:07 -0600
  • Re: Expansive Foundation Fri, 12 Oct 2007 19:19:19 -0600
  • Re: Conventional Light Framed Construction Vs. Engineered Building [Another View] Mon, 22 Oct 2007 11:04:39 -0600
  • Re: water proof Tue, 6 Nov 2007 09:47:14 -0700
  • Re: Strap and Tie-Down Systems Part 2 by Alfred Commins Thu, 22 Nov 2007 11:28:18 -0700
  • Re: underground house [gettin' pretty OT now] Thu, 29 Nov 2007 16:38:03 -0700
  • Re: underground house Fri, 30 Nov 2007 11:37:31 -0700
  • Re: underground house Sun, 2 Dec 2007 21:36:50 -0700
  • Re: Perforated shear walls Thu, 6 Dec 2007 19:04:31 -0700
  • Re: Perforated shear walls Fri, 7 Dec 2007 11:19:44 -0700
  • Re: Perforated shear walls Fri, 7 Dec 2007 16:36:26 -0700
  • Re: Removing yourself as EOR Wed, 12 Dec 2007 12:01:26 -0700
  • Re: IBC Code Enforcement Mon, 17 Dec 2007 10:44:39 -0700
  • Re: EnerCalc 6 Tue, 18 Dec 2007 22:15:15 -0700

• Conrad Harrison
  • RE: UBC 1630.8.2.2.1.7 Bracing Load Wed, 3 Oct 2007 18:47:50 -0600
  • RE: Radiused angle ledger Thu, 4 Oct 2007 18:37:47 -0600
  • RE: Subject: Re: sustainable companies Sun, 18 Nov 2007 17:57:08 -0700
  • RE: Hay and Straw, was Re: sustainable companies Mon, 19 Nov 2007 17:58:59 -0700
  • RE: Wind tower design Wed, 21 Nov 2007 21:20:08 -0700
  • RE: Wind tower design Sun, 25 Nov 2007 20:38:31 -0700
  • RE: Cantilevered Retaining Wall - Rule of Thumb Mon, 26 Nov 2007 21:51:27 -0700
  • RE: Cantilevered Retaining Wall - Rule of Thumb Mon, 26 Nov 2007 23:43:27 -0700
  • RE: weld symbols Thu, 29 Nov 2007 20:16:47 -0700
  • RE: Great ASCE7 spreadsheet Tue, 4 Dec 2007 19:59:59 -0700
  • RE: Sloped Rafter Bearing Tue, 4 Dec 2007 20:51:53 -0700
  • RE: Great ASCE7 spreadsheet / ComboBoxes Thu, 6 Dec 2007 21:13:40 -0700
  • RE: Great ASCE7 spreadsheet / ComboBoxes Sun, 9 Dec 2007 17:48:57 -0700
  • RE: Stair stringer design for continuous kinked stringer Mon, 10 Dec 2007 21:57:35 -0700
  • RE: Connections between timber batterns/purlins with concrete slab Mon, 10 Dec 2007 22:48:58 -0700
  • RE: AVAILABILITY OF DISTANCE LEARNING COURSES Mon, 17 Dec 2007 18:07:22 -0700
  • RE: Basic Roof Diaph. Question Mon, 17 Dec 2007 19:42:35 -0700
  • RE: CBC 2007 Wind Load Tue, 18 Dec 2007 18:33:30 -0700
  • RE: jailbreak through CMU Tue, 18 Dec 2007 19:34:54 -0700
  • RE: AVAILABILITY OF DISTANCE LEARNING COURSES Wed, 19 Dec 2007 21:58:34 -0700

• Cummings, Thomas J.
  • RE: Shamefully Off-Topic: Carbon Christmas Fri, 14 Dec 2007 11:25:34 -0700
  • Holiday wishes Fri, 14 Dec 2007 11:33:06 -0700

• DA
  • DESIGN PROGRAMS FOR NEW CODE Tue, 30 Oct 2007 10:41:18 -0600
  • Re: USGS Web address for determining IBC SDC and Base Shear Tue, 13 Nov 2007 21:56:28 -0700

• DA ENGINEERING
  • water proof Mon, 5 Nov 2007 14:52:55 -0700
  • Re: waterproofing retaining wall at the beach and scouring Tue, 6 Nov 2007 11:20:08 -0700
  • wind load calc's progrm Mon, 24 Dec 2007 10:51:14 -0700
  • Re: 2008 Los Angeles Building Code Wed, 26 Dec 2007 16:47:27 -0700

• Daniel Popp
  • Re: 8" Columns Sat, 6 Oct 2007 02:30:28 -0600
  • Re: ADAPT or POSTEN ?? Fri, 16 Nov 2007 18:27:30 -0700
  • Re: Post-tensioned or reinforced ? Fri, 16 Nov 2007 22:29:27 -0700

• Daryl Richardson
  • Re: Frost Line Wed, 24 Oct 2007 17:31:59 -0600
  • Re: 12 x 18 printers Wed, 31 Oct 2007 10:42:27 -0600
  • Re: Bill Polhemus, that was a cheap shot Thu, 1 Nov 2007 09:50:09 -0600
  • Re: Cantilevered Retaining Wall - Rule of Thumb Mon, 5 Nov 2007 10:06:05 -0700
  • Re: Frost footings - whats the big deal? Mon, 5 Nov 2007 17:35:45 -0700
  • Re: Frost footings - whats the big deal? Wed, 7 Nov 2007 18:07:22 -0700
  • Re: straw bale homes Mon, 19 Nov 2007 11:01:44 -0700
  • Re: Wind tower design Mon, 19 Nov 2007 11:54:02 -0700
  • Re: Wind tower design Mon, 19 Nov 2007 11:58:25 -0700
  • Re: Expansion Joint in Tunnel Tue, 20 Nov 2007 10:13:33 -0700
  • Re: Responsiblity for local conditions Wed, 21 Nov 2007 18:27:55 -0700
  • Re: Cantilevered Retaining Wall - Rule of Thumb Tue, 27 Nov 2007 11:53:36 -0700
  • Re: Uplift on Roof Sheathing - "Pull Through" Resistance Wed, 12 Dec 2007 10:47:25 -0700
  • Re: Removing yourself as EOR Wed, 12 Dec 2007 11:36:04 -0700
  • Re: jailbreak through CMU Tue, 18 Dec 2007 19:22:18 -0700
  • Best Wishes Sat, 22 Dec 2007 12:10:50 -0700
  • Re: Procedures Fri, 28 Dec 2007 11:39:38 -0700
  • Re: Contec AAC Fri, 28 Dec 2007 11:56:56 -0700

• Dave Adams
  • Design Examples Wed, 26 Dec 2007 09:53:07 -0700
  • Fundamental period of tanks Thu, 27 Dec 2007 13:05:33 -0700
  • RE: Fundamental period of tanks Thu, 27 Dec 2007 16:34:37 -0700
  • RE: Fundamental period of tanks Fri, 28 Dec 2007 10:12:40 -0700

• David Fisher
  • RE: 8" Columns Fri, 5 Oct 2007 11:24:00 -0600
  • RE: MFR home foundations Wed, 10 Oct 2007 16:38:25 -0600
  • paid for release of CAD files to subs... Mon, 22 Oct 2007 12:29:51 -0600
  • RE: I am unavailable to respond to your email. If you need immediate assistance or would like Tue, 23 Oct 2007 15:51:59 -0600
  • RE: Indiana Engineer Wed, 24 Oct 2007 09:31:48 -0600
  • slabs on grade... Mon, 29 Oct 2007 09:47:04 -0600
  • RE: Is ASCE desperate for cash flow? Wed, 31 Oct 2007 16:20:25 -0600
  • RE: Bill Polhemus, that was a cheap shot Thu, 1 Nov 2007 12:36:22 -0600
  • RE: Bill Polhemus, that was a cheap shot Thu, 1 Nov 2007 13:39:23 -0600
  • RE: Bill Polhemus, that was a cheap shot Fri, 2 Nov 2007 08:25:56 -0600
  • RE: question my authority???! Mon, 5 Nov 2007 09:36:34 -0700
  • RE: Frost footings - whats the big deal? Mon, 5 Nov 2007 10:03:00 -0700
  • RE: Structural Engineering Spreadsheets - new Excel Version with XLSX! - thanks Microsoft Tue, 6 Nov 2007 13:24:29 -0700
  • RE: Revit Structural Thu, 15 Nov 2007 09:38:04 -0700
  • RE: I may have made a huge mistake... Tue, 27 Nov 2007 13:16:30 -0700
  • Prestressing strands 1958... Fri, 30 Nov 2007 14:16:37 -0700
  • RE: Architects! Wed, 12 Dec 2007 08:47:32 -0700
  • RE: Removing yourself as EOR Wed, 12 Dec 2007 12:03:54 -0700
  • RE: Architects! Thu, 13 Dec 2007 13:09:38 -0700
  • FW: Purdue University Co-Op Days Gift Donations Tue, 18 Dec 2007 09:28:04 -0700

• David Merrick
  • Steel Plate Shear Walls Tue, 23 Oct 2007 13:15:18 -0600
  • RE: Structural Engineering Spreadsheets Tue, 6 Nov 2007 14:42:38 -0700
  • virus found in SE files Sat, 10 Nov 2007 06:59:25 -0700

• David Topete
  • RE: SEISMIC: Seismic Factors for Qatar Mon, 1 Oct 2007 14:58:05 -0600
  • RE: UBC 1630.8.2.2.1.7 Bracing Load Wed, 3 Oct 2007 19:01:19 -0600
  • RE: Foundations for a 3-pinned arch stadium Tue, 9 Oct 2007 10:27:11 -0600
  • Live Load for residential home gym Wed, 10 Oct 2007 17:05:18 -0600
  • RE: Live Load for residential home gym Thu, 11 Oct 2007 10:35:36 -0600
  • RE: Is ASCE desperate for cash flow? Thu, 1 Nov 2007 09:01:22 -0600
  • RE: biofuels and further off-topic Thu, 1 Nov 2007 15:13:13 -0600
  • RE: biofuels and further off-topic Thu, 1 Nov 2007 15:48:26 -0600
  • RE: footings look too big Fri, 2 Nov 2007 17:39:29 -0600
  • RE: footings look too big Fri, 2 Nov 2007 17:55:22 -0600
  • RE: question my authority???! Mon, 5 Nov 2007 14:23:53 -0700
  • RE: Los Angeles City 2007 building codes. Wed, 7 Nov 2007 12:34:56 -0700
  • Hilti powder-actu fasteners Fri, 9 Nov 2007 11:07:26 -0700
  • RE: Hilti powder-actu fasteners Fri, 9 Nov 2007 11:42:30 -0700
  • Re: sustainable companies Mon, 12 Nov 2007 13:56:36 -0700
  • Re: USGS Web address for determining IBC SDC and Base Shear Wed, 14 Nov 2007 09:36:43 -0700
  • Re: 2006 IBC WIND ANALYSIS Question Mon, 19 Nov 2007 09:42:57 -0700
  • Re: Responsiblity for local conditions Wed, 21 Nov 2007 09:44:55 -0700
  • Re: R value UBC97 Thu, 29 Nov 2007 14:58:56 -0700
  • Re: ENERCALC 6 Tue, 4 Dec 2007 09:24:54 -0700
  • Re: Staggered Plywood roof sheathing Wed, 5 Dec 2007 16:56:08 -0700
  • welded wire fabric for columns Mon, 10 Dec 2007 16:31:58 -0700
  • Re: welded wire fabric for columns Tue, 11 Dec 2007 09:54:21 -0700
  • Re: welded wire fabric for columns Tue, 11 Dec 2007 14:48:59 -0700
  • Re: CBC 2007 Wind Load Fri, 21 Dec 2007 14:02:14 -0700

• Dennis Wish
  • Light Framing Wood - Room Addition Lateral question Thu, 11 Oct 2007 22:29:52 -0600
  • Autocad Bold Chisel Hand Lettering Font Sat, 13 Oct 2007 18:09:11 -0600
  • RE: Light Framing Wood - Room Addition Lateral question Sat, 13 Oct 2007 18:35:10 -0600
  • Hand Lettering Font for Windows programs and for CAD programs that use True-Type fonts. Sat, 20 Oct 2007 18:17:32 -0600
  • Is ASCE desperate for cash flow? Wed, 31 Oct 2007 15:15:03 -0600

• Dmitri Wright
  • RE: Great ASCE7 spreadsheet Wed, 5 Dec 2007 07:41:04 -0700
  • RE:Basic Roof Diaph. Question Tue, 18 Dec 2007 07:34:13 -0700
  • Re: CBC 2007 Wind Load Wed, 19 Dec 2007 10:15:15 -0700
  • Snow drift Wed, 19 Dec 2007 10:31:15 -0700

• domdean
  • Re: Revit Structural Thu, 15 Nov 2007 13:44:29 -0700

• Donald Bruckman
  • RE: CAD: AutoCAD Revit Structure Suite 2008 Wed, 17 Oct 2007 11:30:25 -0600
  • RE: [SPAM] paid for release of CAD files to subs... Mon, 22 Oct 2007 15:01:30 -0600
  • Earthquake-Proof Design Fri, 2 Nov 2007 09:52:35 -0600
  • RE: Earthquake-Proof Design Fri, 2 Nov 2007 10:39:35 -0600
  • RE: Earthquake-Proof Design Fri, 2 Nov 2007 11:25:28 -0600
  • RE: Earthquake-Proof Design Fri, 2 Nov 2007 14:01:31 -0600
  • RE: Earthquake-Proof Design Fri, 2 Nov 2007 14:30:55 -0600
  • RE: footings look too big Fri, 2 Nov 2007 18:23:17 -0600
  • RE: footings look too big Fri, 2 Nov 2007 18:57:47 -0600
  • RE: footings look too big Sun, 4 Nov 2007 16:24:50 -0700
  • RE: question my authority???! Sun, 4 Nov 2007 16:58:27 -0700
  • RE: California Building Code and the 2006 IBC Tue, 6 Nov 2007 15:33:25 -0700
  • RE: MATHCAD: Anyone Else Not Getting the Warm 'n' Fuzzies from PTC? Fri, 9 Nov 2007 09:23:33 -0700
  • RE: Hilti powder-actu fasteners Sat, 10 Nov 2007 10:25:23 -0700
  • RE: Transfer force of large tie beam Tue, 13 Nov 2007 10:07:03 -0700
  • RE: gypsum suspended ceiling detail Tue, 13 Nov 2007 16:26:26 -0700
  • RE: Adding Storefront to Existing CMU Wall Wed, 14 Nov 2007 09:36:54 -0700
  • RE: QUESTION REGARDING GLB REINFORCING? Fri, 16 Nov 2007 12:10:04 -0700
  • RE: Strap and Tie-Down Systems Part 2 by Alfred Commins Thu, 22 Nov 2007 10:51:05 -0700
  • RE: Strap and Tie-Down Systems Part 2 by Alfred Commins Thu, 22 Nov 2007 11:55:06 -0700
  • RE: I may have made a huge mistake... Wed, 28 Nov 2007 09:45:19 -0700
  • RE: underground house Fri, 30 Nov 2007 16:07:41 -0700
  • Boring through GLBs Sat, 8 Dec 2007 10:02:07 -0700
  • RE: Architects! Wed, 12 Dec 2007 09:36:10 -0700
  • RE: Uplift on Roof Sheathing - "Pull Through" Resistance Wed, 12 Dec 2007 11:32:55 -0700
  • RE: Procedures Thu, 27 Dec 2007 17:02:29 -0700

• Doug Mayer
  • RE: Live Load for residential home gym Wed, 10 Oct 2007 17:40:00 -0600
  • RE: ASCE 7-05 Tue, 23 Oct 2007 13:46:59 -0600
  • ASCE 7-05 Wind Tue, 20 Nov 2007 19:42:25 -0700
  • Another Wind Question Tue, 27 Nov 2007 12:38:09 -0700
  • RE: weld symbols Thu, 29 Nov 2007 11:54:50 -0700
  • Sloped Rafter Bearing Tue, 4 Dec 2007 10:24:04 -0700
  • RE: Sloped Rafter Bearing Tue, 4 Dec 2007 10:35:33 -0700
  • RE: Sloped Rafter Bearing Tue, 4 Dec 2007 18:08:53 -0700
  • RE: Sloped Rafter Bearing Tue, 4 Dec 2007 20:33:19 -0700
  • RE: Perforated shear walls Thu, 6 Dec 2007 17:23:46 -0700
  • RE: Perforated shear walls Thu, 6 Dec 2007 17:56:42 -0700
  • RE: Perforated shear walls Thu, 6 Dec 2007 18:19:51 -0700
  • RE: Great ASCE7 spreadsheet / ComboBoxes Fri, 7 Dec 2007 10:37:12 -0700

• Douglas Boyd
  • RE: Structural Engineering Spreadsheets - new Excel Version with XLSX! Tue, 6 Nov 2007 09:43:00 -0700

• Drew Morris
  • metal siding screwed to steel Wed, 3 Oct 2007 18:36:34 -0600
  • Re: ASCE 7-05 Tue, 23 Oct 2007 14:02:11 -0600
  • Re: Is ASCE desperate for cash flow? Wed, 31 Oct 2007 15:52:59 -0600
  • Re: biofuels and further off-topic Thu, 1 Nov 2007 14:17:51 -0600
  • Re: Wind drift Thu, 1 Nov 2007 16:58:41 -0600
  • Re: footings look too big Sat, 3 Nov 2007 15:02:46 -0600
  • Re: question my authority???! Mon, 5 Nov 2007 13:38:06 -0700
  • Re: Structural Engineering Spreadsheets Tue, 6 Nov 2007 11:58:51 -0700
  • Re: sustainable companies Tue, 13 Nov 2007 11:15:22 -0700
  • Cofar metal decking Tue, 13 Nov 2007 16:01:33 -0700
  • Re: Wind Uplift on Footings Wed, 21 Nov 2007 14:56:37 -0700
  • Re: Cantilevered Retaining Wall - Rule of Thumb Tue, 27 Nov 2007 12:25:32 -0700
  • Re: Snow drift Tue, 18 Dec 2007 13:06:08 -0700

• DRPFLY
  • Re: UBC Wind Uplift on Fabric Shade Cover Wed, 31 Oct 2007 13:05:37 -0600

• ECVAl3
  • Re: Light Framing Wood - Room Addition Lateral question Sat, 13 Oct 2007 09:33:42 -0600
  • Re: CODE: Wind Loading at Lower Wind Speeds? Fri, 2 Nov 2007 11:22:30 -0600
  • Re: footings look too big Sat, 3 Nov 2007 12:31:39 -0600

• Ed Najjarine, SE
  • RE: UBC 1630.8.2.2.1.7 Bracing Load Thu, 4 Oct 2007 01:56:58 -0600
  • 2006 IBC WIND ANALYSIS Question Fri, 16 Nov 2007 13:27:18 -0700
  • RE: 2006 IBC WIND ANALYSIS Question Sat, 17 Nov 2007 15:34:08 -0700

• Ehrlich, Gary
  • RE: Strenth and Stiffness of 1x diagonal floor sheathing?? Wed, 3 Oct 2007 06:53:36 -0600
  • RE: IBC Conventional Light Framed Construction Wed, 17 Oct 2007 09:16:26 -0600
  • RE: IBC Conventional Light Framed Construction Wed, 17 Oct 2007 11:53:07 -0600
  • RE: Frost Line Thu, 25 Oct 2007 11:13:20 -0600
  • RE: ASCE 7-05 Thu, 25 Oct 2007 11:20:39 -0600
  • RE: ASCE 7-05 Thu, 25 Oct 2007 11:22:42 -0600
  • RE: ASCE 7-05 Thu, 25 Oct 2007 11:23:00 -0600
  • RE: IBC06 / CBC07 Stone veneer on metal studs Fri, 26 Oct 2007 09:08:04 -0600
  • RE: Alternate Braced Walls and SDC D Tue, 18 Dec 2007 06:55:10 -0700

• ENGRLAINES
  • Interior Door Forces Sun, 7 Oct 2007 00:41:27 -0600

• Eric Tompos
  • CO Snow Loads Sat, 3 Nov 2007 12:46:56 -0600
  • Uplift on Footings: Superior Foundation Walls Wed, 21 Nov 2007 07:06:35 -0700

• erik gibbs
  • Re: DESIGN PROGRAMS FOR NEW CODE Thu, 1 Nov 2007 20:34:42 -0600
  • Sustainable companies Fri, 9 Nov 2007 20:36:50 -0700
  • Re: Sustainable companies Sun, 11 Nov 2007 11:11:45 -0700
  • Re: Sustainable companies Sun, 11 Nov 2007 18:21:52 -0700
  • Re: Sustainable companies Mon, 12 Nov 2007 13:34:04 -0700
  • Re: sustainable companies Mon, 12 Nov 2007 13:36:16 -0700
  • Re: sustainable companies Mon, 12 Nov 2007 14:17:37 -0700
  • New IBC Structural Notes Fri, 16 Nov 2007 14:09:34 -0700
  • New IBC conversion and Structural notes Mon, 19 Nov 2007 13:24:13 -0700
  • Re: ENERCALC 6 Mon, 3 Dec 2007 21:33:08 -0700

• Freeman C. Tang
  • Is there a better way (2x4 SW Anchor Bolts to comply with ACI 318-05 Appendix D)? Wed, 12 Dec 2007 12:43:33 -0700
  • Re: Is there a better way (2x4 SW Anchor Bolts to comply with ACI 318-05 Appe... Wed, 12 Dec 2007 14:35:09 -0700
  • Wood Framed 2x4 SW Anchor Bolts to comply with ACI 318-05 Appendix D Requirements ? Wed, 12 Dec 2007 23:19:20 -0700

• Freeman Tang
  • RE: ASCE 7-05 Tue, 23 Oct 2007 13:20:57 -0600
  • FW: ASCE 7-05 Tue, 23 Oct 2007 14:10:57 -0600
  • RE: ASCE 7-05 Tue, 23 Oct 2007 14:39:17 -0600
  • RE: Is there a better way (2x4 SW Anchor Bolts to comply with ACI 318-05 Appendix D)? Wed, 12 Dec 2007 13:28:02 -0700
  • RE: Is there a better way (2x4 SW Anchor Bolts to comply with ACI 318-05 Appendix D)? Wed, 12 Dec 2007 13:52:17 -0700
  • RE: Is there a better way (2x4 SW Anchor Bolts to comply with ACI 318-05 Appendix D)? Wed, 12 Dec 2007 17:20:54 -0700

• FSRahbar
  • Re: 12 x 18 printers Tue, 30 Oct 2007 12:16:13 -0600

• G Vishwanath
  • Re: Choice between intermittent and continuous fillet weld in Crane girder ( I beam with channel top) Tue, 9 Oct 2007 02:21:47 -0600
  • DSTV and Peddimat Thu, 18 Oct 2007 07:55:46 -0600
  • Re: footings look too big Mon, 5 Nov 2007 23:58:50 -0700
  • Off Topic: Wimax in Bangalore Sat, 29 Dec 2007 01:25:02 -0700

• Gaines, David
  • Openings in concrete beams Fri, 7 Dec 2007 12:57:52 -0700
  • RE: Uplift on Roof Sheathing - "Pull Through" Resistance Wed, 12 Dec 2007 10:29:10 -0700
  • RE: Is there a better way (2x4 SW Anchor Bolts to comply with ACI 318-05 Appendix D)? Wed, 12 Dec 2007 13:14:54 -0700
  • RE: New and hopefully useful web site Fri, 14 Dec 2007 11:24:18 -0700

• Garner, Robert
  • RE: Choice between intermittent and continuous fillet weld in Crane girder ( I beam with channel top) Mon, 8 Oct 2007 11:33:37 -0600
  • RE: Expansive Foundation Tue, 16 Oct 2007 15:26:44 -0600
  • RE: ASCE 7-05 Fri, 19 Oct 2007 11:55:21 -0600
  • RE: Hand Lettering Font for Windows programs and for CAD programs that use True-Type fonts. Mon, 22 Oct 2007 08:26:24 -0600
  • RE: ASCE 7-05 Mon, 22 Oct 2007 08:28:10 -0600
  • TEDDS Software Mon, 22 Oct 2007 13:54:27 -0600
  • RE: I am unavailable to respond to your email. If you need immediate assistance or would like Tue, 23 Oct 2007 15:39:25 -0600
  • RE: Frost Line Wed, 24 Oct 2007 11:15:24 -0600
  • RE: Structural Engineering Spreadsheets Mon, 5 Nov 2007 08:10:22 -0700
  • RE: Cantilevered Retaining Wall - Rule of Thumb Mon, 5 Nov 2007 10:52:33 -0700
  • RE: USGS Web address for determining IBC SDC and Base Shear Wed, 14 Nov 2007 07:53:16 -0700
  • RE: Revit Structural Thu, 15 Nov 2007 14:23:01 -0700
  • RE: Wind Uplift on Footings Tue, 20 Nov 2007 14:31:02 -0700
  • RE: CA & WA SE reciprocity Mon, 26 Nov 2007 08:24:59 -0700
  • RE: I may have made a huge mistake... Tue, 27 Nov 2007 14:31:22 -0700
  • RE: underground house Fri, 30 Nov 2007 11:52:39 -0700
  • RE: Removing yourself as EOR Wed, 12 Dec 2007 11:44:44 -0700
  • RE: New and hopefully useful web site Wed, 12 Dec 2007 12:22:05 -0700
  • RE: Shamefully Off-Topic: Carbon Christmas Fri, 14 Dec 2007 11:51:42 -0700
  • RE: jailbreak through CMU Tue, 18 Dec 2007 09:29:38 -0700

• Gary L. Hodgson and Assoc.
  • Re: Radiused angle ledger Fri, 5 Oct 2007 05:49:36 -0600
  • Re: Foundations for a 3-pinned arch stadium Tue, 9 Oct 2007 05:43:00 -0600
  • Re: Choice between intermittent and continuous fillet weld in Crane girder ( I beam with channel top) Tue, 9 Oct 2007 06:03:43 -0600
  • Re: MFR home foundations Fri, 12 Oct 2007 05:40:30 -0600
  • Re: MFR home foundations Sat, 13 Oct 2007 06:35:42 -0600
  • Re: Wood column with steel flitch plate Tue, 16 Oct 2007 05:56:59 -0600
  • Re: ASCE 7-05 Sat, 20 Oct 2007 07:24:26 -0600
  • Re: ASCE 7-05 Mon, 22 Oct 2007 06:03:34 -0600
  • Re: Conventional Light Framed Construction Vs. Engineered Building [Another View] Tue, 23 Oct 2007 05:43:30 -0600
  • Re: paid for release of CAD files to subs... Tue, 23 Oct 2007 05:46:36 -0600
  • Re: TEDDS Software Tue, 23 Oct 2007 05:53:16 -0600
  • Re: TEDDS Software Tue, 23 Oct 2007 06:00:16 -0600
  • Re: ASCE 7-05 Wed, 24 Oct 2007 06:10:25 -0600
  • Re: 12 x 18 printers Wed, 31 Oct 2007 05:40:49 -0600
  • Re: 11 x 17 copiers / scanners (was 12 x 18 printers) Wed, 31 Oct 2007 06:01:34 -0600
  • Re: FW: 11 x 17 copiers / scanners (was 12 x 18 printers) Thu, 1 Nov 2007 05:36:23 -0600
  • Re: 12 x 18 printers Thu, 1 Nov 2007 05:45:58 -0600
  • Re: question my authority???! Mon, 5 Nov 2007 05:44:43 -0700
  • Re: Structural Failure Mon, 5 Nov 2007 06:01:05 -0700
  • Re: question my authority???! Tue, 6 Nov 2007 05:36:13 -0700
  • Re: Structural Engineering Spreadsheets Tue, 6 Nov 2007 05:41:35 -0700
  • Re: Sustainable companies Mon, 12 Nov 2007 05:37:54 -0700
  • Re: Structural Engineering Spreadsheets Mon, 12 Nov 2007 05:53:36 -0700
  • Re: Strawbale engineering Mon, 19 Nov 2007 05:38:21 -0700
  • Re: PEMB foundation uplift Thu, 22 Nov 2007 05:58:44 -0700
  • Re: Wind tower design Thu, 22 Nov 2007 06:13:18 -0700
  • Re: Freezer Building Roof Snow Load Thu, 29 Nov 2007 05:27:57 -0700
  • Re: weld symbols Fri, 30 Nov 2007 09:24:10 -0700
  • Re: Stair stringer design for continuous kinked stringer Tue, 11 Dec 2007 05:54:05 -0700
  • Happy New Year Mon, 31 Dec 2007 06:13:06 -0700

• Gary Loomis
  • RE: Choice between intermittent and continuous fillet weld in Crane girder ( I beam with channel top) Mon, 8 Oct 2007 11:45:14 -0600
  • RE: Foundations for a 3-pinned arch stadium Tue, 9 Oct 2007 06:13:59 -0600
  • RE: MFR home foundations Wed, 10 Oct 2007 21:17:18 -0600
  • RE: Anchor Shear Shear Capacity in Reinforced Concrete Mon, 29 Oct 2007 16:00:45 -0600
  • Structural Failure Sun, 4 Nov 2007 17:55:07 -0700
  • RE: Structural Failure Sun, 4 Nov 2007 23:02:37 -0700
  • RE: question my authority???! Mon, 5 Nov 2007 07:05:57 -0700
  • RE: Hay and Straw, was Re: sustainable companies Mon, 19 Nov 2007 07:11:01 -0700
  • RE: wide flange beam to jst girder Wed, 28 Nov 2007 11:18:42 -0700
  • RE: Design of Pavement Section Thu, 20 Dec 2007 15:14:18 -0700
  • Procedures Thu, 27 Dec 2007 14:36:02 -0700
  • RE: Procedures Fri, 28 Dec 2007 15:35:35 -0700

• garyg
  • Alternate Braced Walls and SDC D Sat, 8 Dec 2007 17:08:54 -0700

• Gautam Manandhar
  • Expansive Foundation Fri, 12 Oct 2007 16:14:49 -0600
  • RE: Expansive Foundation Tue, 16 Oct 2007 13:12:23 -0600
  • RE: Mathcad Thu, 1 Nov 2007 13:36:08 -0600
  • RE:OT- Scanners Fri, 2 Nov 2007 13:11:25 -0600

• Gdrafting gdrafting
  • Detailing Mon, 5 Nov 2007 21:33:22 -0700

• Gerard Madden, SE
  • Radiused angle ledger Thu, 4 Oct 2007 15:33:18 -0600
  • Re: 8" Columns Fri, 5 Oct 2007 10:49:19 -0600
  • Re: Radiused angle ledger Fri, 5 Oct 2007 11:02:39 -0600
  • Re: 8" Columns Sat, 6 Oct 2007 00:23:04 -0600
  • Re: AISC Table X (9th Ed.) or Table 10-9a (13th Ed.) Mon, 8 Oct 2007 13:36:55 -0600
  • Re: AISC Table X (9th Ed.) or Table 10-9a (13th Ed.) Mon, 8 Oct 2007 14:02:24 -0600
  • Re: Live Load for residential home gym Thu, 11 Oct 2007 10:27:54 -0600
  • Re: Live Load for residential home gym Thu, 11 Oct 2007 12:30:05 -0600
  • Re: Both face should have Shrinkage Steel in 12 inch thick Structural Slab (ACI318) Thu, 11 Oct 2007 12:33:14 -0600
  • Re: AISC Table X (9th Ed.) or Table 10-9a (13th Ed.) Thu, 11 Oct 2007 15:37:52 -0600
  • Re: Expansive Foundation Tue, 16 Oct 2007 22:17:31 -0600
  • Steel Shape Availability Thu, 18 Oct 2007 14:01:36 -0600
  • Re: Steel Plate Shear Walls Tue, 23 Oct 2007 14:52:34 -0600
  • LGS Framing Details Wed, 31 Oct 2007 12:14:00 -0600
  • Re: DESIGN PROGRAMS FOR NEW CODE Wed, 31 Oct 2007 12:17:37 -0600
  • Re: Is ASCE desperate for cash flow? Wed, 31 Oct 2007 15:22:32 -0600
  • Re: Is ASCE desperate for cash flow? Wed, 31 Oct 2007 16:17:52 -0600
  • Re: biofuels and further offfffff-topic Thu, 1 Nov 2007 14:24:24 -0600
  • Re: footings look too big Sat, 3 Nov 2007 13:19:59 -0600
  • Re: question my authority???! Mon, 5 Nov 2007 21:52:25 -0700
  • Re: water proof Mon, 5 Nov 2007 21:59:51 -0700
  • Re: Sustainable companies Sat, 10 Nov 2007 01:17:42 -0700
  • Re: sustainable companies Mon, 12 Nov 2007 14:04:45 -0700
  • Re: Construction Per Square Foot Cost Mon, 12 Nov 2007 15:05:05 -0700
  • Re: Steel SMRF beam connection Sun, 25 Nov 2007 16:16:20 -0700
  • Re: Why are my messages showing up twice? Sun, 25 Nov 2007 16:21:30 -0700
  • Re: OOP Wall Anchorage - min. size of wood framing member Mon, 26 Nov 2007 21:04:15 -0700
  • Re: EnerCalc 6 Mon, 3 Dec 2007 15:49:58 -0700
  • Re: Perforated shear walls Thu, 6 Dec 2007 23:25:57 -0700
  • Re: CA Licensure Thu, 6 Dec 2007 23:26:55 -0700
  • Re: Is there a better way (2x4 SW Anchor Bolts to comply with ACI 318-05 Appendix D)? Wed, 12 Dec 2007 13:04:48 -0700
  • Re: IBC Code Enforcement Mon, 17 Dec 2007 13:17:45 -0700
  • Re: Basic Roof Diaph. Question Mon, 17 Dec 2007 16:10:13 -0700
  • Re: jailbreak through CMU Tue, 18 Dec 2007 11:05:14 -0700
  • CBC 2007 Wind Load Tue, 18 Dec 2007 17:48:51 -0700
  • Re: CBC 2007 Wind Load Wed, 19 Dec 2007 00:22:43 -0700
  • Re: CBC 2007 Wind Load Wed, 19 Dec 2007 10:55:56 -0700
  • Re: HSS welds Sat, 22 Dec 2007 12:27:46 -0700
  • Re: Procedures Fri, 28 Dec 2007 14:48:21 -0700

• Gil Brock
  • Re: Transfer Girder Design having more Depth Wed, 14 Nov 2007 19:09:29 -0700
  • Re: ADAPT or POSTEN ?? Sun, 18 Nov 2007 16:57:51 -0700
  • Re: Expansion Joint in Tunnel Tue, 20 Nov 2007 16:46:47 -0700
  • Re: Openings in concrete beams Fri, 7 Dec 2007 23:00:20 -0700

• Gould, Diane
  • Online archive of old Uniform Building Codes? Thu, 15 Nov 2007 11:42:50 -0700

• GRUPO CG
  • RE: Architects! Thu, 13 Dec 2007 11:29:16 -0700

• Guadalupe Rivera
  • Re: IBC Conventional Light Framed Construction Wed, 17 Oct 2007 11:34:43 -0600
  • Conventional Light Framed Construction Vs. Engineered Building Fri, 19 Oct 2007 16:00:41 -0600

• Haan, Scott M POA
  • RE: MFR home foundations Wed, 10 Oct 2007 17:59:08 -0600
  • RE: ASCE 7-05 Mon, 22 Oct 2007 16:55:10 -0600
  • RE: ASCE 7-05 Mon, 22 Oct 2007 17:15:13 -0600
  • RE: ASCE 7-05 Tue, 23 Oct 2007 11:40:46 -0600
  • RE: ASCE 7-05 Tue, 23 Oct 2007 12:16:08 -0600
  • RE: ASCE 7-05 Tue, 23 Oct 2007 13:52:40 -0600
  • RE: Anchor Shear Shear Capacity in Reinforced Concrete Mon, 29 Oct 2007 15:22:03 -0600
  • RE: Bill Polhemus, that was a cheap shot Thu, 1 Nov 2007 12:16:47 -0600
  • Mathcad vs. Matlab Thu, 1 Nov 2007 12:25:00 -0600
  • RE: biofuels and further off-topic Thu, 1 Nov 2007 12:56:08 -0600
  • RE: Bill Polhemus, that was a cheap shot Thu, 1 Nov 2007 13:17:03 -0600
  • RE: biofuels and further off-topic Thu, 1 Nov 2007 14:56:43 -0600
  • RE: biofuels and further off-topic Thu, 1 Nov 2007 15:03:06 -0600
  • RE: biofuels and further off-topic Thu, 1 Nov 2007 15:32:23 -0600
  • RE: Wind drift Thu, 1 Nov 2007 17:36:33 -0600
  • footings look too big Fri, 2 Nov 2007 17:34:46 -0600
  • RE: footings look too big Fri, 2 Nov 2007 17:48:58 -0600
  • RE: footings look too big Fri, 2 Nov 2007 18:37:20 -0600
  • RE: Structural Engineering Spreadsheets - new Excel Version with XLSX! - thanks Microsoft Tue, 6 Nov 2007 13:22:39 -0700
  • October Structural Engineer " Resisting Lateral Forces Cumulative overturning design" Tue, 6 Nov 2007 13:42:07 -0700
  • gypsum suspended ceiling detail Tue, 13 Nov 2007 16:01:37 -0700
  • RE: EnerCalc 6 Mon, 3 Dec 2007 15:37:25 -0700
  • RE: Basic Roof Diaph. Question Mon, 17 Dec 2007 19:06:23 -0700
  • RE: jailbreak through CMU Tue, 18 Dec 2007 11:12:26 -0700
  • RE: EnerCalc 6 Tue, 18 Dec 2007 16:38:17 -0700

• hadiprawira djohan
  • Re: footings look too big Sat, 3 Nov 2007 17:14:15 -0600

• Harold Sprague
  • RE: Foundations for a 3-pinned arch stadium Mon, 8 Oct 2007 22:07:27 -0600
  • RE: MFR home foundations Fri, 12 Oct 2007 11:19:41 -0600
  • RE: Expansive Foundation Sat, 13 Oct 2007 10:47:03 -0600
  • RE: 2006 IBC vs 2003 NEHRP Wed, 17 Oct 2007 14:02:13 -0600
  • RE: Frost Line Wed, 24 Oct 2007 12:43:39 -0600
  • RE: Frost footings - whats the big deal? Mon, 5 Nov 2007 21:13:04 -0700
  • RE: Wind drift Thu, 8 Nov 2007 09:44:38 -0700
  • RE: Transfer force of large tie beam Mon, 12 Nov 2007 20:45:41 -0700
  • RE: Transfer force of large tie beam Tue, 13 Nov 2007 17:43:13 -0700
  • RE: Cofar metal decking Wed, 14 Nov 2007 15:22:17 -0700
  • RE: Slide Rule Era (Cofar metal decking ) Thu, 15 Nov 2007 09:40:00 -0700
  • RE: Online archive of old Uniform Building Codes? Thu, 15 Nov 2007 12:45:22 -0700
  • RE: Reclaim Concrete Tunnel Thu, 15 Nov 2007 13:04:04 -0700
  • RE: Wind tower design Mon, 19 Nov 2007 10:17:32 -0700
  • RE: Wind tower design Wed, 21 Nov 2007 10:01:48 -0700
  • RE: Expansion Joint in Tunnel Wed, 21 Nov 2007 10:36:35 -0700
  • RE: Wind Uplift on Footings Wed, 21 Nov 2007 14:10:16 -0700
  • RE: Wind tower design Sat, 24 Nov 2007 12:51:45 -0700
  • RE: Wind tower design Sun, 25 Nov 2007 20:27:12 -0700
  • RE: Why 0.2 and 1 sec for Ss and S1? Thu, 6 Dec 2007 15:05:49 -0700
  • RE: Snow drift Tue, 18 Dec 2007 15:56:54 -0700
  • RE: Design Examples Wed, 26 Dec 2007 11:10:44 -0700
  • E-Defense Blind Analysis Contest Results Thu, 27 Dec 2007 11:06:47 -0700
  • RE: Fundamental period of tanks Thu, 27 Dec 2007 14:36:59 -0700
  • RE: Contec AAC Fri, 28 Dec 2007 16:14:07 -0700

• Harouni Joseph
  • Re: Structural Engineering Spreadsheets Fri, 2 Nov 2007 12:26:26 -0600

• HBAP
  • Re: ENERCALC 6 Mon, 3 Dec 2007 19:04:55 -0700
  • Re: ENERCALC 6 Tue, 4 Dec 2007 12:59:43 -0700

• Henry Fairbairn
  • Re: Design of Pavement Section Fri, 28 Dec 2007 16:14:49 -0700

• hossein mardanlo
  • [no subject] Sat, 10 Nov 2007 14:29:39 -0700
  • [no subject] Sat, 10 Nov 2007 14:40:11 -0700

• IRV FRUCHTMAN
  • Re: Strenth and Stiffness of 1x diagonal floor sheathing?? Wed, 3 Oct 2007 07:38:08 -0600
  • Re: AW: Boring through GLBs Sun, 9 Dec 2007 16:28:27 -0700

• Jake Watson
  • SE Practice Act Thu, 1 Nov 2007 19:55:21 -0600
  • Re: CA & WA SE reciprocity Fri, 23 Nov 2007 11:39:53 -0700
  • Re: CA & WA SE reciprocity Sat, 24 Nov 2007 14:27:47 -0700
  • F1554 and Fatigue Mon, 10 Dec 2007 13:26:44 -0700
  • Re: Tilt-Up Wall Submittal Review Thu, 13 Dec 2007 21:17:36 -0700

• James Cohen
  • Stresscore Tue, 2 Oct 2007 12:00:51 -0600

• James Getaz
  • RE: Hilti powder-actu fasteners Sun, 11 Nov 2007 10:55:23 -0700

• James Hannah
  • Re: Transfer force of large tie beam Mon, 12 Nov 2007 22:01:33 -0700
  • Re: Wind Uplift on Footings Wed, 21 Nov 2007 21:50:14 -0700

• jascopac
  • RE: Architects! Wed, 12 Dec 2007 14:57:40 -0700

• Jason Christensen
  • 64 bit computers systems Mon, 29 Oct 2007 10:19:40 -0600
  • RE: 64 bit computers systems Mon, 29 Oct 2007 13:10:47 -0600
  • RE: 64 bit computers systems Mon, 29 Oct 2007 14:11:04 -0600
  • RE: 64 bit computers systems Mon, 29 Oct 2007 15:55:37 -0600
  • RE: 64 bit computers systems Mon, 29 Oct 2007 16:42:35 -0600
  • RE: 64 bit computers systems Tue, 30 Oct 2007 09:15:49 -0600
  • RE: Is ASCE desperate for cash flow? Wed, 31 Oct 2007 15:32:08 -0600
  • Fiber Reinforced slab Thu, 8 Nov 2007 10:49:13 -0700
  • RE: 2006 IBC WIND ANALYSIS Question Fri, 16 Nov 2007 13:36:07 -0700
  • Wide flange bearing connection Mon, 26 Nov 2007 15:04:55 -0700
  • RE: Wide flange bearing connection Mon, 26 Nov 2007 17:02:53 -0700
  • RE: Wide flange bearing connection Tue, 27 Nov 2007 08:47:06 -0700
  • RE: Wide flange bearing connection Tue, 27 Nov 2007 08:49:12 -0700
  • RE: Perforated shear walls Thu, 6 Dec 2007 17:43:25 -0700
  • RE: Perforated shear walls Fri, 7 Dec 2007 09:08:17 -0700
  • RE: Perforated shear walls Fri, 7 Dec 2007 10:38:40 -0700
  • RE: Perforated shear walls Fri, 7 Dec 2007 10:58:06 -0700
  • RE: Perforated shear walls Fri, 7 Dec 2007 11:17:07 -0700
  • RE: Perforated shear walls Fri, 7 Dec 2007 13:32:28 -0700
  • RE: Perforated shear walls Fri, 7 Dec 2007 13:37:08 -0700
  • RE: Snow drift Tue, 18 Dec 2007 10:10:42 -0700
  • Special CMU walls Wed, 19 Dec 2007 21:30:21 -0700

• Jason Emoto
  • RE: footings look too big Fri, 2 Nov 2007 18:30:52 -0600
  • RE: USGS Web address for determining IBC SDC and Base Shear Wed, 14 Nov 2007 11:24:59 -0700

• Javier Encinas
  • RE: Wind Uplift on Footings Wed, 21 Nov 2007 14:22:42 -0700

• JC Wish L
  • Re: Openings in concrete beams Wed, 12 Dec 2007 07:51:33 -0700

• jeff . giger
  • Jeff Giger/DAN/Minerals/METSO is out of the office. Sat, 22 Dec 2007 01:13:45 -0700

• Jeff Coronado
  • Re: UBC Wind Uplift on Fabric Shade Cover Thu, 15 Nov 2007 10:20:59 -0700

• Jeff Hedman
  • Re: MFR home foundations Thu, 11 Oct 2007 10:25:39 -0600
  • Re: MFR home foundations Fri, 12 Oct 2007 10:48:12 -0600
  • Re: Perforated shear walls Fri, 7 Dec 2007 08:48:08 -0700
  • Re: Perforated shear walls Fri, 7 Dec 2007 10:28:45 -0700
  • RE: Perforated shear walls Fri, 7 Dec 2007 11:43:48 -0700
  • RE: Perforated shear walls Fri, 7 Dec 2007 12:19:55 -0700
  • Re: Special CMU walls Thu, 20 Dec 2007 11:09:31 -0700

• Jeff Smith
  • 12 x 18 printers Tue, 30 Oct 2007 11:49:36 -0600
  • RE: 12 x 18 printers Tue, 30 Oct 2007 23:27:40 -0600
  • RE: Wind drift Thu, 1 Nov 2007 17:29:20 -0600
  • RE: Cantilevered Retaining Wall - Rule of Thumb Sun, 4 Nov 2007 21:24:17 -0700
  • RE: October Structural Engineer " Resisting Lateral Forces Cumulative overturning design" Tue, 6 Nov 2007 14:20:53 -0700
  • RE: October Structural Engineer " Resisting Lateral Forces Cumulative overturning design" Tue, 6 Nov 2007 14:27:54 -0700
  • RE: California Building Code and the 2006 IBC Tue, 6 Nov 2007 15:46:43 -0700
  • RE: gypsum suspended ceiling detail Tue, 13 Nov 2007 16:15:29 -0700
  • RE: gypsum suspended ceiling detail Tue, 13 Nov 2007 16:37:50 -0700
  • RE: Hay and Straw, was Re: sustainable companies Mon, 19 Nov 2007 19:28:16 -0700
  • RE: Steel SMRF beam connection Sun, 25 Nov 2007 13:40:25 -0700
  • Why are my messages showing up twice? Sun, 25 Nov 2007 13:49:39 -0700
  • R value UBC97 Thu, 29 Nov 2007 12:17:17 -0700
  • RE: underground house Thu, 29 Nov 2007 12:33:13 -0700
  • RE: underground house [gettin' pretty OT now] Thu, 29 Nov 2007 19:19:54 -0700
  • RE: underground house Fri, 30 Nov 2007 12:12:06 -0700
  • RE: R value UBC97 Mon, 3 Dec 2007 11:57:11 -0700
  • Perforated shear walls Thu, 6 Dec 2007 17:10:57 -0700
  • RE: Perforated shear walls Thu, 6 Dec 2007 17:58:00 -0700
  • RE: Perforated shear walls Thu, 6 Dec 2007 18:08:26 -0700
  • RE: Boring through GLBs Sat, 8 Dec 2007 11:11:23 -0700
  • Profis Software was RE: Great ASCE7 spreadsheet / ComboBoxes Tue, 11 Dec 2007 13:29:27 -0700
  • RE: Profis Software Wed, 12 Dec 2007 13:46:31 -0700
  • RE: Removing yourself as EOR Wed, 12 Dec 2007 14:31:08 -0700
  • RE: Wood Framed 2x4 SW Anchor Bolts to comply with ACI 318-05 Appendix D Requirements ? Thu, 13 Dec 2007 12:13:21 -0700
  • RE: Shamefully Off-Topic: Carbon Christmas Fri, 14 Dec 2007 19:09:06 -0700

• Jeremy Salmon
  • CA Licensure Thu, 6 Dec 2007 19:07:30 -0700

• Jeremy White
  • Re: CAD: AutoCAD Revit Structure Suite 2008 Tue, 16 Oct 2007 17:16:43 -0600
  • RE: CAD: AutoCAD Revit Structure Suite 2008 Wed, 17 Oct 2007 11:54:23 -0600
  • Re: Wide flange bearing connection Mon, 26 Nov 2007 17:30:23 -0700

• jerold taylor
  • Re: 11 x 17 copiers / scanners (was 12 x 18 printers) Tue, 30 Oct 2007 19:33:30 -0600
  • Re: FW: 11 x 17 copiers / scanners (was 12 x 18 printers) Wed, 31 Oct 2007 06:38:07 -0600
  • Uplift on Roof Sheathing - "Pull Through" Resistance Wed, 12 Dec 2007 09:58:10 -0700
  • technical References and Advice of CMU Wall Cracking Fri, 21 Dec 2007 13:11:51 -0700
  • Re: FW: RE: technical References and Advice of CMU Wall Cracking Fri, 21 Dec 2007 20:48:46 -0700
  • RE: technical References and Advice of CMU Wall Cracking Fri, 21 Dec 2007 20:50:55 -0700
  • Re: FW: RE: technical References and Advice of CMU Wall Cracking Sat, 22 Dec 2007 13:01:31 -0700

• Jerry Coombs
  • Re: Interior Door Forces Mon, 8 Oct 2007 06:41:46 -0600
  • Re: Foundations for a 3-pinned arch stadium Wed, 10 Oct 2007 06:40:41 -0600
  • Re: MFR home foundations Thu, 11 Oct 2007 06:59:42 -0600
  • RE: Live Load for residential home gym Thu, 11 Oct 2007 07:14:51 -0600
  • RE: Live Load for residential home gym Thu, 11 Oct 2007 07:36:20 -0600
  • RE: Live Load for residential home gym Thu, 11 Oct 2007 07:43:29 -0600
  • Re: Wood column with steel flitch plate Tue, 16 Oct 2007 05:30:13 -0600
  • Re: Expansive Foundation Wed, 17 Oct 2007 08:36:54 -0600
  • RE: paid for release of CAD files to subs... Tue, 23 Oct 2007 06:27:04 -0600
  • RE: paid for release of CAD files to subs... Tue, 23 Oct 2007 07:59:00 -0600
  • Re: ASCE 7-05 Mon, 29 Oct 2007 06:26:37 -0600
  • Re: slabs on grade... Mon, 29 Oct 2007 09:58:39 -0600
  • RE: slabs on grade... Mon, 29 Oct 2007 12:06:08 -0600
  • Re: 12 x 18 printers Wed, 31 Oct 2007 10:29:51 -0600
  • RE: Wind drift Fri, 2 Nov 2007 06:25:17 -0600
  • RE: SE Practice Act Fri, 2 Nov 2007 07:39:46 -0600
  • Re: water proof Tue, 6 Nov 2007 06:37:51 -0700
  • Re: question my authority???! (AKA Who is Eric Cartman?) Tue, 6 Nov 2007 07:04:39 -0700
  • Re: MATHCAD: Anyone Else Not Getting the Warm 'n' Fuzzies from PTC? Thu, 8 Nov 2007 05:52:21 -0700
  • Re: Fiber Reinforced slab Thu, 8 Nov 2007 13:09:58 -0700
  • Re: Adding Storefront to Existing CMU Wall Wed, 14 Nov 2007 11:02:28 -0700
  • Re: underground house Thu, 29 Nov 2007 10:47:43 -0700
  • Re: underground house Thu, 29 Nov 2007 10:50:03 -0700
  • Re: underground house Thu, 29 Nov 2007 11:03:25 -0700
  • weld symbols Thu, 29 Nov 2007 11:50:05 -0700
  • Re: Boring through GLBs Mon, 10 Dec 2007 06:55:18 -0700
  • RE: New and hopefully useful web site Fri, 14 Dec 2007 06:45:49 -0700
  • Re: Tilt-Up Wall Submittal Review Fri, 14 Dec 2007 06:55:01 -0700
  • RE: New and hopefully useful website Fri, 14 Dec 2007 07:01:32 -0700
  • RE: jailbreak through CMU Tue, 18 Dec 2007 09:35:42 -0700
  • Re: CBC 2007 Wind Load Fri, 21 Dec 2007 14:23:28 -0700

• Jim Chatterley PE
  • Fire Rated Assembly Consultants >> One Hour Floor / Ceiling Assembly UL - G525 & G531 Thu, 15 Nov 2007 12:12:06 -0700

• Jim Getaz
  • Re: question my authority???! Getting way OT Tue, 6 Nov 2007 06:32:27 -0700
  • Hay and Straw, was Re: sustainable companies Mon, 19 Nov 2007 06:51:26 -0700
  • Re: welded wire fabric for columns Tue, 11 Dec 2007 05:46:05 -0700
  • Re: welded wire fabric for columns Wed, 12 Dec 2007 06:09:50 -0700
  • Re: CBC 2007 Wind Load Wed, 19 Dec 2007 07:37:39 -0700
  • RE: Design Examples Thu, 27 Dec 2007 05:54:44 -0700
  • Re: Procedures Fri, 28 Dec 2007 06:28:17 -0700

• Jim Lutz
  • RE: UBC 1630.8.2.2.1.7 Bracing Load Thu, 4 Oct 2007 09:18:36 -0600

• Jim Persing
  • Re: UBC 1630.8.2.2.1.7 Bracing Load Mon, 8 Oct 2007 09:08:21 -0600
  • Re: AISC Table X (9th Ed.) or Table 10-9a (13th Ed.) Thu, 11 Oct 2007 15:26:19 -0600
  • Re: UBC 1630.8.2.2.1.7 Bracing Load Thu, 11 Oct 2007 16:22:54 -0600
  • Re: UBC 1630.8.2.2.1.7 Bracing Load Fri, 12 Oct 2007 14:22:11 -0600
  • Re: Anchorage to concrete Wed, 7 Nov 2007 23:25:35 -0700
  • Re: PEMB foundation uplift Wed, 21 Nov 2007 21:43:27 -0700

• Jim Wilson
  • Re: MFR home foundations Tue, 16 Oct 2007 19:49:06 -0600
  • Frost footings - whats the big deal? Mon, 5 Nov 2007 08:39:18 -0700
  • Re: Frost footings - whats the big deal? Tue, 6 Nov 2007 18:52:50 -0700
  • Stair stringer design for continuous kinked stringer Mon, 10 Dec 2007 08:38:19 -0700
  • Re: Stair stringer design for continuous kinked stringer Tue, 11 Dec 2007 06:35:59 -0700
  • Re: Bethlehem Steel Building Case Histories Mon, 17 Dec 2007 06:22:33 -0700
  • Re: EnerCalc 6 Tue, 18 Dec 2007 18:47:37 -0700

• Jimenez, Jorge A.
  • RE: I am unavailable to respond to your email. If you need immediate assistance or would like Wed, 24 Oct 2007 06:26:55 -0600
  • RE: Bill Polhemus, that was a cheap shot Thu, 1 Nov 2007 08:55:33 -0600

• Jnapd
  • Re: Is ASCE desperate for cash flow? Wed, 31 Oct 2007 15:30:25 -0600
  • Re: SE Practice Act Fri, 2 Nov 2007 11:50:17 -0600
  • Re: Structural Engineering Spreadsheets Fri, 2 Nov 2007 12:13:37 -0600
  • Re: Structural Engineering Spreadsheets Fri, 2 Nov 2007 13:18:18 -0600
  • Re: footings look too big Sun, 4 Nov 2007 10:12:27 -0700
  • Re: Subject: Re: sustainable companies Thu, 15 Nov 2007 18:58:29 -0700
  • Re: Embarrassingly dumb question Tue, 20 Nov 2007 19:41:30 -0700
  • Re: I may have made a huge mistake... Tue, 27 Nov 2007 16:25:08 -0700
  • Re: Sloped Rafter Bearing Tue, 4 Dec 2007 13:06:52 -0700
  • Re: Sloped Rafter Bearing Tue, 4 Dec 2007 18:35:54 -0700
  • Re: Sloped Rafter Bearing Wed, 5 Dec 2007 10:47:24 -0700
  • Re: Perforated shear walls Thu, 6 Dec 2007 17:56:06 -0700
  • Re: welded wire fabric for columns Tue, 11 Dec 2007 13:25:03 -0700
  • Re: welded wire fabric for columns Tue, 11 Dec 2007 15:29:38 -0700
  • Re: welded wire fabric for columns Wed, 12 Dec 2007 09:49:51 -0700
  • Re: Is there a better way (2x4 SW Anchor Bolts to comply with ACI 318-05 Appe... Wed, 12 Dec 2007 13:44:22 -0700
  • Re: Removing yourself as EOR Wed, 12 Dec 2007 14:41:41 -0700
  • Re: Special CMU walls Thu, 20 Dec 2007 11:56:01 -0700
  • Re: Design of Pavement Section Thu, 20 Dec 2007 14:34:41 -0700
  • Re: Design of Pavement Section Thu, 20 Dec 2007 14:54:11 -0700
  • Re: Happy New Year Mon, 31 Dec 2007 10:02:10 -0700

• John Atilano
  • RE: S1 and Ss by address Thu, 4 Oct 2007 12:35:30 -0600

• John Buchanan
  • Anchorage to concrete Wed, 7 Nov 2007 10:15:13 -0700

• John Gobster
  • RE: Live and Dead Load Spreadsheet Mon, 10 Dec 2007 10:49:43 -0700

• John Nader
  • Job in the UAE Thu, 1 Nov 2007 06:48:43 -0600

• Jordan Truesdell, PE
  • Re: Foundations for a 3-pinned arch stadium Mon, 8 Oct 2007 06:42:40 -0600
  • Re: MFR home foundations Wed, 10 Oct 2007 19:10:47 -0600
  • Re: Live Load for residential home gym Wed, 10 Oct 2007 19:13:45 -0600
  • Re: Wood column with steel flitch plate Tue, 16 Oct 2007 07:21:10 -0600
  • Re: A3 Laser printers Sun, 4 Nov 2007 12:03:53 -0700
  • Re: Structural Failure Sun, 4 Nov 2007 18:15:12 -0700
  • Re: Cantilevered Retaining Wall - Rule of Thumb Mon, 5 Nov 2007 05:53:32 -0700
  • Anyone have SAG10, or know someone? Mon, 5 Nov 2007 06:28:22 -0700
  • Re: Cantilevered Retaining Wall - Footings are Definately Too Big Tue, 6 Nov 2007 19:20:14 -0700
  • Re: Frost footings - whats the big deal? Tue, 6 Nov 2007 19:27:34 -0700
  • Re: October Structural Engineer " Resisting Lateral Forces Cumulative overturning design" Wed, 7 Nov 2007 08:17:13 -0700
  • Re: lifting preassemble structures Thu, 8 Nov 2007 08:42:31 -0700
  • Re: Fiber Reinforced slab Thu, 8 Nov 2007 11:39:39 -0700
  • Re: MATHCAD: Anyone Else Not Getting the Warm 'n' Fuzzies from PTC? Thu, 8 Nov 2007 18:29:12 -0700
  • Re: A3 Laser printers Fri, 9 Nov 2007 17:04:29 -0700
  • Re: Sustainable companies Sat, 10 Nov 2007 05:23:17 -0700
  • Re: Hilti powder-actu fasteners Sun, 11 Nov 2007 11:27:53 -0700
  • Re: Sustainable companies Sun, 11 Nov 2007 11:38:01 -0700
  • Re: Transfer force of large tie beam Mon, 12 Nov 2007 07:07:05 -0700
  • Re: Transfer force of large tie beam Mon, 12 Nov 2007 08:46:58 -0700
  • Strawbale engineering (was: sust. engr) Sat, 17 Nov 2007 09:26:41 -0700
  • Re: Revit Structural (vista/xp) Sun, 18 Nov 2007 07:15:14 -0700
  • Re: ASCE 7-05 Wind Wed, 21 Nov 2007 10:16:27 -0700
  • Re: Responsiblity for local conditions Wed, 21 Nov 2007 10:59:25 -0700
  • Re: Uplift on Footings: Superior Foundation Walls Wed, 21 Nov 2007 11:05:39 -0700
  • Re: ASCE 7-05 Wind Wed, 21 Nov 2007 18:30:02 -0700
  • Re: PEMB foundation uplift Wed, 21 Nov 2007 18:38:38 -0700
  • Re: Cantilevered Retaining Wall - Rule of Thumb Mon, 26 Nov 2007 10:25:12 -0700
  • Re: underground house Fri, 30 Nov 2007 10:50:34 -0700
  • Re: jailbreak through CMU Tue, 18 Dec 2007 14:01:11 -0700
  • Re: Procedures Fri, 28 Dec 2007 05:06:13 -0700
  • Re: Design Examples Fri, 28 Dec 2007 05:34:00 -0700

• Joseph Harouni
  • Re: I may have made a huge mistake... Tue, 27 Nov 2007 16:59:11 -0700
  • CBC 2007 Seminar (free) Mon, 3 Dec 2007 18:00:48 -0700

• Joseph R. Grill
  • Steel Shapes Booklet Tue, 9 Oct 2007 07:41:16 -0600
  • Re: concrete drop panels Tue, 9 Oct 2007 21:11:43 -0600
  • Re: Steel Shapes Booklet Wed, 10 Oct 2007 08:15:46 -0600
  • Re: MFR home foundations Wed, 10 Oct 2007 17:33:15 -0600
  • Re: HSS welds & HSS in general Fri, 30 Nov 2007 21:07:20 -0700
  • Re: New and hopefully useful web site Thu, 13 Dec 2007 09:48:10 -0700

• Josh Plummer
  • RE: 64 bit computers systems Mon, 29 Oct 2007 20:38:55 -0600
  • RE: 64 bit computers systems Tue, 30 Oct 2007 08:51:00 -0600
  • RE: 64 bit computers systems Thu, 1 Nov 2007 07:30:53 -0600
  • RE: Transfer Girder Design having more Depth Wed, 14 Nov 2007 18:56:03 -0700
  • Re: Transfer Girder Design having more Depth Thu, 15 Nov 2007 09:48:25 -0700
  • RE: jailbreak through CMU Tue, 18 Dec 2007 18:46:41 -0700

• Kevin Below
  • Foundations for a 3-pinned arch stadium Sun, 7 Oct 2007 20:27:51 -0600
  • Re: Foundations for a 3-pinned arch stadium Mon, 8 Oct 2007 21:25:03 -0600
  • Re: Foundations for a 3-pinned arch stadium Tue, 9 Oct 2007 18:41:14 -0600
  • Re: Foundations for a 3-pinned arch stadium Tue, 9 Oct 2007 18:42:00 -0600
  • Re: Foundations for a 3-pinned arch stadium Tue, 9 Oct 2007 18:54:14 -0600
  • Re: UBC 1630.8.2.2.1.7 Bracing Load Tue, 9 Oct 2007 19:07:40 -0600
  • Re: Foundations for a 3-pinned arch stadium Thu, 11 Oct 2007 19:35:53 -0600
  • Re: UBC 1630.8.2.2.1.7 Bracing Load Thu, 11 Oct 2007 20:21:49 -0600
  • Re: Mathcad vs. Matlab Thu, 1 Nov 2007 18:49:36 -0600
  • Post-tensioned or reinforced ? Fri, 16 Nov 2007 19:53:00 -0700
  • Wind tower design Fri, 16 Nov 2007 20:02:52 -0700
  • Re: Wind tower design Mon, 19 Nov 2007 10:54:55 -0700
  • Re: Wind tower design Mon, 19 Nov 2007 18:12:23 -0700
  • Re: Wind tower design Wed, 21 Nov 2007 21:06:04 -0700
  • Re: Wind tower design Wed, 21 Nov 2007 21:49:29 -0700
  • Re: Basic Roof Diaph. Question Mon, 17 Dec 2007 18:57:33 -0700

• Kipp Martin
  • Re: AISC Table X (9th Ed.) or Table 10-9a (13th Ed.) Tue, 9 Oct 2007 08:28:55 -0600
  • Re: CA & WA SE reciprocity Tue, 27 Nov 2007 14:28:34 -0700
  • Re: Fundamental period of tanks Fri, 28 Dec 2007 10:49:54 -0700

• Lakhani, Sid
  • Metal Beam Guard Railing Section -Queation Sun, 4 Nov 2007 12:02:18 -0700
  • RE: Cantilevered Retaining Wall - Rule of Thumb Sun, 4 Nov 2007 21:22:56 -0700

• Lakshmana Nukala
  • Hot Rolled Vs Cold formed steel properties Fri, 26 Oct 2007 23:34:29 -0600

• Larry Bryant
  • RE: biofuels and further off-topic Thu, 1 Nov 2007 17:03:08 -0600
  • RE: Slide Rule Era Wed, 14 Nov 2007 17:25:21 -0700

• Larry Hauer
  • RE: Hand Lettering Font for Windows programs and for CAD programs that use True-Type fonts. Mon, 22 Oct 2007 08:06:09 -0600
  • RE: footings look too big Sat, 3 Nov 2007 08:57:37 -0600
  • RE: footings look too big Mon, 5 Nov 2007 15:23:13 -0700
  • RE: USGS Web address for determining IBC SDC and Base Shear Fri, 16 Nov 2007 07:31:21 -0700

• Lloyd Pack
  • Removing yourself as EOR Wed, 12 Dec 2007 09:00:09 -0700
  • Re: Removing yourself as EOR Wed, 12 Dec 2007 19:22:15 -0700
  • Re: Design of Pavement Section Fri, 21 Dec 2007 10:50:01 -0700

• M. David Finley, P.E., P.A.
  • RE: MFR home foundations Thu, 11 Oct 2007 06:36:28 -0600
  • Anchor Shear Shear Capacity in Reinforced Concrete Mon, 29 Oct 2007 14:42:34 -0600
  • RE: biofuels and further offfffff-topic Thu, 1 Nov 2007 14:23:14 -0600

• m.labafzadeh
  • Equivallent Frame Method for RC shear walls Fri, 9 Nov 2007 23:49:39 -0700

• mail
  • PEMB Foundation - Foundation Resistance to Uplift Wed, 31 Oct 2007 06:04:06 -0600
  • Roof Diaphragm Analysis Wed, 5 Dec 2007 07:38:59 -0700

• Mark D. Webster
  • Sustainable companies Tue, 13 Nov 2007 07:12:23 -0700

• Mark Deardorff
  • RE: Good reference or explanatory notes/example on Seismic Load Calculation based on ASCE 7-05 for building as well as non building structures Wed, 3 Oct 2007 15:40:33 -0600
  • S1 and Ss by address Thu, 4 Oct 2007 12:24:39 -0600
  • RE: AISC Table X (9th Ed.) or Table 10-9a (13th Ed.) Fri, 5 Oct 2007 16:19:39 -0600
  • RE: concrete drop panels Tue, 9 Oct 2007 08:26:58 -0600
  • RE: concrete drop panels Tue, 9 Oct 2007 09:14:32 -0600
  • ASCE 7-05 Fri, 19 Oct 2007 10:35:44 -0600
  • RE: ASCE 7-05 Fri, 19 Oct 2007 10:47:31 -0600
  • RE: ASCE 7-05 Fri, 19 Oct 2007 12:13:35 -0600
  • RE: wind uplift + lateral loads Wed, 24 Oct 2007 11:30:02 -0600
  • RE: California PE/SE References Thu, 25 Oct 2007 11:01:54 -0600
  • RE: slabs on grade... Tue, 30 Oct 2007 12:16:04 -0600
  • AISC Seismic Provisions Tue, 30 Oct 2007 16:42:04 -0600
  • AISC Prequalified Connection Provisions Wed, 31 Oct 2007 09:16:14 -0600
  • RE: AISC Prequalified Connection Provisions Wed, 31 Oct 2007 09:43:08 -0600
  • RE: Is ASCE desperate for cash flow? Wed, 31 Oct 2007 15:49:25 -0600
  • RE: Mathcad vs. Matlab Thu, 1 Nov 2007 12:49:41 -0600
  • Wind drift Thu, 1 Nov 2007 16:51:45 -0600
  • RE: Earthquake-Proof Design Fri, 2 Nov 2007 14:40:52 -0600
  • RE: Precast manhole design Fri, 2 Nov 2007 14:43:37 -0600
  • RE: October Structural Engineer " Resisting Lateral Forces Cumulative overturning design" Tue, 6 Nov 2007 14:29:22 -0700
  • Self-straining Force Tue, 6 Nov 2007 14:39:48 -0700
  • RE: Self-straining Force Tue, 6 Nov 2007 15:03:45 -0700
  • RE: sustainable companies Mon, 12 Nov 2007 14:11:00 -0700
  • RE: Construction Per Square Foot Cost Mon, 12 Nov 2007 14:50:10 -0700
  • RE: USGS Web address for determining IBC SDC and Base Shear Wed, 14 Nov 2007 11:19:53 -0700
  • RE: Revit Structural Thu, 15 Nov 2007 13:32:37 -0700
  • RE: Revit Structural Thu, 15 Nov 2007 13:59:02 -0700

• Mark Gilligan
  • Re: USGS Web address for determining IBC SDC and Base Shear Tue, 13 Nov 2007 23:51:17 -0700
  • RE: Wind Uplift on Footings Wed, 21 Nov 2007 00:26:28 -0700
  • Wind Speeds in California Wed, 21 Nov 2007 00:39:59 -0700
  • Re: Tilt-Up Wall Submittal Review Fri, 14 Dec 2007 10:04:07 -0700
  • RE: Procedures Thu, 27 Dec 2007 17:55:59 -0700

• Mark Johnson
  • 2006 IBC vs 2003 NEHRP Tue, 16 Oct 2007 13:28:07 -0600
  • RE: 2006 IBC vs 2003 NEHRP Tue, 16 Oct 2007 22:10:48 -0600
  • RE: 2006 IBC vs 2003 NEHRP Thu, 18 Oct 2007 16:32:15 -0600
  • Great ASCE7 spreadsheet Mon, 3 Dec 2007 11:45:27 -0700
  • Re: Great ASCE7 spreadsheet Tue, 4 Dec 2007 08:41:11 -0700
  • Re: New and hopefully useful web site Thu, 13 Dec 2007 09:40:14 -0700
  • RE: New and hopefully useful website Fri, 14 Dec 2007 09:35:48 -0700
  • Address to Lat/Long Converter Thu, 20 Dec 2007 12:16:02 -0700
  • HSS welds Sat, 22 Dec 2007 10:42:19 -0700
  • Re: Design Examples Fri, 28 Dec 2007 10:32:46 -0700
  • Re: Design Examples Fri, 28 Dec 2007 15:14:38 -0700

• Mark L. Puccio
  • RE: slabs on grade... Tue, 30 Oct 2007 07:39:02 -0600

• Mark Pemberton
  • Re: Another Wind Question Tue, 27 Nov 2007 14:53:39 -0700
  • Re: IBC Code Enforcement Mon, 17 Dec 2007 11:10:44 -0700
  • Re: IBC Code Enforcement Mon, 17 Dec 2007 12:37:05 -0700
  • Re: IBC Code Enforcement Mon, 17 Dec 2007 14:49:48 -0700

• Mark Remmetter
  • RE: Pre-Engr. Mtl Bldg. W/ Tilt-up Wall Mon, 1 Oct 2007 13:05:06 -0600

• Marlou Rodriguez
  • RE: metal siding screwed to steel Wed, 3 Oct 2007 21:13:18 -0600
  • RE: TEDDS Software Tue, 23 Oct 2007 10:35:08 -0600
  • RE: footings look too big Fri, 2 Nov 2007 20:40:16 -0600
  • RE: October Structural Engineer " Resisting Lateral Forces Cumulative overturning design" Tue, 6 Nov 2007 15:40:11 -0700
  • RE: Wind Uplift on Footings Tue, 20 Nov 2007 21:58:41 -0700
  • RE: Responsiblity for local conditions Tue, 20 Nov 2007 22:09:45 -0700

• Martin Li
  • RE: water proof Tue, 6 Nov 2007 08:28:53 -0700
  • RE: snow drift and adjacent buildings Thu, 8 Nov 2007 15:03:35 -0700

• Micayas, Julius
  • RE: SEISMIC: Seismic Factors for Qatar Mon, 1 Oct 2007 15:05:45 -0600
  • RE: Live Load for residential home gym Thu, 11 Oct 2007 07:04:15 -0600
  • RE: Live Load for residential home gym Thu, 11 Oct 2007 07:48:06 -0600
  • RE: TEDDS Software Tue, 23 Oct 2007 12:11:07 -0600
  • RE: TEDDS Software Tue, 23 Oct 2007 12:20:58 -0600
  • Frost Line Wed, 24 Oct 2007 10:46:43 -0600
  • RE: Frost Line Wed, 24 Oct 2007 11:07:44 -0600
  • RE: Job in the UAE Thu, 1 Nov 2007 07:15:39 -0600
  • RE: Mathcad vs. Matlab Thu, 1 Nov 2007 12:59:33 -0600
  • RE: Frost footings - whats the big deal? Mon, 5 Nov 2007 09:38:28 -0700
  • RE: Sustainable companies Mon, 12 Nov 2007 07:23:49 -0700
  • Reclaim Concrete Tunnel Thu, 15 Nov 2007 09:50:32 -0700
  • RE: New and hopefully useful web site Thu, 13 Dec 2007 12:50:54 -0700
  • RE: ASCE7 Question Wed, 19 Dec 2007 14:27:34 -0700

• Michael Brooks
  • Re: DESIGN PROGRAMS FOR NEW CODE Wed, 31 Oct 2007 11:56:03 -0600
  • ENERCALC 6 Mon, 3 Dec 2007 17:33:16 -0700

• Michel
  • Re: Bill Polhemus, that was a cheap shot Wed, 31 Oct 2007 22:28:27 -0600
  • Re: footings look too big Fri, 2 Nov 2007 18:54:10 -0600
  • Cantilevered Retaining Wall - Rule of Thumb Sun, 4 Nov 2007 20:55:22 -0700
  • Cantilevered Retaining Wall - Footings are Definately Too Big Tue, 6 Nov 2007 18:39:01 -0700
  • Re: Sustainable companies/global warming Sun, 11 Nov 2007 13:10:27 -0700
  • Re: Shamefully Off-Topic: Carbon Christmas Fri, 21 Dec 2007 18:00:42 -0700

• Michel Blangy
  • RE: Live Load for residential home gym Thu, 11 Oct 2007 09:43:06 -0600
  • RE: Hilti powder-actu fasteners Fri, 9 Nov 2007 11:38:24 -0700
  • RE: Sustainable companies Mon, 12 Nov 2007 09:56:38 -0700
  • Construction Per Square Foot Cost Mon, 12 Nov 2007 14:41:08 -0700
  • RE: Construction Per Square Foot Cost Mon, 12 Nov 2007 14:54:01 -0700

• Mike Hokama
  • QUESTION REGARDING GLB REINFORCING? Thu, 15 Nov 2007 10:01:29 -0700

• Mike Jones
  • RE: Live Load for residential home gym Thu, 11 Oct 2007 08:02:27 -0600
  • RE: ASCE 7-05 Tue, 23 Oct 2007 12:26:44 -0600

• Murvin Ragaven
  • Connections between timber batterns/purlins with concrete slab Mon, 10 Dec 2007 21:29:46 -0700
  • RE: Connections between timber batterns/purlins with concrete slab Tue, 11 Dec 2007 04:44:51 -0700

• ndz28
  • Re: ASCE 7-05 Sun, 28 Oct 2007 23:15:57 -0600
  • Los Angeles City 2007 building codes. Wed, 7 Nov 2007 12:23:06 -0700
  • Re: Santa Monica Seminar Sat, 15 Dec 2007 21:11:20 -0700

• Neil Moore
  • Re: SEISMIC: Seismic Factors for Qatar Mon, 1 Oct 2007 14:47:35 -0600
  • Re: Earthquake-Proof Design Fri, 2 Nov 2007 10:17:10 -0600
  • RE: Earthquake-Proof Design Fri, 2 Nov 2007 10:54:34 -0600
  • RE: footings look too big Fri, 2 Nov 2007 20:35:59 -0600
  • Re: Structural Engineering Spreadsheets - new Excel Version with XLSX! Tue, 6 Nov 2007 08:19:36 -0700
  • RE: Structural Engineering Spreadsheets - new Excel Version with XLSX! Tue, 6 Nov 2007 09:08:56 -0700
  • RE: Structural Engineering Spreadsheets - new Excel Version with XLSX! Tue, 6 Nov 2007 09:44:51 -0700
  • Re: Wind Uplift on Footings Tue, 20 Nov 2007 14:24:56 -0700
  • Re: ASCE 7-05 Wind Wed, 21 Nov 2007 16:30:44 -0700
  • RE: ASCE 7-05 Wind example Thu, 29 Nov 2007 09:42:20 -0700

• Nels Roselund
  • RE: BLACK BOX SUPPORTED STRUCTURE Sat, 24 Nov 2007 19:00:11 -0700
  • RE: Contec AAC Fri, 28 Dec 2007 16:26:36 -0700

• OSCAR HENRIQUEZ
  • Steel SMRF beam connection Wed, 21 Nov 2007 17:46:50 -0700
  • ASCE7-05 redundancy factor and wall design for Out-of-plane forces Thu, 13 Dec 2007 12:12:05 -0700

• Padmanabhan Rajendran
  • Foundation for large tanks Mon, 22 Oct 2007 15:40:26 -0600
  • Re: Great ASCE7 spreadsheet / ComboBoxes Sat, 8 Dec 2007 08:32:19 -0700
  • Re: Great ASCE7 spreadsheet / ComboBoxes Tue, 11 Dec 2007 12:17:59 -0700
  • Re: Profis Software was RE: Great ASCE7 spreadsheet / ComboBoxes Wed, 12 Dec 2007 10:51:23 -0700

• Paul Blomberg
  • Re: UBC 1630.8.2.2.1.7 Bracing Load Thu, 4 Oct 2007 12:21:41 -0600
  • Re: S1 and Ss by address Thu, 4 Oct 2007 12:28:46 -0600
  • Re: USGS Web address for determining IBC SDC and Base Shear Fri, 16 Nov 2007 10:06:53 -0700
  • Re: Santa Monica Seminar Mon, 17 Dec 2007 09:04:18 -0700
  • 2008 Los Angeles Building Code Wed, 26 Dec 2007 08:39:18 -0700
  • Re: 2008 Los Angeles Building Code Wed, 26 Dec 2007 16:33:47 -0700

• Paul Feather
  • RE: ADAPT or POSTEN ?? Sat, 17 Nov 2007 11:55:14 -0700
  • RE: Wind Speeds in California Wed, 21 Nov 2007 11:53:20 -0700
  • RE: Wide flange bearing connection Mon, 26 Nov 2007 16:49:09 -0700
  • RE: R value UBC97 Mon, 3 Dec 2007 12:36:52 -0700
  • RE: ASCE7-05 redundancy factor and wall design for Out-of-plane forces Thu, 13 Dec 2007 12:24:42 -0700
  • RE: jailbreak through CMU Tue, 18 Dec 2007 10:33:25 -0700

• Paul Ransom
  • Re: tilt-up + PEMB Wed, 3 Oct 2007 20:08:28 -0600
  • Re: Foundations for a 3-pinned arch stadium Mon, 8 Oct 2007 09:36:17 -0600
  • Re: Foundations for a 3-pinned arch stadium Tue, 9 Oct 2007 07:28:03 -0600
  • Re: UBC 1630.8.2.2.1.7 Bracing Load Wed, 10 Oct 2007 22:05:13 -0600
  • Re: Foundations for a 3-pinned arch stadium Thu, 11 Oct 2007 00:46:30 -0600
  • Re: Foundations for a 3-pinned arch stadium Thu, 11 Oct 2007 19:01:30 -0600
  • Re: ASCE 7-05 Sat, 20 Oct 2007 10:08:07 -0600
  • Re: Conventional Light Framed Construction ... an aside Tue, 23 Oct 2007 19:45:59 -0600
  • Re: OT- Scanners Sat, 3 Nov 2007 09:01:31 -0600
  • Re: footings look too big Sat, 3 Nov 2007 09:11:39 -0600
  • Re: printers/ wood software Sat, 3 Nov 2007 09:19:19 -0600
  • Re: seaint Digest for 2 Nov 2007 Sat, 3 Nov 2007 09:25:48 -0600
  • Re:MATHCAD: Anyone Else Not Getting the Warm 'n' Fuzzies from PTC? Thu, 8 Nov 2007 18:53:00 -0700
  • Re: HSS welds & HSS in general Sat, 1 Dec 2007 08:42:54 -0700

• Pinyon Engineering
  • Subject: Re: sustainable companies Thu, 15 Nov 2007 18:31:44 -0700
  • Subject: re: straw bale homes Fri, 16 Nov 2007 18:54:41 -0700

• raincat1
  • IBC Code Enforcement Mon, 17 Dec 2007 10:37:40 -0700

• Ralph Kratz
  • Re: Frost Line Wed, 24 Oct 2007 11:00:43 -0600
  • Re: ASCE 7-05 Wind Tue, 20 Nov 2007 21:31:52 -0700
  • Re: Contec AAC Fri, 28 Dec 2007 10:57:42 -0700
  • Re: Design Examples Fri, 28 Dec 2007 10:58:55 -0700

• Rand W Holtham
  • lifting preassemble structures Thu, 8 Nov 2007 06:15:01 -0700

• raymond shreenan
  • Re: Free 2007 CBC code seminars including the LA regional amendments Fri, 9 Nov 2007 15:44:13 -0700
  • Merry Christmas Mon, 24 Dec 2007 17:29:11 -0700

• refugio rochin
  • 8" COLUMNS Fri, 5 Oct 2007 08:32:55 -0600
  • 8" Columns Fri, 5 Oct 2007 08:35:14 -0600
  • Re: 8" Columns Fri, 5 Oct 2007 11:20:42 -0600
  • concrete drop panels Tue, 9 Oct 2007 07:54:42 -0600
  • Re: concrete drop panels Tue, 9 Oct 2007 09:05:08 -0600
  • Re: concrete drop panels Tue, 9 Oct 2007 14:44:55 -0600
  • Re: ASCE 7-05 Tue, 23 Oct 2007 09:25:29 -0600
  • 8" Columns Wed, 31 Oct 2007 08:21:26 -0600
  • Modeling and results Fri, 2 Nov 2007 14:04:47 -0600

• Reza Dashti Asl
  • RE: UBC 1630.8.2.2.1.7 Bracing Load Tue, 9 Oct 2007 14:23:13 -0600
  • RE: UBC 1630.8.2.2.1.7 Bracing Load Thu, 11 Oct 2007 20:09:15 -0600

• Rhkratzse
  • Re: Conventional Light Framed Construction Vs. Engineered Building [Another View] Mon, 22 Oct 2007 09:31:03 -0600
  • Re: Conventional Light Framed Construction Vs. Engineered Building  [Another View] Mon, 22 Oct 2007 09:55:33 -0600
  • Re: ASCE 7-05 Mon, 22 Oct 2007 10:11:33 -0600
  • Re: Conventional Light Framed Construction Vs. Engineered Building [Another View] Mon, 22 Oct 2007 11:13:14 -0600
  • Re: slabs on grade... Mon, 29 Oct 2007 10:00:19 -0600
  • Re: biofuels and further offfffff-topic Thu, 1 Nov 2007 14:07:20 -0600
  • Re: biofuels and further offfffff-topic Thu, 1 Nov 2007 14:28:27 -0600
  • Re: Earthquake-Proof Design Fri, 2 Nov 2007 10:04:07 -0600
  • Re: RE:OT- Scanners Fri, 2 Nov 2007 13:30:10 -0600
  • Re: Precast manhole design Fri, 2 Nov 2007 14:54:45 -0600
  • Re: question my authority???! (AKA Who is Eric Cartman?) Mon, 5 Nov 2007 20:26:26 -0700
  • Re: question my authority???! (AKA Who is Eric Cartman?) Mon, 5 Nov 2007 21:12:20 -0700
  • Re: Wind drift Wed, 7 Nov 2007 11:23:25 -0700
  • Re: Wind drift Wed, 7 Nov 2007 15:16:56 -0700
  • Re: MATHCAD: Anyone Else Not Getting the Warm 'n' Fuzzies from PTC? Wed, 7 Nov 2007 21:35:02 -0700
  • Re: Sustainable companies Mon, 12 Nov 2007 11:39:56 -0700
  • Snow load in Stowe VT? Thu, 15 Nov 2007 15:43:36 -0700
  • Re: underground house Thu, 29 Nov 2007 08:01:14 -0700
  • Re: underground house Thu, 29 Nov 2007 10:57:50 -0700
  • Re: underground house [gettin' pretty OT now] Thu, 29 Nov 2007 15:26:03 -0700
  • Re: Sloped Rafter Bearing Tue, 4 Dec 2007 10:27:27 -0700
  • Re: Sloped Rafter Bearing Tue, 4 Dec 2007 11:05:19 -0700
  • Re: sustainable companies Fri, 7 Dec 2007 14:04:45 -0700
  • Re: Removing yourself as EOR Wed, 12 Dec 2007 12:37:44 -0700
  • Re: IBC Code Enforcement Mon, 17 Dec 2007 11:33:50 -0700

• Rich Lewis
  • Transfer force of large tie beam Sun, 11 Nov 2007 21:14:59 -0700
  • Adding Storefront to Existing CMU Wall Tue, 13 Nov 2007 21:15:55 -0700
  • Circa 80's Walmart construction Tue, 13 Nov 2007 21:16:32 -0700
  • Tilt-Up Wall Submittal Review Thu, 13 Dec 2007 20:00:11 -0700
  • RE: wind load calc's progrm Tue, 25 Dec 2007 13:20:14 -0700

• Richard Hess
  • RE: FW: RE: technical References and Advice of CMU Wall Cracking Sat, 22 Dec 2007 11:12:28 -0700

• Richard L. Hess
  • RE: Foundation for large tanks Mon, 22 Oct 2007 19:15:22 -0600
  • RE: slabs on grade... Mon, 29 Oct 2007 14:07:03 -0600
  • RE: slabs on grade... Tue, 30 Oct 2007 11:02:44 -0600
  • RE: Frost footings - whats the big deal? Tue, 6 Nov 2007 19:25:57 -0700
  • RE: Subject: Re: sustainable companies Fri, 16 Nov 2007 12:52:28 -0700
  • RE: underground house Thu, 29 Nov 2007 14:59:54 -0700
  • RE: underground house [gettin' pretty OT now] Thu, 29 Nov 2007 19:07:41 -0700
  • RE: underground house Fri, 30 Nov 2007 14:50:49 -0700
  • RE: underground house Mon, 3 Dec 2007 12:46:57 -0700
  • RE: New and hopefully useful web site Thu, 13 Dec 2007 15:33:37 -0700
  • RE: technical References and Advice of CMU Wall Cracking Fri, 21 Dec 2007 14:32:49 -0700

• Rick
  • Revit Structural Thu, 15 Nov 2007 09:24:35 -0700
  • RE: Revit Structural Thu, 15 Nov 2007 10:24:17 -0700

• Rick Stone
  • RE: CAD files Wed, 24 Oct 2007 10:28:10 -0600

• Rob Randig
  • RE: Foundation for large tanks Tue, 23 Oct 2007 13:08:43 -0600

• Robert Jonkman
  • RE: DESIGN PROGRAMS FOR NEW CODE Wed, 31 Oct 2007 07:47:32 -0600
  • RE: Sustainable companies Sat, 10 Nov 2007 07:34:03 -0700

• Robert Kazanjy
  • Re: Strenth and Stiffness of 1x diagonal floor sheathing?? Tue, 2 Oct 2007 21:58:26 -0600
  • Re: Bill Polhemus, that was a cheap shot Thu, 1 Nov 2007 09:32:30 -0600
  • Re: Bill Polhemus, that was a cheap shot Thu, 1 Nov 2007 12:51:19 -0600
  • Re: question my authority???! (AKA Who is Eric Cartman?) Mon, 5 Nov 2007 20:37:30 -0700
  • Re: October Structural Engineer " Resisting Lateral Forces Cumulative overturning design" Tue, 6 Nov 2007 23:40:33 -0700
  • Re: question my authority???! (AKA Who is Eric Cartman?) Tue, 6 Nov 2007 23:41:24 -0700
  • Re: Wind tower design Sat, 24 Nov 2007 18:10:18 -0700
  • Re: Wind tower design Sun, 25 Nov 2007 21:24:08 -0700
  • Re: threaded rod couplers Thu, 29 Nov 2007 11:11:41 -0700

• Roger Davis
  • Re: Cantilevered Retaining Wall - Rule of Thumb Mon, 26 Nov 2007 09:24:01 -0700
  • Re: Cantilevered Retaining Wall - Rule of Thumb Mon, 26 Nov 2007 12:50:49 -0700
  • Re: Cantilevered Retaining Wall - Rule of Thumb Thu, 29 Nov 2007 08:48:37 -0700

• rowyz
  • Re: Expansive Foundation Fri, 12 Oct 2007 20:40:48 -0600
  • Re: Expansive Foundation Tue, 16 Oct 2007 15:00:34 -0600
  • Re: A3 Laser printers Sun, 4 Nov 2007 17:27:30 -0700

• Samiappan Srinivasan
  • Beam End Condition- When rests on Shear wall. Fri, 2 Nov 2007 22:47:19 -0600
  • Transfer Girder Design having more Depth Tue, 13 Nov 2007 23:53:00 -0700
  • Expansion Joint in Tunnel Mon, 19 Nov 2007 23:54:15 -0700

• Sandra Klinke
  • Job at The University of Sydney Wed, 24 Oct 2007 19:05:12 -0600

• Sanjay Verma
  • Good reference or explanatory notes/example on Seismic Load Calculation based on ASCE 7-05 for building as well as non building structures Wed, 3 Oct 2007 15:26:51 -0600
  • Choice between intermittent and continuous fillet weld in Crane girder ( I beam with channel top) Mon, 8 Oct 2007 11:00:55 -0600
  • Both face should have Shrinkage Steel in 12 inch thick Structural Slab (ACI318) Thu, 11 Oct 2007 12:03:28 -0600
  • RE: Both face should have Shrinkage Steel in 12 inch thick Structural Slab (ACI318) Thu, 11 Oct 2007 12:54:45 -0600
  • RE: Both face should have Shrinkage Steel in 12 inch thick Structural Slab (ACI318) Thu, 11 Oct 2007 17:03:16 -0600
  • Dynamic earth pressure increment in a Concrete box Structure 40 ft below grade Thu, 1 Nov 2007 15:26:01 -0600
  • Precast manhole design Fri, 2 Nov 2007 10:05:39 -0600

• Scott Maxwell
  • RE: S1 and Ss by address Thu, 4 Oct 2007 13:52:21 -0600
  • RE: 8" Columns Fri, 5 Oct 2007 13:16:01 -0600
  • RE: concrete drop panels Tue, 9 Oct 2007 14:31:25 -0600
  • Wood column with steel flitch plate Tue, 16 Oct 2007 01:25:45 -0600
  • RE: Wood column with steel flitch plate Tue, 16 Oct 2007 08:13:27 -0600
  • RE: 2006 IBC vs 2003 NEHRP Tue, 16 Oct 2007 15:42:20 -0600
  • RE: steel flitch plate Thu, 18 Oct 2007 02:50:37 -0600
  • Re: ASCE 7-05 Mon, 22 Oct 2007 17:06:02 -0600
  • Re: ASCE 7-05 Tue, 23 Oct 2007 13:59:31 -0600
  • RE: California PE/SE References Thu, 25 Oct 2007 19:28:20 -0600
  • RE: slabs on grade... Mon, 29 Oct 2007 11:11:52 -0600
  • RE: 64 bit computers systems Mon, 29 Oct 2007 13:48:27 -0600
  • RE: 64 bit computers systems Mon, 29 Oct 2007 16:26:35 -0600
  • RE: Anchor Shear Shear Capacity in Reinforced Concrete Mon, 29 Oct 2007 17:34:35 -0600
  • RE: DESIGN PROGRAMS FOR NEW CODE Tue, 30 Oct 2007 17:52:14 -0600
  • RE: Bill Polhemus, that was a cheap shot Thu, 1 Nov 2007 08:45:48 -0600
  • RE: Bill Polhemus, that was a cheap shot Thu, 1 Nov 2007 12:06:14 -0600
  • RE: Mathcad vs. Matlab Thu, 1 Nov 2007 13:31:09 -0600
  • RE: biofuels and further off-topic Thu, 1 Nov 2007 15:30:32 -0600
  • RE: biofuels and further off-topic Thu, 1 Nov 2007 18:52:26 -0600
  • RE: Wind drift Thu, 1 Nov 2007 18:55:55 -0600
  • RE: SE Practice Act Thu, 1 Nov 2007 21:43:28 -0600
  • RE: DESIGN PROGRAMS FOR NEW CODE Thu, 1 Nov 2007 21:44:57 -0600
  • RE: SE Practice Act Fri, 2 Nov 2007 09:23:58 -0600
  • RE: footings look too big Mon, 5 Nov 2007 15:24:20 -0700
  • RE: Wind drift Wed, 7 Nov 2007 14:50:50 -0700
  • RE: Wind drift Wed, 7 Nov 2007 16:31:54 -0700
  • Re: MATHCAD: Anyone Else Not Getting the Warm 'n' Fuzzies from PTC? Sun, 11 Nov 2007 21:42:28 -0700
  • Re: MATHCAD: Anyone Else Not Getting the Warm 'n' Fuzzies from PTC? Mon, 12 Nov 2007 04:27:59 -0700
  • Re: sustainable companies Mon, 12 Nov 2007 14:30:21 -0700
  • Re: Transfer Girder Design having more Depth Wed, 14 Nov 2007 08:18:41 -0700
  • RE: Revit Structural Sun, 18 Nov 2007 04:24:26 -0700
  • Re: Revit Structural Mon, 19 Nov 2007 18:53:28 -0700
  • RE: Responsiblity for local conditions Tue, 20 Nov 2007 22:04:15 -0700
  • RE: ASCE 7-05 Wind Tue, 20 Nov 2007 22:18:50 -0700
  • RE: Responsiblity for local conditions Wed, 21 Nov 2007 10:18:29 -0700
  • RE: ASCE 7-05 Wind Thu, 22 Nov 2007 10:00:01 -0700
  • RE: CA & WA SE reciprocity Sat, 24 Nov 2007 11:36:16 -0700
  • RE: CA & WA SE reciprocity Sat, 24 Nov 2007 19:57:03 -0700
  • RE: CA & WA SE reciprocity Mon, 26 Nov 2007 12:49:19 -0700
  • Re: CA Licensure Fri, 7 Dec 2007 01:52:52 -0700
  • Re: CBC 2007 Wind Load Tue, 18 Dec 2007 23:11:53 -0700
  • Re: CBC 2007 Wind Load Wed, 19 Dec 2007 06:46:45 -0700
  • RE: timber pedestrian bridge Thu, 20 Dec 2007 19:01:17 -0700
  • RE: CBC 2007 Wind Load Fri, 21 Dec 2007 16:45:48 -0700
  • RE: technical References and Advice of CMU Wall Cracking Fri, 21 Dec 2007 16:46:26 -0700
  • RE: FW: RE: technical References and Advice of CMU Wall Cracking Fri, 21 Dec 2007 23:34:16 -0700
  • RE: Design Examples Sat, 29 Dec 2007 10:13:59 -0700
  • RE: Contec AAC Sat, 29 Dec 2007 10:43:58 -0700
  • RE: Stability of highrise buildings for seismic loads Mon, 31 Dec 2007 23:41:54 -0700

• Scott, William N
  • RE: metal siding screwed to steel Wed, 3 Oct 2007 21:16:17 -0600
  • RE: Steel Shapes Booklet Thu, 11 Oct 2007 10:30:57 -0600
  • RE: ASCE 7-05 Mon, 22 Oct 2007 09:54:51 -0600
  • RE: ASCE 7-05 Tue, 23 Oct 2007 11:49:50 -0600
  • RE: ASCE 7-05 Tue, 23 Oct 2007 12:47:19 -0600
  • RE: CODE: Wind Loading at Lower Wind Speeds? Thu, 1 Nov 2007 11:02:51 -0600
  • RE: CA Licensure Fri, 7 Dec 2007 09:46:53 -0700
  • RE: Openings in concrete beams Sat, 8 Dec 2007 15:58:16 -0700
  • RE: Design of Pavement Section Thu, 20 Dec 2007 15:15:41 -0700
  • RE: Contec AAC Fri, 28 Dec 2007 11:00:35 -0700

• SE California
  • RE: 3D model with metal deck diaphragm Tue, 16 Oct 2007 09:49:49 -0600
  • SE books/references available Tue, 16 Oct 2007 10:13:13 -0600

• seaint04
  • Pre-Engr. Mtl Bldg. W/ Tilt-up Wall Mon, 1 Oct 2007 10:45:25 -0600
  • Re: Transfer force of large tie beam Mon, 12 Nov 2007 08:36:00 -0700
  • Re: Transfer force of large tie beam Mon, 12 Nov 2007 09:51:30 -0700
  • RE: Transfer force of large tie beam Mon, 12 Nov 2007 12:55:40 -0700

• Shaun Dustin
  • RE: TEDDS Software Mon, 22 Oct 2007 14:29:22 -0600
  • RE: 12 x 18 printers Tue, 30 Oct 2007 17:27:36 -0600
  • RE: 12 x 18 printers Tue, 30 Oct 2007 23:58:50 -0600
  • RE: Is ASCE desperate for cash flow? Wed, 31 Oct 2007 15:44:11 -0600
  • Bill Polhemus, that was a cheap shot Wed, 31 Oct 2007 22:21:12 -0600
  • Biofuels Thu, 1 Nov 2007 09:22:58 -0600
  • RE: Structural Engineering Spreadsheets Fri, 2 Nov 2007 10:28:04 -0600
  • RE: Earthquake-Proof Design Fri, 2 Nov 2007 11:39:19 -0600
  • RE: Structural Engineering Spreadsheets Mon, 5 Nov 2007 08:26:21 -0700
  • RE: Sustainable companies Mon, 12 Nov 2007 10:56:50 -0700
  • RE: MODELING: Accounting for a 'Black Box' Supported Structure Sat, 24 Nov 2007 22:27:48 -0700
  • RE: Steel SMRF beam connection Sat, 24 Nov 2007 22:37:33 -0700
  • RE: Steel SMRF beam connection Sun, 25 Nov 2007 21:21:00 -0700

• Sheila Wray
  • I am unavailable to respond to your email. If you need immediate assistance or would like Tue, 23 Oct 2007 14:42:22 -0600
  • I am unavailable to respond to your email. If you need immediate assistance or would like Tue, 23 Oct 2007 14:54:36 -0600
  • I am unavailable to respond to your email. If you need immediate assistance or would like Tue, 23 Oct 2007 15:18:52 -0600
  • I am unavailable to respond to your email. If you need immediate assistance or would like Tue, 23 Oct 2007 15:53:20 -0600
  • I am unavailable to respond to your email. If you need immediate assistance or would like Tue, 23 Oct 2007 15:53:47 -0600
  • I am unavailable to respond to your email. If you need immediate assistance or would like Tue, 23 Oct 2007 19:47:12 -0600

• Shiraz Shahid
  • A3 Laser printers Sun, 4 Nov 2007 09:46:57 -0700
  • RE: A3 Laser printers Mon, 5 Nov 2007 11:11:44 -0700

• smaxwell
  • RE: ASCE 7-05 Mon, 22 Oct 2007 16:34:02 -0600
  • RE: ASCE 7-05 Mon, 22 Oct 2007 16:35:16 -0600

• sscholl2(--nospam--at)juno.com
  • Re: Is ASCE desperate for cash flow? Wed, 7 Nov 2007 21:13:57 -0700
  • Re: Strawbale engineering (was: sust. engr) Sun, 18 Nov 2007 19:13:52 -0700
  • Re: Responsiblity for local conditions Tue, 20 Nov 2007 21:45:00 -0700
  • Re: Strawbale engineering Tue, 20 Nov 2007 22:01:53 -0700
  • Re: Responsiblity for local conditions Sun, 25 Nov 2007 20:47:31 -0700
  • RE: underground house Sun, 2 Dec 2007 21:08:18 -0700
  • Re: Boring through GLBs Sun, 9 Dec 2007 15:54:17 -0700
  • Re: Design of Pavement Section Thu, 20 Dec 2007 23:37:46 -0700
  • RE: FW: RE: technical References and Advice of CMU Wall Cracking Sat, 22 Dec 2007 12:43:54 -0700

• Stan Caldwell
  • ADAPT or POSTEN ?? Fri, 16 Nov 2007 16:27:28 -0700
  • Shamefully Off-Topic: Carbon Christmas Fri, 14 Dec 2007 11:12:52 -0700

• Steve Gordin
  • Re: California PE/SE References Thu, 25 Oct 2007 11:05:07 -0600
  • Re: Earthquake-Proof Design Fri, 2 Nov 2007 11:47:57 -0600
  • Re: Free 2007 CBC code seminars including the LA regional amendments Tue, 13 Nov 2007 11:17:26 -0700
  • Re: Wind Uplift on Footings Tue, 20 Nov 2007 14:23:53 -0700
  • Santa Monica Seminar Sat, 15 Dec 2007 06:37:18 -0700

• Steve Mallett
  • Freezer Building Roof Snow Load Wed, 28 Nov 2007 07:41:36 -0700

• SThreewitt
  • Scott Threewitt is out of the office. Sat, 22 Dec 2007 03:02:04 -0700

• Stuart, Matthew
  • RE: 3D model with metal deck diaphragm Tue, 16 Oct 2007 10:05:53 -0600
  • Tongue & Groove Deck Diaphragm Capacities using horizontal Steel Spikes Wed, 17 Oct 2007 06:28:39 -0600
  • RE: Wide flange bearing connection Mon, 26 Nov 2007 17:16:00 -0700
  • RE: Freezer Building Roof Snow Load Wed, 28 Nov 2007 08:02:28 -0700
  • RE: Openings in concrete beams Fri, 7 Dec 2007 13:09:41 -0700
  • Bethlehem Steel Building Case Histories Wed, 12 Dec 2007 07:40:51 -0700
  • FW: Bethlehem Steel Building Case Histories Wed, 12 Dec 2007 08:02:37 -0700
  • RE: Bethlehem Steel Building Case Histories Mon, 17 Dec 2007 06:28:39 -0700
  • RE: Basic Roof Diaph. Question Mon, 17 Dec 2007 15:57:45 -0700
  • RE: Snow drift Tue, 18 Dec 2007 09:21:13 -0700

• Sunil Thengale
  • RE: Building codes in Dubai, UAE Mon, 1 Oct 2007 01:45:55 -0600

• Sushil Chauhan
  • CA & WA SE reciprocity Fri, 23 Nov 2007 07:50:51 -0700

• sutej
  • OOP Wall Anchorage - min. size of wood framing member Mon, 26 Nov 2007 13:46:12 -0700

• t.w.allen
  • RE: CAD: AutoCAD Revit Structure Suite 2008 Wed, 17 Oct 2007 12:26:18 -0600

• Tarek Mokhtar
  • Re: QUESTION REGARDING GLB REINFORCING? Thu, 15 Nov 2007 14:34:23 -0700

• Thor Matteson
  • Re: Uplift on Roof Sheathing - "Pull Through" Resistance Thu, 13 Dec 2007 23:11:42 -0700

• Thor Matteson, SE
  • Re: Strawbale engineering Tue, 20 Nov 2007 11:14:09 -0700

• Thor Tandy
  • Kama Modular Systems Wed, 24 Oct 2007 11:17:40 -0600
  • RE: Why are my messages showing up twice? Sun, 25 Nov 2007 18:58:13 -0700
  • RE: Address to Lat/Long Converter Thu, 20 Dec 2007 12:23:07 -0700

• Tom . Hunt
  • RE: Pre-Engr. Mtl Bldg. W/ Tilt-up Wall Mon, 1 Oct 2007 13:52:52 -0600
  • Stresscore Tue, 2 Oct 2007 12:04:41 -0600
  • Re: Good reference or explanatory notes/example on Seismic Load Calculation based on ASCE 7-05 for building as well as non building structures Wed, 3 Oct 2007 15:39:23 -0600
  • Re: Choice between intermittent and continuous fillet weld in Crane girder ( I beam with channel top) Mon, 8 Oct 2007 11:21:39 -0600
  • Re: Steel Shapes Booklet Tue, 9 Oct 2007 07:57:17 -0600
  • RE: 2006 IBC vs 2003 NEHRP Tue, 16 Oct 2007 15:58:27 -0600
  • Try to archive SEAINT mail at Google Groups Thu, 25 Oct 2007 07:50:52 -0600
  • Re: Try to archive SEAINT mail at Google Groups Thu, 25 Oct 2007 07:51:27 -0600
  • RE: Pre-Engr. Mtl Bldg. W/ Tilt-up Wall Thu, 25 Oct 2007 07:53:42 -0600
  • Re: Anchor Shear Shear Capacity in Reinforced Concrete Mon, 29 Oct 2007 15:26:48 -0600
  • Fw: Anchor Shear Shear Capacity in Reinforced Concrete Mon, 29 Oct 2007 16:31:44 -0600
  • RE: AISC Seismic Provisions Tue, 30 Oct 2007 17:15:28 -0600
  • Re: 8" Columns Wed, 31 Oct 2007 08:38:07 -0600
  • Re: AISC Prequalified Connection Provisions Wed, 31 Oct 2007 09:26:15 -0600
  • RE: AISC Prequalified Connection Provisions Wed, 31 Oct 2007 10:25:28 -0600
  • Re: Earthquake-Proof Design Fri, 2 Nov 2007 11:12:43 -0600
  • RE: Earthquake-Proof Design Fri, 2 Nov 2007 14:45:00 -0600
  • Re: California Building Code and the 2006 IBC Tue, 6 Nov 2007 15:39:17 -0700
  • Re: lifting preassemble structures Thu, 8 Nov 2007 08:18:48 -0700
  • Free 2007 CBC code seminars including the LA regional amendments Mon, 12 Nov 2007 08:27:53 -0700
  • RE: Free 2007 CBC code seminars including the LA regional amendments Mon, 12 Nov 2007 10:45:16 -0700
  • RE: Fire Rated Assembly Consultants >> One Hour Floor / Ceiling Assembly UL - G525 & G531 Thu, 15 Nov 2007 13:21:48 -0700
  • Concrete seminar in southern California Wed, 28 Nov 2007 17:16:16 -0700
  • Re: threaded rod couplers Thu, 29 Nov 2007 10:44:45 -0700
  • Re: weld symbols Thu, 29 Nov 2007 12:04:48 -0700
  • Elongation of ASTM A496 Mon, 3 Dec 2007 12:46:26 -0700
  • RE: Great ASCE7 spreadsheet Mon, 3 Dec 2007 14:09:11 -0700
  • RE: Santa Monica Seminar Tue, 18 Dec 2007 13:40:36 -0700
  • Re: Design of Pavement Section Thu, 20 Dec 2007 15:00:59 -0700
  • Re: Fundamental period of tanks Thu, 27 Dec 2007 13:44:43 -0700
  • RE: Fundamental period of tanks Fri, 28 Dec 2007 12:20:49 -0700

• Tom Skaggs
  • RE: IBC Conventional Light Framed Construction Wed, 17 Oct 2007 08:53:52 -0600
  • RE: IBC Conventional Light Framed Construction Wed, 17 Oct 2007 11:47:16 -0600
  • RE: SE Practice Act Fri, 2 Nov 2007 11:23:40 -0600
  • RE: Structural Engineering Spreadsheets - new Excel Version with XLSX! Tue, 6 Nov 2007 08:36:21 -0700
  • RE: Uplift on Roof Sheathing - "Pull Through" Resistance Wed, 12 Dec 2007 11:37:39 -0700

• Trib K Mittra
  • Re: Try to archive SEAINT mail at Google Groups Thu, 25 Oct 2007 13:30:57 -0600
  • Elongation of ASTM A496 Tue, 4 Dec 2007 09:50:02 -0700
  • Free 2007 CBC code seminars including the LA regional amendments Tue, 4 Dec 2007 10:09:48 -0700

• Truitt Vance
  • RE: 64 bit computers systems Wed, 31 Oct 2007 09:21:08 -0600
  • RE: Bill Polhemus, that was a cheap shot Thu, 1 Nov 2007 11:46:29 -0600
  • PEMB foundation uplift Wed, 21 Nov 2007 18:26:56 -0700
  • RE: Perforated shear walls Thu, 6 Dec 2007 18:10:52 -0700

• Wesley Werner
  • RE: UBC 1630.8.2.2.1.7 Bracing Load Thu, 4 Oct 2007 06:06:47 -0600
  • RE: Structural Engineering Spreadsheets - new Excel Version with XLSX! Tue, 6 Nov 2007 09:20:42 -0700
  • RE: Great ASCE7 spreadsheet Mon, 3 Dec 2007 13:25:36 -0700
  • RE: EnerCalc 6 Mon, 3 Dec 2007 15:24:14 -0700
  • Snow drift Tue, 18 Dec 2007 08:04:20 -0700
  • RE: Snow drift Tue, 18 Dec 2007 09:32:57 -0700
  • RE: EnerCalc 6 Wed, 19 Dec 2007 06:13:15 -0700

• William.Sherman
  • RE: Choice between intermittent and continuous fillet weld in Crane girder( I beam with channel top) Mon, 8 Oct 2007 11:52:54 -0600
  • 3D model with metal deck diaphragm Mon, 8 Oct 2007 13:28:38 -0600
  • RE: Mathcad Fri, 2 Nov 2007 09:49:18 -0600
  • RE: Mathcad Fri, 2 Nov 2007 13:04:53 -0600

• WISH DENNIS
  • USGS Web address for determining IBC SDC and Base Shear Tue, 13 Nov 2007 21:29:26 -0700
  • Re: USGS Web address for determining IBC SDC and Base Shear Thu, 15 Nov 2007 20:53:03 -0700
  • SEAW's Handbook of a Rapid-Solutions Methodology for Wind Design Tue, 20 Nov 2007 15:47:57 -0700
  • Strap and Tie-Down Systems Part 2 by Alfred Commins Tue, 20 Nov 2007 16:01:41 -0700
  • Embarrassingly dumb question Tue, 20 Nov 2007 18:51:32 -0700
  • Re: Wind Uplift on Footings Tue, 20 Nov 2007 18:54:40 -0700
  • Re: Embarrassingly dumb question Tue, 20 Nov 2007 19:59:39 -0700
  • Re: ASCE 7-05 Wind Tue, 20 Nov 2007 20:51:16 -0700
  • Re: ASCE 7-05 Wind Tue, 20 Nov 2007 20:52:17 -0700
  • Responsiblity for local conditions Tue, 20 Nov 2007 21:07:17 -0700
  • Re: Responsiblity for local conditions Wed, 21 Nov 2007 13:49:20 -0700
  • Re: Responsiblity for local conditions Wed, 21 Nov 2007 14:34:34 -0700
  • Re: Responsiblity for local conditions Wed, 21 Nov 2007 14:42:57 -0700
  • Re: ASCE 7-05 Wind Wed, 21 Nov 2007 14:55:41 -0700
  • Re: ASCE 7-05 Wind Wed, 21 Nov 2007 18:00:04 -0700
  • Re: OOP Wall Anchorage - min. size of wood framing member Mon, 26 Nov 2007 15:18:22 -0700
  • Staggered Plywood roof sheathing Wed, 5 Dec 2007 16:42:07 -0700
  • Live and Dead Load Spreadsheet Fri, 7 Dec 2007 22:50:58 -0700

• Wontae Kim
  • Shear Connector Design in Precast Sandwich Panel. Thu, 18 Oct 2007 06:57:06 -0600
  • Why 0.2 and 1 sec for Ss and S1? Wed, 5 Dec 2007 06:02:36 -0700

• Yi Yang
  • IBC06 / CBC07 Stone veneer on metal studs Mon, 22 Oct 2007 18:41:23 -0600
  • RE: IBC06 / CBC07 Stone veneer on metal studs Mon, 29 Oct 2007 10:10:34 -0600
  • EnerCalc 6 Mon, 3 Dec 2007 15:11:13 -0700
  • RE: Santa Monica Seminar Mon, 17 Dec 2007 18:07:27 -0700

• ZhangMichael
  • RE: seaint Digest for 30 Sep 2007 Mon, 1 Oct 2007 07:32:35 -0600

---

Mail converted by MHonArc