SEAINT

 

INTRO

 

SEARCH
ARCHIVE

 

NEED
A BOOK?

 

2010
Jan-Mar
Apr-Jun
Jul-Sep

 

2009
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2008
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2007
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2006
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2005
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2004
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2003
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2002
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

2001
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

2000
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

1999
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

 

1998
Jan-Mar
Apr-Jun
Jul-Sep
Oct-Dec

1997
Jan-Jun
Jul-Sep
Oct-Dec

1996
Jan-Jun
Jul-Dec

 

1995
Jul-Dec

 

HOME

Some recommendations...
 
 

 
 

---

SEAINT Mail Archive 2009 (Jan-Mar)

Civil and Structural Engineering discussions by author

www.seaintarchive.org

• About this archive / Index
• Messages sorted by: [Thread] [Subject] [Date]

Site Search: Need a book? Civil and Structural Engineering book recommendations...
 

---

Messages: 929

• Ing. Benjamín Arcos Reyes
  • Codes comparison Wed, 4 Feb 2009 16:41:34 -0700
  • Re: Codes comparison Thu, 5 Feb 2009 15:02:54 -0700
  • Re: Frictin to Resist Seismic Forces Fri, 13 Mar 2009 12:48:33 -0600

• cairo briceño
  • Angles Tue, 3 Feb 2009 17:30:48 -0700

• Abolhassan Astaneh-Asl
  • Re: Steel connection design Fri, 20 Feb 2009 12:36:39 -0700
  • Design of Double Angle Shear Connection for Extreme Ductility Fri, 20 Feb 2009 19:22:11 -0700
  • Blast Protection: Army Manual 5-1300 is now on the web Tue, 24 Feb 2009 17:36:51 -0700

• Acharya, Suresh
  • RE: curved beams Wed, 14 Jan 2009 09:56:49 -0700
  • RE: Lateral Stability of a Box Beam ? Thu, 15 Jan 2009 12:32:55 -0700
  • RE: SIPS in Seismic Design Category D, E ,F Fri, 23 Jan 2009 16:39:53 -0700
  • RE: Subgrade Modulus for Mat Foundations Thu, 29 Jan 2009 13:04:55 -0700
  • RE: Does George Housner deserve better? Tue, 3 Feb 2009 11:28:25 -0700
  • RE: "Single Angle" Combined Torsion & Bi-Axial Bending (repost) Tue, 3 Feb 2009 16:35:22 -0700
  • RE: Saw Cut joints in concrete walls Wed, 11 Feb 2009 12:22:19 -0700
  • RE: Ventilate stud spaces in earthquake retrofits? Wed, 18 Feb 2009 19:03:25 -0700
  • RE: ASCE 7-05: RSA Procedure per 12.9 Fri, 20 Feb 2009 09:49:32 -0700
  • RE: ASCE 7-05: RSA Procedure per 12.9 Fri, 20 Feb 2009 12:23:43 -0700
  • RE: History of Seaint List Tue, 24 Mar 2009 17:50:10 -0600
  • RE: CHINESE STEEL Tue, 31 Mar 2009 15:51:40 -0600

• Adair, Joel
  • RE: DOS to Windows Printing Problem Fri, 13 Feb 2009 12:31:29 -0700
  • RE: Plotting pdf Fri, 13 Feb 2009 14:51:16 -0700
  • Welding Through Metal Roof Deck Mon, 2 Mar 2009 12:04:58 -0700
  • RE: Green Point Rated Concrete Fri, 13 Mar 2009 11:38:49 -0600

• Alex Nacionales
  • RE: Swimming Pools Fri, 30 Jan 2009 12:53:55 -0700
  • RE: Facing mistakes in structural design Fri, 30 Jan 2009 19:20:46 -0700
  • RE: Vertical joint in Matt (raft) foundation Fri, 27 Mar 2009 19:07:04 -0600

• Alexander Bausk
  • Archive (WAS: Swimming Pools) Thu, 29 Jan 2009 21:28:36 -0700
  • Re: FACI Title? Fri, 27 Feb 2009 05:56:28 -0700
  • Re: FACI Title? Fri, 27 Feb 2009 06:06:12 -0700
  • Re: IT question Mon, 2 Mar 2009 15:27:51 -0700
  • Re: IT question Tue, 3 Mar 2009 01:59:46 -0700
  • Direct Analysis Method Thu, 5 Mar 2009 12:16:19 -0700
  • Re: History of Seaint List Tue, 24 Mar 2009 16:32:22 -0600

• Anantha Narayan
  • Re: Shear Flow AISC 13th Ed Mon, 26 Jan 2009 14:45:45 -0700
  • Re: 11 x 17 Printers Sat, 14 Mar 2009 06:23:53 -0600

• Andrew Kester
  • re: thin concrete overlay Mon, 16 Mar 2009 06:46:07 -0600
  • Re: thin concrete overlay Mon, 16 Mar 2009 06:49:56 -0600
  • re: history of the seaint list Sun, 22 Mar 2009 09:55:18 -0600
  • re: history of the list Wed, 25 Mar 2009 07:32:31 -0600
  • re: joist seat height Thu, 26 Mar 2009 06:40:47 -0600
  • re: joist seats Fri, 27 Mar 2009 12:06:32 -0600

• Andrew Kester, P.E.
  • lightweight concrete topping on wood Tue, 13 Jan 2009 18:14:32 -0700
  • re: multiple subjects Fri, 16 Jan 2009 12:34:25 -0700
  • tensile pull-through Mon, 19 Jan 2009 15:39:24 -0700

• Andrew Kester, PE
  • Expert Witness Course Wed, 7 Jan 2009 08:31:11 -0700
  • RE: custom joists Tue, 13 Jan 2009 07:56:12 -0700
  • re: curved channel Wed, 14 Jan 2009 08:20:20 -0700
  • re: Citi Corps Fri, 30 Jan 2009 08:39:07 -0700
  • re: thor's pool Sat, 31 Jan 2009 10:43:06 -0700

• Andy Heigley
  • Re: FW: Wind loads: ASD or Strength? Tue, 17 Feb 2009 12:14:47 -0700

• arturo martinez
  • Load test on piles Tue, 3 Feb 2009 15:30:16 -0700

• Arun Kumar
  • Conversion of Excel to Word Tue, 10 Feb 2009 23:36:40 -0700
  • RE: Conversion of Excel to Word Wed, 11 Feb 2009 21:08:17 -0700

• Ashwin Ranga Swamy
  • Re: Valley Rafters Sun, 8 Feb 2009 20:59:39 -0700

• ASLCSE
  • CBO Contact Wed, 14 Jan 2009 18:09:38 -0700
  • Re: CBO Contact Fri, 16 Jan 2009 11:17:37 -0700
  • Re: Remove from list Sat, 21 Feb 2009 10:16:16 -0700
  • Re: Structural Expert Series Software Library Thu, 19 Mar 2009 18:29:58 -0600

• AWC Info
  • Adjustment Factors Cd for timber column Fri, 6 Feb 2009 06:52:39 -0700
  • Re: FW: Wind loads: ASD or Strength? Wed, 18 Feb 2009 09:18:51 -0700

• bill
  • ASCE 7-05: RSA Procedure per 12.9 Thu, 19 Feb 2009 16:22:38 -0700
  • Re: Active Seismic Masses Thu, 19 Feb 2009 16:24:02 -0700
  • Re: ASCE 7-05: RSA Procedure per 12.9 Fri, 20 Feb 2009 07:17:27 -0700
  • Re: ASCE 7-05: RSA Procedure per 12.9 Fri, 20 Feb 2009 07:19:43 -0700
  • ASCE 7-05: Direction of Loading (12.5) Fri, 20 Feb 2009 09:24:40 -0700
  • Re: ASCE 7-05: Direction of Loading (12.5) Fri, 20 Feb 2009 11:37:56 -0700
  • Re: ASCE 7-05: RSA Procedure per 12.9 Fri, 20 Feb 2009 12:02:03 -0700
  • Re: ASCE 7-05: RSA Procedure per 12.9 Fri, 20 Feb 2009 12:05:36 -0700
  • Re: Wind loads: ASD or Strength? Sat, 21 Feb 2009 09:36:29 -0700
  • RE: Structural Steel Price - NEW IMPROVED PROCESS! Tue, 24 Feb 2009 16:54:33 -0700
  • ASCE 7-05: Ice Loads Due To Freezing Rain (Chapter 10) Tue, 24 Feb 2009 17:19:16 -0700
  • RE: some code issues Mon, 2 Mar 2009 15:00:10 -0700
  • ASCE 7 Wind Loads on Bare Steel Framing - Opinions Wanted Wed, 4 Mar 2009 07:07:52 -0700
  • RISA and Direct Analysis Method Wed, 4 Mar 2009 09:59:31 -0700
  • CHINESE STEEL Tue, 31 Mar 2009 08:23:26 -0600
  • Re: California SE question: Essential facilities - cans and pins Tue, 31 Mar 2009 08:24:11 -0600
  • Re: CHINESE STEEL Tue, 31 Mar 2009 09:35:18 -0600
  • Re: CHINESE STEEL Tue, 31 Mar 2009 12:01:46 -0600

• Bill Allen
  • RE: Paying for clarification Thu, 8 Jan 2009 11:46:09 -0700
  • RE: Paying for clarification Thu, 8 Jan 2009 22:41:11 -0700
  • Is it just me? Fri, 9 Jan 2009 17:10:10 -0700
  • RE: Is it just me? Sat, 10 Jan 2009 07:50:34 -0700
  • RE: Is it just me? Mon, 12 Jan 2009 10:52:27 -0700
  • RE: Is it just me? Tue, 13 Jan 2009 07:20:03 -0700
  • RE: lightweight concrete topping on wood Tue, 13 Jan 2009 20:56:46 -0700
  • Lateral Stability of a Box Beam ? Thu, 15 Jan 2009 11:51:26 -0700
  • IBC Section 1908.1.16 is a bugger Fri, 30 Jan 2009 11:30:49 -0700
  • RE: IBC Section 1908.1.16 is a bugger Fri, 30 Jan 2009 12:17:00 -0700
  • RE: Opportunities in Texas for Structural Engineers Fri, 6 Feb 2009 16:10:24 -0700
  • RE: Opportunities in Texas for Structural Engineers Fri, 6 Feb 2009 16:11:31 -0700
  • FEM Add-In for Excel Sat, 7 Feb 2009 12:02:08 -0700
  • RE: Plotting pdf Sat, 7 Feb 2009 18:10:06 -0700
  • RE: Diaphragm and Framed Dormers Sun, 8 Feb 2009 17:59:06 -0700
  • RE: Scott & Joe in Recovery after Kidney Transplant Thu, 12 Feb 2009 10:36:59 -0700
  • ASCE 7 Section 12.2.5.6 Thu, 19 Feb 2009 10:35:05 -0700
  • RE: ASCE 7 Section 12.2.5.6 Thu, 19 Feb 2009 12:08:21 -0700
  • RE: ASCE 7 Section 12.2.5.6 Thu, 19 Feb 2009 12:45:07 -0700
  • 2005 Aluminum Design Manual Tue, 24 Feb 2009 16:00:35 -0700
  • RE: Post-Installed Threaded Insert Wed, 11 Mar 2009 10:46:40 -0600
  • RE: Cold-formed corrugated Tue, 17 Mar 2009 13:47:18 -0600
  • RE: Cold-formed corrugated Tue, 17 Mar 2009 17:48:56 -0600
  • Rigid vs. Semi-Rigid Joint Wed, 18 Mar 2009 10:17:58 -0600
  • RE: History of Seaint List Tue, 24 Mar 2009 08:24:29 -0600
  • RE: History of Seaint List Tue, 24 Mar 2009 09:18:26 -0600
  • RE: California SE question: Essential facilities - cans and pins Tue, 31 Mar 2009 11:06:57 -0600

• Bill Cain
  • RE: wood glue Wed, 7 Jan 2009 10:59:34 -0700
  • RE: Is it just me? Sun, 11 Jan 2009 21:45:29 -0700
  • RE: Tax Day Today Thu, 15 Jan 2009 18:08:47 -0700
  • RE: History of Seaint List Tue, 24 Mar 2009 21:32:34 -0600
  • RE: CHINESE STEEL Tue, 31 Mar 2009 17:54:40 -0600

• Bill Polhemus
  • Vibration Acceptance Criteria Tue, 13 Jan 2009 08:44:59 -0700
  • Re: White Male Professionals Sat, 24 Jan 2009 08:32:20 -0700
  • Swapping Beam Nodes in RISA Mon, 9 Feb 2009 17:02:33 -0700
  • Re: Swapping Beam Nodes in RISA Mon, 9 Feb 2009 19:25:12 -0700
  • Re: Swap I-J in RISA Tue, 10 Feb 2009 15:32:38 -0700
  • Response Characteristics of PR Connection Sat, 14 Feb 2009 16:57:05 -0700
  • Re: Sat, 14 Feb 2009 18:06:01 -0700
  • Active Seismic Masses Thu, 19 Feb 2009 10:34:16 -0700
  • Re: Remove from list Fri, 20 Feb 2009 19:18:10 -0700
  • IBC 2006 - SEISMIC DESIGN OF STEEL - 2205.2.2 Fri, 20 Feb 2009 20:14:57 -0700
  • Re: FW: Wind loads: ASD or Strength? Fri, 20 Feb 2009 20:25:24 -0700
  • Re: Wind loads: ASD or Strength? Fri, 20 Feb 2009 20:28:12 -0700
  • Re: Wind loads: ASD or Strength? Fri, 20 Feb 2009 20:29:50 -0700
  • Re: Wind forces Fri, 20 Feb 2009 20:44:12 -0700
  • Re: Remove from list Sat, 21 Feb 2009 07:17:12 -0700
  • Re: IBC 2006 - SEISMIC DESIGN OF STEEL - 2205.2.2 Sat, 21 Feb 2009 07:19:08 -0700
  • Re: Remove from list Sun, 22 Feb 2009 10:31:28 -0700
  • Re: Remove from list Sun, 22 Feb 2009 17:32:58 -0700
  • Re: ASCE 7-05: Ice Loads Due To Freezing Rain (Chapter 10) Tue, 24 Feb 2009 18:50:21 -0700
  • Re: Structural Steel Price - NEW IMPROVED PROCESS! Tue, 24 Feb 2009 18:52:03 -0700
  • Re: ASCE-7 Ice Loads Wed, 25 Feb 2009 11:01:33 -0700
  • Re: Remove from list Thu, 26 Feb 2009 05:27:38 -0700
  • Re: ASCE-7 Ice Loads Sun, 1 Mar 2009 16:18:31 -0700
  • Re: ASCE 7-05: Ice Loads Due To Freezing Rain (Chapter 10) Sun, 1 Mar 2009 16:19:07 -0700
  • Re: ASCE 7 Wind Loads on Bare Steel Framing - Opinions Wanted Thu, 5 Mar 2009 08:23:42 -0700
  • Re: History of Seaint List Fri, 20 Mar 2009 18:17:10 -0600
  • Re: History of Seaint List Sat, 21 Mar 2009 18:18:34 -0600
  • Re: History of Seaint List Tue, 24 Mar 2009 17:16:15 -0600
  • Re: History of Seaint List Tue, 24 Mar 2009 17:28:21 -0600
  • Re: History of Seaint List Wed, 25 Mar 2009 14:43:28 -0600

• Bob Fennema
  • Re: Expert Witness Course Wed, 7 Jan 2009 17:10:26 -0700

• Brian Gerving
  • RE: Wind Load Topographic Effects Mon, 5 Jan 2009 14:06:56 -0700
  • RE: Post-Installed Threaded Insert Wed, 11 Mar 2009 11:11:31 -0600

• Brian McDonald
  • RE: Catenary Wed, 14 Jan 2009 16:00:40 -0700

• Buck Huckelson
  • Good list of concrete and foundation books on ebay --- FYI Sun, 11 Jan 2009 21:45:43 -0700

• Bulent Hatipoglu
  • Re: System Test for Post tensioning Tue, 3 Mar 2009 04:04:12 -0700

• Casey K. Hemmatyar
  • RE: CBO Contact Thu, 15 Jan 2009 08:56:10 -0700
  • Combined Torsion & Bi-Axial Bending on "Single Angle" Mon, 2 Feb 2009 18:25:39 -0700
  • Re: "Single Angle" Combined Torsion & Bi-Axial Bending (repost) Tue, 3 Feb 2009 16:02:57 -0700
  • Re: Torsion & Bi-Axial bending on Single Angle Thu, 5 Feb 2009 13:36:08 -0700
  • Re: History of Seaint List Tue, 24 Mar 2009 15:50:58 -0600

• christopher . banbury
  • Plotting pdf Sun, 8 Feb 2009 13:52:52 -0700
  • FL PE renewal Fri, 27 Feb 2009 08:28:10 -0700

• Christopher Banbury
  • print to PDF Mon, 9 Feb 2009 07:55:22 -0700

• Christopher Wright
  • Re: new job web site Tue, 6 Jan 2009 10:33:05 -0700
  • Re: Facing mistakes in structural design (a fantasy) Thu, 29 Jan 2009 19:42:28 -0700
  • Re: Facing mistakes in structural design Thu, 29 Jan 2009 19:42:28 -0700
  • Re: Facing mistakes in structural design (a fantasy) Fri, 30 Jan 2009 10:26:42 -0700
  • Re: FEM Add-In for Excel Sat, 7 Feb 2009 12:14:55 -0700
  • Re: Conversion of Excel to Word Wed, 11 Feb 2009 09:42:51 -0700
  • Re: Structural Steel Price Tue, 24 Feb 2009 17:37:31 -0700
  • Florida License Renewal Thu, 26 Feb 2009 14:30:09 -0700
  • Re: Florida License Renewal Thu, 26 Feb 2009 22:54:15 -0700
  • Re: FL PE renewal Fri, 27 Feb 2009 09:29:27 -0700
  • Re: Florida License Renewal Fri, 27 Feb 2009 09:40:20 -0700
  • Re: Florida License Renewal Sat, 28 Feb 2009 09:06:34 -0700
  • Re: Point supported glass design Thu, 12 Mar 2009 10:50:29 -0600
  • Re: Point supported glass design Thu, 12 Mar 2009 18:14:42 -0600
  • Re: Point supported glass design Thu, 12 Mar 2009 22:57:40 -0600
  • Re: History of Seaint List Tue, 24 Mar 2009 15:27:35 -0600

• Chuck Utzman
  • Re: IT question Mon, 16 Mar 2009 21:54:28 -0600
  • Re: History of Seaint List Tue, 24 Mar 2009 12:07:53 -0600

• coengineer
  • Re: IBC Section 1908.1.16 is a bugger Fri, 30 Jan 2009 13:08:31 -0700

• Conrad Harrison
  • Re: Wind Load Topographic Effects Thu, 1 Jan 2009 21:35:07 -0700
  • Re: Wind Load Topographic Effects Thu, 1 Jan 2009 22:04:58 -0700
  • RE: Wind Load Topographic Effects Thu, 1 Jan 2009 22:19:21 -0700
  • Re: C & C vs MWFRS Thu, 1 Jan 2009 23:27:31 -0700
  • RE: Wind Load Topographic Effects Fri, 2 Jan 2009 00:06:44 -0700
  • RE: Long-span PVC Tent (Conical) Sun, 4 Jan 2009 19:53:07 -0700
  • Wind Direction : Was Wind Load Topographic Effects Mon, 5 Jan 2009 18:59:51 -0700
  • RE: component and cladding vs MWFRS : A curious dependence of ASCE7-05 on AS1170.2 ? Mon, 5 Jan 2009 23:03:04 -0700
  • RE: Paying for clarification Thu, 8 Jan 2009 21:20:32 -0700
  • RE: Paying for clarification Thu, 8 Jan 2009 23:14:16 -0700
  • RE: Paying for clarification Sun, 11 Jan 2009 17:23:43 -0700
  • RE: Is it just me? Sun, 11 Jan 2009 21:59:30 -0700
  • RE: C &C wind load on parapets - really around 45 psf? Mon, 12 Jan 2009 21:14:34 -0700
  • RE: Australian Bldg. Code Mon, 12 Jan 2009 23:04:46 -0700
  • RE: C &C wind load on parapets - really around 45 psf? Mon, 12 Jan 2009 23:34:29 -0700
  • RE: C &C wind load on parapets - really around 45 psf? Tue, 13 Jan 2009 17:31:03 -0700
  • RE: Catenary Wed, 14 Jan 2009 17:26:20 -0700
  • RE: Wind Thu, 15 Jan 2009 17:21:10 -0700
  • RE: Lateral Stability of a Box Beam ? Thu, 15 Jan 2009 17:34:51 -0700
  • RE: Lateral Stability of a Box Beam ? Sun, 18 Jan 2009 19:29:29 -0700
  • RE: Lateral Stability of a Box Beam ? (Bracing two independent beams by turning into single box beam) Wed, 21 Jan 2009 17:12:55 -0700
  • RE: Lateral Stability of a Box Beam ? Thu, 22 Jan 2009 16:37:14 -0700
  • RE: SEI wind design example Sun, 1 Feb 2009 17:51:26 -0700
  • RE: Licensed Fire Technicians Mon, 2 Feb 2009 23:17:29 -0700
  • RE: FEM Add-In for Excel Sun, 8 Feb 2009 17:45:49 -0700
  • RE: DOS to Windows Printing Problem Sun, 15 Feb 2009 17:56:24 -0700
  • RE: Steel connection design Wed, 18 Feb 2009 21:03:18 -0700
  • RE: progressive collapse Thu, 19 Feb 2009 22:41:10 -0700
  • RE: ASCE 7 Wind Loads on Bare Steel Framing - Opinions Wanted Wed, 4 Mar 2009 21:22:33 -0700

• Daniel Popp
  • Re: curved beams Wed, 14 Jan 2009 15:51:29 -0700
  • Re: ASCE 7-05: RSA Procedure per 12.9 Thu, 19 Feb 2009 17:05:16 -0700
  • Re: ASCE 7-05: RSA Procedure per 12.9 Fri, 20 Feb 2009 11:15:45 -0700

• Daryl Richardson
  • Re: Plotting pdf Sun, 8 Feb 2009 12:03:22 -0700
  • Re: Valley Rafters Sun, 8 Feb 2009 12:25:02 -0700
  • Re: Valley Rafters Sun, 8 Feb 2009 12:59:10 -0700
  • DOS to Windows Printing Problem Fri, 13 Feb 2009 12:15:25 -0700
  • Re: ASCE 7-05: Ice Loads Due To Freezing Rain (Chapter 10) Tue, 24 Feb 2009 18:06:09 -0700
  • Re: Concrete Bench With Wall Thu, 26 Feb 2009 10:24:21 -0700
  • Re: DOS to Windows Printing Problem Mon, 2 Mar 2009 14:46:44 -0700
  • Re: Frozen soil = disturbed earth? Sun, 22 Mar 2009 14:34:17 -0600
  • Re: Frozen soil = disturbed earth? Sun, 22 Mar 2009 22:17:24 -0600
  • Re: Steel Joist Seat Height Wed, 25 Mar 2009 10:35:25 -0600
  • Re: history of the list Wed, 25 Mar 2009 11:00:36 -0600
  • Re: Frozen soil = disturbed earth? Sun, 29 Mar 2009 07:14:12 -0600

• David Fisher
  • RE: Paying for clarification Wed, 7 Jan 2009 11:21:37 -0700
  • RE: Paying for clarification Wed, 7 Jan 2009 11:50:19 -0700
  • RE: Paying for clarification Wed, 7 Jan 2009 12:03:39 -0700
  • RE: White Male Professionals Sun, 25 Jan 2009 08:21:22 -0700
  • SMALL JV opportunity NorCal Mon, 26 Jan 2009 11:30:42 -0700
  • RE: Facing mistakes in structural design Thu, 29 Jan 2009 10:13:48 -0700
  • RE: Facing mistakes in structural design (a fantasy) Thu, 29 Jan 2009 10:35:57 -0700
  • RE: Facing mistakes in structural design (a fantasy) Fri, 30 Jan 2009 09:59:34 -0700
  • RE: Concrete Spring Constant for Base Plate Modeling Fri, 30 Jan 2009 10:37:01 -0700
  • RE: Concrete Spring Constant for Base Plate Modeling Fri, 30 Jan 2009 11:44:41 -0700
  • RE: thor's pool Sat, 31 Jan 2009 11:05:26 -0700
  • RE: Job Opening - anybody Mon, 16 Mar 2009 16:29:33 -0600
  • RE: CHINESE STEEL Tue, 31 Mar 2009 12:07:16 -0600

• David Francis Caballero
  • Steel connection design Wed, 18 Feb 2009 07:10:44 -0700
  • Re: Steel connection design Wed, 18 Feb 2009 19:37:53 -0700

• David Merrick, Structural Engineer, Merrick Group
  • new job web site Tue, 6 Jan 2009 09:54:03 -0700
  • SEI wind design example Sun, 1 Feb 2009 12:44:47 -0700
  • Re: SEI wind design example Fri, 6 Feb 2009 09:38:23 -0700

• David Topete
  • Re: Paying for clarification Wed, 7 Jan 2009 11:46:58 -0700
  • Re: test2 Thu, 8 Jan 2009 11:34:45 -0700
  • Re: Rho and Omega Mon, 12 Jan 2009 17:32:50 -0700
  • Re: Rho and Omega Mon, 12 Jan 2009 17:46:24 -0700
  • Re: curved beams Wed, 14 Jan 2009 15:02:12 -0700
  • Re: curved beams Wed, 14 Jan 2009 18:36:11 -0700
  • Re: Availability of Older AutoCAD Versions Tue, 20 Jan 2009 16:51:47 -0700
  • Re: Shear Flow AISC 13th Ed Mon, 26 Jan 2009 11:52:01 -0700
  • Re: Facing mistakes in structural design Fri, 30 Jan 2009 08:34:28 -0700
  • Re: Facing mistakes in structural design Fri, 30 Jan 2009 08:35:38 -0700
  • Re: ACI 530 R=1.5 Thu, 5 Feb 2009 09:27:20 -0700
  • Re: ACI 530 R=1.5 Thu, 5 Feb 2009 09:58:13 -0700
  • Re: Drag Connections to Concrete Tilt-up Thu, 12 Feb 2009 17:24:06 -0700
  • Re: ASCE 7 Section 12.2.5.6 Thu, 19 Feb 2009 11:22:25 -0700
  • Re: ASCE 7 Section 12.2.5.6 Thu, 19 Feb 2009 12:28:32 -0700
  • Re: Tilt Up Building Seismic force Resisting System Fri, 20 Feb 2009 16:58:59 -0700
  • Re: Tilt Up Building Seismic force Resisting System Fri, 20 Feb 2009 17:13:17 -0700
  • Re: Shear in NDS (and deflection) Thu, 26 Feb 2009 16:33:42 -0700
  • Re: Brass Railing Thu, 12 Mar 2009 09:22:06 -0600
  • Re: Cold-formed corrugated Tue, 17 Mar 2009 13:05:50 -0600
  • Re: Steel Joist Seat Height Thu, 26 Mar 2009 11:32:38 -0600
  • Re: joist seats Fri, 27 Mar 2009 13:59:52 -0600
  • Re: CHINESE STEEL Tue, 31 Mar 2009 11:36:41 -0600

• Dennis Wish
  • Paying for clarification Tue, 6 Jan 2009 13:31:51 -0700
  • RE: Multi-Lat 2008 Tue, 6 Jan 2009 13:39:56 -0700
  • Wind design on hillside and slopes - tools Tue, 6 Jan 2009 13:47:29 -0700
  • RE: Paying for clarification Thu, 8 Jan 2009 17:39:14 -0700
  • RE: Paying for clarification Thu, 8 Jan 2009 17:55:44 -0700
  • RE: Paying for clarification Thu, 8 Jan 2009 17:56:53 -0700
  • RE: Paying for clarification Thu, 8 Jan 2009 18:06:17 -0700
  • RE: Wind design on hillside and slopes - tools Thu, 8 Jan 2009 18:10:08 -0700
  • Why continue to support professional associations involved in code creation? Thu, 8 Jan 2009 18:15:48 -0700
  • If so many agree, why remain apathetic - Code Discussion Thu, 8 Jan 2009 19:02:40 -0700
  • RE: Paying for clarification Thu, 8 Jan 2009 22:20:20 -0700
  • Scott & Joe in Recovery after Kidney Transplant Wed, 11 Feb 2009 14:22:06 -0700
  • Scott News Wed, 11 Feb 2009 17:12:35 -0700
  • RE: Sole Plate to Raised Wood Diaphragm Shear Transfer Mon, 16 Feb 2009 11:08:55 -0700
  • will there be a change in ASCE 7-05 once the ICC 2009 code is approved? Mon, 16 Feb 2009 11:30:29 -0700
  • RE: Remove from list Thu, 26 Feb 2009 00:31:39 -0700
  • RE: some code issues Fri, 27 Feb 2009 15:31:01 -0700

• dfisher
  • RE: Opportunities in Texas for Structural Engineers Sat, 7 Feb 2009 09:42:55 -0700
  • Jv opportunity Sat, 28 Mar 2009 10:33:02 -0600
  • Casey H. Sat, 28 Mar 2009 11:16:24 -0600
  • California SE question: Essential facilities Sat, 28 Mar 2009 18:53:08 -0600
  • Re: California SE question: Essential facilities Sun, 29 Mar 2009 08:25:16 -0600

• Dick_Roberts
  • RE: Post-Installed Threaded Insert Wed, 11 Mar 2009 10:45:47 -0600
  • RE: Post-Installed Threaded Insert Wed, 11 Mar 2009 10:50:41 -0600

• Dickey, David
  • Low alkali cement Thu, 19 Feb 2009 14:32:31 -0700

• Doc Moyle
  • RE: Sds for building elements and Connections Fri, 6 Mar 2009 14:59:07 -0700

• Donald Bruckman
  • RE: SIPS in Seismic Design Category D, E ,F Mon, 26 Jan 2009 11:02:53 -0700

• Donny Harris
  • RE: wood glue Wed, 7 Jan 2009 17:01:39 -0700
  • RE: Point supported glass design Thu, 12 Mar 2009 12:02:56 -0600
  • RE: Post-Installed Threaded Insert Thu, 12 Mar 2009 13:35:04 -0600

• Doug Mayer
  • Wind Thu, 15 Jan 2009 15:44:17 -0700
  • RE: Wind Fri, 16 Jan 2009 09:58:03 -0700
  • RE: Does George Housner deserve better? Tue, 3 Feb 2009 11:25:24 -0700
  • RE: Drag Connections to Concrete Tilt-up Thu, 12 Feb 2009 17:24:49 -0700
  • RE: Wind loads: ASD or Strength? Tue, 17 Feb 2009 11:27:46 -0700
  • RE: Tilt Up Building Seismic force Resisting System Fri, 20 Feb 2009 17:08:43 -0700
  • RE: Structural Steel Price - NEW IMPROVED PROCESS! Tue, 24 Feb 2009 17:11:40 -0700
  • RE: some code issues Fri, 27 Feb 2009 15:59:05 -0700
  • RE: Frictin to Resist Seismic Forces Fri, 13 Mar 2009 11:58:48 -0600
  • RE: Frictin to Resist Seismic Forces Fri, 13 Mar 2009 12:00:43 -0600

• Douglas Boyd
  • RE: Remove from list Sat, 21 Feb 2009 09:59:43 -0700

• Drew Morris
  • Re: Paying for clarification Wed, 7 Jan 2009 11:36:45 -0700
  • Re: lightweight concrete topping on wood Tue, 13 Jan 2009 18:41:48 -0700
  • Re: Strong-tie Tue, 27 Jan 2009 10:45:23 -0700
  • Re: Swimming Pools Thu, 29 Jan 2009 10:48:51 -0700
  • Re: Certified Fire Protection Fri, 30 Jan 2009 18:24:54 -0700
  • Re: thor's pool Sat, 31 Jan 2009 15:19:34 -0700
  • Re: Concrete Bench With Wall Thu, 26 Feb 2009 10:47:07 -0700
  • Electrocuting elephants was Re: some code issues Fri, 27 Feb 2009 17:24:17 -0700
  • Re: IT question Tue, 3 Mar 2009 10:58:00 -0700
  • Re: Cold-formed corrugated Tue, 17 Mar 2009 13:04:53 -0600
  • Re: Cold-formed corrugated Tue, 17 Mar 2009 15:38:08 -0600
  • Re: History of Seaint List Mon, 23 Mar 2009 12:05:08 -0600
  • Re: Frozen soil = disturbed earth? Mon, 23 Mar 2009 13:42:59 -0600
  • Re: Frozen soil = disturbed earth? Tue, 24 Mar 2009 12:00:38 -0600
  • Re: Steel Joist Seat Height Thu, 26 Mar 2009 11:13:15 -0600
  • Re: Steel Joist Seat Height Thu, 26 Mar 2009 11:29:59 -0600

• ECVAl3
  • Re: Structural Steel Price Tue, 24 Feb 2009 20:13:13 -0700

• Edmond San Jose
  • Long-span PVC Tent (Conical) Sun, 4 Jan 2009 18:30:33 -0700

• edmondo san jose
  • Underground Water Tank in Gulf Thu, 15 Jan 2009 21:57:51 -0700

• Ehrlich, Gary
  • RE: Paying for clarification Wed, 7 Jan 2009 15:29:06 -0700
  • RE: Paying for clarification Wed, 14 Jan 2009 12:16:35 -0700
  • RE: Wind Fri, 16 Jan 2009 06:57:36 -0700
  • RE: ICF Shear Wall in SDC C Fri, 6 Mar 2009 06:52:32 -0700
  • ICF Shear Wall in SDC C Fri, 6 Mar 2009 06:58:05 -0700
  • Test e-mail Fri, 6 Mar 2009 07:05:21 -0700
  • test e-mail 2 Fri, 6 Mar 2009 07:06:26 -0700

• ENGRLAINES
  • Valley Rafters Sat, 7 Feb 2009 20:38:19 -0700

• Eric Ober
  • RE: Lateral Stability of a Box Beam ? Thu, 15 Jan 2009 12:04:29 -0700

• Eric Tompos
  • RE: Ventilate stud spaces in earthquake retrofits Mon, 16 Feb 2009 08:30:34 -0700
  • Standing Seam Metal Roofing Wind Uplift Calculations Fri, 27 Feb 2009 13:43:44 -0700

• erik_g
  • RE: Licensed Fire Technicians Mon, 2 Feb 2009 21:21:21 -0700
  • RE: Opportunities in Texas for Structural Engineers Fri, 6 Feb 2009 18:56:16 -0700
  • RE: Remove from list Fri, 20 Feb 2009 21:13:01 -0700

• Felker, Brian
  • Design of Double Angle Shear Connection for Extreme Ductility Thu, 19 Feb 2009 19:14:55 -0700

• Friis, Donna
  • Code Discussion Fri, 9 Jan 2009 09:12:38 -0700

• FSRahbar
  • Dynamic Analysis Wed, 4 Feb 2009 19:40:05 -0700
  • Re: CT Equipment Wed, 11 Feb 2009 11:38:29 -0700
  • Re: CT Equipment Wed, 11 Feb 2009 11:42:44 -0700
  • Re: Re-grading of Lumber Wed, 4 Mar 2009 14:37:45 -0700
  • Re: Frictin to Resist Seismic Forces Fri, 13 Mar 2009 11:58:13 -0600

• Garner, Robert
  • RE: Paying for clarification Tue, 6 Jan 2009 14:15:05 -0700
  • RE: curved beams Wed, 14 Jan 2009 14:50:28 -0700
  • RE: curved beams Wed, 14 Jan 2009 17:39:27 -0700
  • RE: Lateral Stability of a Box Beam ? Thu, 15 Jan 2009 12:06:15 -0700
  • RE: Smart Columns Article Fri, 23 Jan 2009 08:12:07 -0700
  • RE: Quick. Ideas pls. Tue, 17 Feb 2009 08:25:13 -0700
  • RE: Post-Installed Threaded Insert Wed, 11 Mar 2009 10:38:23 -0600
  • RE: Post-Installed Threaded Insert Wed, 11 Mar 2009 10:40:16 -0600
  • RE: Point supported glass design Wed, 11 Mar 2009 15:38:43 -0600

• Gary L. Hodgson and Assoc.
  • Re: Catenary Fri, 16 Jan 2009 05:32:30 -0700
  • Re: Lateral Stability of a Box Beam ? Fri, 16 Jan 2009 05:43:04 -0700
  • Re: Swimming Pools Fri, 30 Jan 2009 05:44:57 -0700
  • Re: Facing mistakes in structural design Fri, 30 Jan 2009 05:52:16 -0700
  • Re: Facing mistakes in structural design Sat, 31 Jan 2009 11:16:28 -0700
  • Re: Steel connection design Thu, 19 Feb 2009 05:51:12 -0700
  • Re: Remove from list Mon, 23 Feb 2009 05:46:33 -0700
  • Re: 2005 Aluminum Design Manual Wed, 25 Feb 2009 05:44:09 -0700
  • Re: ASCE 7 Wind Loads on Bare Steel Framing - Opinions Wanted Thu, 5 Mar 2009 05:56:53 -0700
  • Re: Point supported glass design Fri, 13 Mar 2009 05:59:49 -0600
  • Re: IT question Tue, 17 Mar 2009 05:51:32 -0600
  • Re: Steel Joist Seat Height Thu, 26 Mar 2009 05:56:12 -0600
  • Re: Steel Joist Seat Height Fri, 27 Mar 2009 06:34:28 -0600

• Gautam Manandhar
  • RE: Paying for clarification Thu, 8 Jan 2009 16:48:27 -0700
  • RE: curved beams Tue, 13 Jan 2009 17:43:21 -0700
  • RE: curved channel Wed, 14 Jan 2009 10:36:11 -0700
  • RE: Swimming Pools Thu, 29 Jan 2009 11:24:02 -0700
  • Saw Cut joints in concrete walls Wed, 11 Feb 2009 11:08:29 -0700
  • RE: Saw Cut joints in concrete walls Wed, 11 Feb 2009 11:36:58 -0700
  • RE: Saw Cut joints in concrete walls Wed, 11 Feb 2009 14:55:55 -0700
  • RE: IT question Mon, 2 Mar 2009 17:57:21 -0700
  • RE: Job Opening - anybody Mon, 16 Mar 2009 16:04:54 -0600
  • RE: IT question Mon, 16 Mar 2009 16:17:43 -0600

• Gerard Madden, SE
  • Re: Wind Load Topographic Effects Mon, 5 Jan 2009 12:42:54 -0700
  • Re: new job web site Tue, 6 Jan 2009 10:16:06 -0700
  • Re: Is it just me? Mon, 12 Jan 2009 10:38:56 -0700
  • Re: Is it just me? Mon, 12 Jan 2009 11:54:40 -0700
  • SIPS in Seismic Design Category D, E ,F Fri, 23 Jan 2009 14:55:06 -0700
  • Re: SIPS in Seismic Design Category D, E ,F Fri, 23 Jan 2009 16:25:03 -0700
  • Re: Facing mistakes in structural design Fri, 30 Jan 2009 12:39:29 -0700
  • Re: Plotting pdf Sat, 7 Feb 2009 21:51:54 -0700
  • Re: CT Equipment Wed, 11 Feb 2009 11:10:00 -0700
  • Re: Drag Connections to Concrete Tilt-up Thu, 12 Feb 2009 23:43:18 -0700
  • Re: Drag Connections to Concrete Tilt-up Thu, 12 Feb 2009 23:43:21 -0700
  • Re: Maximum seismic sway Tue, 17 Feb 2009 12:16:05 -0700
  • Re: ASCE 7-05: RSA Procedure per 12.9 Thu, 19 Feb 2009 17:06:26 -0700
  • Re: ASCE 7-05: Direction of Loading (12.5) Fri, 20 Feb 2009 10:32:47 -0700
  • Re: Remove from list Sat, 21 Feb 2009 19:25:06 -0700
  • Re: Remove from list Sun, 22 Feb 2009 15:05:26 -0700
  • Structural Steel Price Tue, 24 Feb 2009 15:22:11 -0700
  • Re: Structural Steel Price - NEW IMPROVED PROCESS! Tue, 24 Feb 2009 17:05:03 -0700
  • Re: Structural Steel Price Tue, 24 Feb 2009 21:53:21 -0700
  • Re: ICF Shear Wall in SDC C Thu, 26 Feb 2009 12:32:49 -0700
  • Re: Shear in NDS Thu, 26 Feb 2009 14:34:43 -0700
  • Re: some code issues Mon, 2 Mar 2009 19:07:50 -0700
  • Post-Installed Threaded Insert Wed, 11 Mar 2009 10:28:00 -0600
  • Re: Post-Installed Threaded Insert Wed, 11 Mar 2009 10:48:06 -0600
  • Re: Post-Installed Threaded Insert Wed, 11 Mar 2009 10:52:01 -0600
  • Re: Post-Installed Threaded Insert Wed, 11 Mar 2009 10:55:30 -0600
  • Re: Post-Installed Threaded Insert Wed, 11 Mar 2009 10:55:54 -0600
  • Re: Green Point Rated Concrete Fri, 13 Mar 2009 10:32:02 -0600
  • Re: Green Point Rated Concrete Mon, 16 Mar 2009 09:43:19 -0600
  • Concrete and Vibration Tue, 17 Mar 2009 14:47:14 -0600
  • Re: Concrete and Vibration Wed, 18 Mar 2009 10:07:28 -0600
  • Re: Concrete and Vibration Thu, 19 Mar 2009 12:10:10 -0600
  • Re: History of Seaint List Mon, 23 Mar 2009 13:03:39 -0600
  • Re: California SE question: Essential facilities Mon, 30 Mar 2009 10:08:18 -0600
  • Re: California SE question: Essential facilities Mon, 30 Mar 2009 10:09:43 -0600
  • Re: CHINESE STEEL Tue, 31 Mar 2009 09:36:46 -0600
  • Re: California SE question: Essential facilities - cans and pins Tue, 31 Mar 2009 09:40:34 -0600
  • Re: CHINESE STEEL Tue, 31 Mar 2009 12:42:58 -0600

• Gil Brock
  • RE: Paying for clarification Wed, 7 Jan 2009 16:53:26 -0700
  • RE: Paying for clarification Thu, 8 Jan 2009 18:17:23 -0700
  • RE: IT question Mon, 2 Mar 2009 16:29:03 -0700

• Golding Kent T
  • RE: Saw Cut joints in concrete walls Thu, 12 Feb 2009 09:08:06 -0700

• Gordon Goodell
  • RE: IBC 2006 Mon, 19 Jan 2009 10:24:36 -0700
  • Concrete diaphragms Mon, 19 Jan 2009 17:41:06 -0700
  • Visual Analysis for diaphragms Fri, 23 Jan 2009 07:17:57 -0700
  • Strong-tie Tue, 27 Jan 2009 09:45:46 -0700
  • Archive (WAS: Swimming Pools) Thu, 29 Jan 2009 14:51:21 -0700
  • RE: Archive (WAS: Swimming Pools) Fri, 30 Jan 2009 10:18:10 -0700
  • RE: Adjustment Factors Cd for timber column Thu, 5 Feb 2009 11:21:53 -0700
  • RE: Adjustment Factors Cd for timber column Thu, 5 Feb 2009 14:08:19 -0700
  • ICC evaluation process Fri, 13 Feb 2009 13:11:44 -0700
  • RE: Wind loads: ASD or Strength? Tue, 17 Feb 2009 10:36:46 -0700
  • Cold-formed corrugated Tue, 17 Mar 2009 12:47:33 -0600
  • RE: Cold-formed corrugated Wed, 18 Mar 2009 11:43:00 -0600

• Haan, Scott M POA
  • RE: Is it just me? Fri, 9 Jan 2009 17:23:31 -0700
  • RE: Is it just me? Fri, 9 Jan 2009 17:42:12 -0700
  • RE: Frozen soil = disturbed earth? Fri, 20 Mar 2009 16:21:41 -0600
  • RE: History of Seaint List Fri, 20 Mar 2009 17:41:05 -0600
  • RE: Frozen soil = disturbed earth? Fri, 20 Mar 2009 17:42:01 -0600
  • RE: Frozen soil = disturbed earth? Mon, 23 Mar 2009 13:33:00 -0600
  • RE: Frozen soil = disturbed earth? Mon, 23 Mar 2009 15:01:35 -0600
  • RE: Frozen soil = disturbed earth? Tue, 24 Mar 2009 11:37:45 -0600
  • RE: Steel Joist Seat Height Wed, 25 Mar 2009 11:09:53 -0600

• Harold Sprague
  • RE: Expert Witness Course Thu, 8 Jan 2009 09:15:09 -0700
  • RE: curved beams Wed, 14 Jan 2009 13:57:47 -0700
  • RE: tensile pull-through Tue, 20 Jan 2009 09:47:34 -0700
  • RE: Bond Strength of Portland Grouts Wed, 21 Jan 2009 17:12:48 -0700
  • RE: Friction Clip Connections, are they still accepted by ASCE 7? Unistut Sun, 25 Jan 2009 13:47:39 -0700
  • RE: Concrete Spring Constant for Base Plate Modeling Sat, 31 Jan 2009 16:36:26 -0700
  • RE: Anchor bolt sleeve - pretensioning Mon, 2 Feb 2009 17:15:10 -0700
  • RE: Anchor bolt sleeve - pretensioning Mon, 2 Feb 2009 21:19:36 -0700
  • RE: Codes comparison Wed, 4 Feb 2009 19:39:27 -0700
  • RE: Design of Double Angle Shear Connection for Extreme Ductility Fri, 20 Feb 2009 00:36:49 -0700
  • RE: Low alkali cement Fri, 20 Feb 2009 01:38:24 -0700
  • RE: Moxie and impermeabilising concrete Fri, 20 Feb 2009 01:45:39 -0700
  • RE: IBC 2006 - SEISMIC DESIGN OF STEEL - 2205.2.2 Sat, 21 Feb 2009 00:25:21 -0700
  • RE: IBC 2006 - SEISMIC DESIGN OF STEEL - 2205.2.2 Sat, 21 Feb 2009 15:19:59 -0700
  • RE: ASCE 7-05: Ice Loads Due To Freezing Rain (Chapter 10) Sun, 1 Mar 2009 15:26:46 -0700
  • RE: ASCE-7 Ice Loads Sun, 1 Mar 2009 15:27:45 -0700
  • RE: Welding Through Metal Roof Deck Mon, 2 Mar 2009 17:44:50 -0700
  • RE: Moxie and impermeabilising concrete Wed, 4 Mar 2009 23:04:44 -0700
  • RE: ASCE 7 Wind Loads on Bare Steel Framing - Opinions Wanted Thu, 5 Mar 2009 00:03:23 -0700
  • RE: ASCE 7 Wind Loads on Bare Steel Framing - Opinions Wanted Fri, 6 Mar 2009 00:19:10 -0700
  • RE: Frozen soil = disturbed earth? Sat, 21 Mar 2009 13:07:31 -0600
  • RE: Frozen soil = disturbed earth? Sun, 22 Mar 2009 17:17:57 -0600
  • RE: Frozen soil = disturbed earth? Mon, 23 Mar 2009 13:11:06 -0600
  • RE: Frozen soil = disturbed earth? Mon, 23 Mar 2009 22:31:09 -0600
  • RE: Vertical joint in Matt (raft) foundation Sat, 28 Mar 2009 20:15:52 -0600

• IRV FRUCHTMAN
  • timber pile brace connection Tue, 20 Jan 2009 15:11:30 -0700
  • Re: Archive (WAS: Swimming Pools) Fri, 30 Jan 2009 07:17:18 -0700
  • Re: Adjustment Factors Cd for timber column Thu, 5 Feb 2009 10:36:36 -0700
  • Re: Examples Structural Wood Design Table M9.2-2 Sun, 8 Feb 2009 15:08:55 -0700

• jack FAHEY
  • [no subject] Sat, 14 Feb 2009 10:13:07 -0700

• James Getaz
  • Re: Green Point Rated Concrete Sun, 15 Mar 2009 06:22:00 -0600

• Jan Blok
  • Re: Valley Rafters Sun, 8 Feb 2009 18:30:10 -0700

• Jared Keyser
  • Ice loads Thu, 26 Feb 2009 09:49:14 -0700
  • Re: Frozen soil = disturbed earth? Mon, 23 Mar 2009 10:19:45 -0600

• Jason Christensen
  • RE: Is it just me? Mon, 12 Jan 2009 11:00:21 -0700
  • RE: Adjustment Factors Cd for timber column Thu, 5 Feb 2009 12:43:42 -0700
  • RE: Examples Structural Wood Design Table M9.2-2 Mon, 9 Feb 2009 08:39:50 -0700
  • RE: Examples Structural Wood Design Table M9.2-2 Mon, 9 Feb 2009 09:30:38 -0700
  • RE: Swapping Beam Nodes in RISA Mon, 9 Feb 2009 17:15:22 -0700
  • RE: Swapping Beam Nodes in RISA Tue, 10 Feb 2009 08:27:56 -0700
  • CT Equipment Wed, 11 Feb 2009 11:06:13 -0700
  • FW: Wind loads: ASD or Strength? Tue, 17 Feb 2009 09:33:14 -0700
  • Wind loads: ASD or Strength? Tue, 17 Feb 2009 10:20:22 -0700
  • RE: Wind loads: ASD or Strength? Tue, 17 Feb 2009 10:44:40 -0700

• Javier Encinas
  • RE: Bridge Seismic Analysis Sun, 18 Jan 2009 19:43:06 -0700

• Jeff Coronado
  • Wind Provision Seminar Fri, 16 Jan 2009 15:28:47 -0700

• Jeff Smith
  • RE: Wind Load Topographic Effects Thu, 1 Jan 2009 21:57:14 -0700
  • RE: Wind Load Topographic Effects Thu, 1 Jan 2009 23:41:04 -0700
  • RE: wood glue Tue, 6 Jan 2009 12:15:35 -0700
  • RE: Wind design on hillside and slopes - tools Tue, 6 Jan 2009 17:05:34 -0700
  • RE: Wind design on hillside and slopes - tools Tue, 6 Jan 2009 20:28:34 -0700
  • RE: Vibration Acceptance Criteria Tue, 13 Jan 2009 09:49:10 -0700
  • RE: lightweight concrete topping on wood Tue, 13 Jan 2009 19:15:56 -0700
  • RE: 11 x 17 printer Fri, 13 Mar 2009 15:37:13 -0600

• Jeremy White
  • Smart Columns Article Fri, 23 Jan 2009 06:36:45 -0700
  • Shear Flow AISC 13th Ed Mon, 26 Jan 2009 11:46:02 -0700
  • RE:Shear Flow AISC 13th Ed. Mon, 26 Jan 2009 12:35:51 -0700
  • RE: Re: Shear Flow AISC 13th Ed Mon, 26 Jan 2009 15:10:48 -0700
  • RE:Shear Flow AISC 13th Ed. Thu, 29 Jan 2009 07:49:33 -0700
  • RE: Does George Housner deserve better? Thu, 5 Feb 2009 13:35:29 -0700
  • RE: History of Seaint List Tue, 24 Mar 2009 09:41:21 -0600

• Jerry Coombs
  • Re: "Single Angle" Combined Torsion & Bi-Axial Bending (repost) Wed, 4 Feb 2009 06:07:53 -0700
  • Rebar pull test Tue, 3 Mar 2009 17:23:06 -0700
  • 11 x 17 printer Fri, 13 Mar 2009 11:26:52 -0600
  • 11 x 17 Printers Fri, 13 Mar 2009 12:02:58 -0600
  • RE: ACI Chapt. 22 Wed, 18 Mar 2009 09:56:58 -0600

• Jim Getaz
  • Goddard Space Flight Center Code 220 SRD for Facilities version 2/18/2005 Thu, 29 Jan 2009 05:50:36 -0700
  • Re: ASCE 7 Wind Loads on Bare Steel Framing - Opinions Wanted Fri, 6 Mar 2009 07:38:28 -0700
  • Re: Green Point Rated Concrete Tue, 17 Mar 2009 06:02:56 -0600
  • Re: Concrete and Vibration Wed, 18 Mar 2009 05:31:47 -0600
  • Re: California SE question: Essential facilities - cans and pins Tue, 31 Mar 2009 05:55:32 -0600

• Jim Lutz
  • ASCE-7 Ice Loads Wed, 25 Feb 2009 09:45:11 -0700

• Jim Wilson
  • Point supported glass design Wed, 11 Mar 2009 15:29:10 -0600
  • Re: Point supported glass design Thu, 12 Mar 2009 09:03:15 -0600
  • Re: 11 x 17 printer Fri, 13 Mar 2009 15:14:35 -0600
  • Re: Cold-formed corrugated Tue, 17 Mar 2009 15:25:44 -0600
  • Frozen soil = disturbed earth? Fri, 20 Mar 2009 13:47:31 -0600

• Jimenez, Jorge A.
  • RE: curved beams Wed, 14 Jan 2009 14:09:36 -0700
  • SEAINT Server Test Thu, 15 Jan 2009 04:54:38 -0700

• Jnapd
  • Re: Wind Load Topographic Effects Mon, 5 Jan 2009 10:18:48 -0700
  • Re: component and cladding vs MWFRS Mon, 5 Jan 2009 10:21:24 -0700
  • Re: curved beams Thu, 15 Jan 2009 01:20:29 -0700
  • Re: re-use fees Mon, 9 Feb 2009 11:05:00 -0700
  • Re: re-use fees Mon, 9 Feb 2009 14:54:50 -0700
  • Re: Cold-formed corrugated Wed, 18 Mar 2009 14:06:57 -0600
  • Re: OT - Taxes Mon, 23 Mar 2009 10:16:03 -0600

• Joe Goldbronn
  • Drag Connections to Concrete Tilt-up Thu, 12 Feb 2009 16:55:24 -0700

• John L.Smart
  • RE: some code issues Mon, 2 Mar 2009 13:25:19 -0700
  • RE: Brass Railing Tue, 10 Mar 2009 11:48:13 -0600
  • RE: Steel Joist Seat Height Fri, 27 Mar 2009 08:11:58 -0600

• John Nader
  • Vertical joint in Matt (raft) foundation Fri, 27 Mar 2009 09:48:28 -0600

• john yang
  • Concrete Spring Constant for Base Plate Modeling Fri, 30 Jan 2009 10:31:06 -0700
  • Re: Concrete Spring Constant for Base Plate Modeling Fri, 30 Jan 2009 11:38:03 -0700
  • Re: IBC Section 1908.1.16 is a bugger Fri, 30 Jan 2009 11:43:10 -0700
  • Re: Concrete Spring Constant for Base Plate Modeling Fri, 30 Jan 2009 12:22:34 -0700
  • Re: IBC Section 1908.1.16 is a bugger Fri, 30 Jan 2009 13:19:25 -0700
  • Re: IBC Section 1908.1.16 is a bugger Tue, 3 Feb 2009 14:49:44 -0700

• Jordan Truesdell, PE
  • Re: Catenary Thu, 15 Jan 2009 14:58:38 -0700
  • References for brick fire damage Thu, 29 Jan 2009 14:04:56 -0700
  • Re: Valley Rafters Sun, 8 Feb 2009 08:04:40 -0700
  • Re: Conversion of Excel to Word Wed, 11 Feb 2009 07:00:25 -0700
  • Re: Wind loads: ASD or Strength? Wed, 18 Feb 2009 06:14:28 -0700
  • Anyone going to the AISC welding seminar in NY tomorrow? Wed, 18 Feb 2009 09:42:12 -0700
  • Re: Direct Analysis Method Thu, 5 Mar 2009 08:24:10 -0700
  • Re: Brass Railing Wed, 11 Mar 2009 14:28:49 -0600
  • Re: Point supported glass design Wed, 11 Mar 2009 17:16:00 -0600
  • Re: Point supported glass design Thu, 12 Mar 2009 11:33:07 -0600
  • Re: Point supported glass design Thu, 12 Mar 2009 18:29:21 -0600
  • Re: OT - Taxes Sun, 22 Mar 2009 18:31:45 -0600
  • Re: History of Seaint List Tue, 24 Mar 2009 18:52:42 -0600

• Jorge Jimenez
  • Bridge Seismic Analysis Thu, 15 Jan 2009 18:40:15 -0700
  • Facing mistakes in structural design Thu, 29 Jan 2009 10:08:23 -0700
  • AASHTO LRFD Nominal Shear Resistence for Concrete Sat, 7 Feb 2009 13:17:21 -0700

• Joseph R. Grill
  • Diaphragm and Framed Dormers Sun, 8 Feb 2009 13:16:05 -0700
  • re-use fees Mon, 9 Feb 2009 09:38:10 -0700
  • RE: Diaphragm and Framed Dormers Mon, 9 Feb 2009 09:38:19 -0700
  • RE: re-use fees Mon, 9 Feb 2009 11:30:03 -0700
  • ICF Shear Wall in SDC C Thu, 26 Feb 2009 11:25:12 -0700
  • Minimum Reinforcing in CMU Fri, 27 Mar 2009 14:51:12 -0600

• Josh Plummer
  • RE: Direct Analysis Method Fri, 6 Mar 2009 15:09:59 -0700
  • RE: Concrete and Vibration Thu, 19 Mar 2009 11:02:44 -0600

• jrgrill
  • Re: IT question Mon, 2 Mar 2009 18:13:00 -0700

• jwhite
  • RE: Re: Shear Flow AISC 13th Ed Mon, 26 Jan 2009 17:07:48 -0700
  • RE: Concrete Spring Constant for Base Plate Modeling Fri, 30 Jan 2009 21:33:53 -0700
  • History of Seaint List Thu, 19 Mar 2009 20:14:08 -0600
  • History of Seaint List Fri, 20 Mar 2009 17:29:30 -0600

• ken ng
  • Re: SEI wind design example Mon, 2 Feb 2009 08:42:25 -0700
  • Adjustment Factors Cd for timber column Thu, 5 Feb 2009 10:11:59 -0700
  • Examples Structural Wood Design Table M9.2-2 Fri, 6 Feb 2009 22:36:58 -0700
  • Re: Examples Structural Wood Design Table M9.2-2 Mon, 9 Feb 2009 09:01:00 -0700
  • Re: CHINESE STEEL Tue, 31 Mar 2009 09:45:06 -0600

• Kevin Below
  • Re: Fire Wall Connection Sun, 25 Jan 2009 21:46:53 -0700
  • Moxie and impermeabilising concrete Mon, 16 Feb 2009 21:05:50 -0700
  • Re: Moxie and impermeabilising concrete Wed, 4 Mar 2009 21:07:29 -0700

• Khabbazan, Mehdi
  • Maximum seismic sway Tue, 17 Feb 2009 11:35:18 -0700

• Kipp Martin
  • RE: Post-Installed Threaded Insert Wed, 11 Mar 2009 10:53:38 -0600
  • RE: Post-Installed Threaded Insert Wed, 11 Mar 2009 12:38:02 -0600

• Larry Hauer
  • RE: IBC Section 1908.1.16 is a bugger Tue, 3 Feb 2009 08:41:51 -0700
  • RE: ASCE 7 Section 12.2.5.6 Fri, 20 Feb 2009 09:23:08 -0700
  • Sds values for elements Thu, 5 Mar 2009 14:33:55 -0700
  • Use of Sds fior Elements of Buildings Fri, 6 Mar 2009 08:23:37 -0700
  • Use of Sds fior Elements of Buildings Fri, 6 Mar 2009 08:24:24 -0700
  • Sds for Elements in Buildings Fri, 6 Mar 2009 08:47:45 -0700
  • RE: Sds for building elements and Connections Fri, 6 Mar 2009 16:23:38 -0700
  • RE: Frictin to Resist Seismic Forces Fri, 13 Mar 2009 15:09:21 -0600

• lila haj najafi
  • nonlinear static analysis program Tue, 20 Jan 2009 03:04:20 -0700
  • phd thesis Sat, 14 Feb 2009 02:52:42 -0700
  • list of ISI journals Mon, 9 Mar 2009 03:07:03 -0600

• lrhauer
  • Sds for building elements and Connections Fri, 6 Mar 2009 09:31:44 -0700
  • Frictin to Resist Seismic Forces Fri, 13 Mar 2009 11:47:43 -0600

• Marius Tomutza
  • Multi-Lat 2008 Mon, 5 Jan 2009 12:31:46 -0700

• Mark D. Baker
  • wood glue Tue, 6 Jan 2009 10:52:29 -0700
  • RE: wood glue Wed, 7 Jan 2009 09:58:09 -0700
  • odd list issue Wed, 7 Jan 2009 17:36:50 -0700
  • list issue again Wed, 7 Jan 2009 17:40:37 -0700
  • test2 Thu, 8 Jan 2009 11:26:01 -0700
  • RE: test2 Thu, 8 Jan 2009 11:56:31 -0700
  • test3.....ah ha ! Thu, 8 Jan 2009 12:00:14 -0700

• Mark Gilligan
  • Re: California SE question: Essential facilities Sun, 29 Mar 2009 02:07:44 -0600

• Mark Johnson
  • RE: curved beams Tue, 13 Jan 2009 21:10:11 -0700
  • Tax Day Today Thu, 15 Jan 2009 15:11:19 -0700
  • Re: Wind - message show up Thu, 15 Jan 2009 15:59:32 -0700
  • RE: Friction Clip Connections, are they still accepted by ASCE 7? Unistut Sun, 25 Jan 2009 18:20:38 -0700
  • RE: Re: Shear Flow AISC 13th Ed Mon, 26 Jan 2009 15:52:30 -0700
  • Re: Anchor bolt sleeve - pretensioning Mon, 2 Feb 2009 17:43:35 -0700
  • RE: ASCE 7 Section 12.2.5.6 Thu, 19 Feb 2009 14:21:34 -0700
  • OT - Taxes Thu, 19 Mar 2009 21:20:34 -0600
  • Fw: OT - Taxes Fri, 20 Mar 2009 01:37:41 -0600
  • Fw: OT - Taxes Fri, 20 Mar 2009 18:49:33 -0600
  • RE: OT - Taxes Sat, 21 Mar 2009 11:34:36 -0600

• Matt Jordan
  • RE: tool anchorage Tue, 13 Jan 2009 09:50:49 -0700

• Matthew Newton
  • TEDDS Software Mon, 2 Mar 2009 07:59:20 -0700
  • Direct Analysis Method Thu, 5 Mar 2009 07:57:48 -0700

• Micayas, Julius
  • RE: Availability of Older AutoCAD Versions Wed, 21 Jan 2009 07:27:35 -0700
  • Question on Staad Pro 2006 Thu, 12 Mar 2009 15:23:35 -0600

• Michael Hemstad
  • History of Seaint List Tue, 24 Mar 2009 07:22:52 -0600

• Michael Hixson
  • Certified Fire Protection Fri, 30 Jan 2009 17:21:15 -0700
  • Licensed Fire Technicians Mon, 2 Feb 2009 15:25:13 -0700
  • RE: Licensed Fire Technicians Mon, 2 Feb 2009 20:23:40 -0700
  • RE: Licensed Fire Technicians Mon, 2 Feb 2009 23:45:18 -0700
  • RE: Licensed Fire Technicians Mon, 2 Feb 2009 23:50:22 -0700

• Michel Blangy
  • RE: Wind Load Topographic Effects Mon, 5 Jan 2009 13:05:32 -0700
  • RE: wood glue Tue, 6 Jan 2009 11:12:38 -0700
  • RE: Paying for clarification Wed, 7 Jan 2009 11:01:52 -0700
  • RE: Paying for clarification Fri, 9 Jan 2009 13:52:11 -0700
  • Availability of Older AutoCAD Versions Tue, 20 Jan 2009 16:39:35 -0700
  • White Male Professionals Fri, 23 Jan 2009 09:31:35 -0700
  • RE: Swimming Pools Thu, 29 Jan 2009 10:24:46 -0700
  • RE: Archive (WAS: Swimming Pools) Thu, 29 Jan 2009 16:33:09 -0700
  • RE: Facing mistakes in structural design (a fantasy) Fri, 30 Jan 2009 09:52:17 -0700
  • RE: Does George Housner deserve better? Wed, 4 Feb 2009 10:36:47 -0700
  • RE: Adjustment Factors Cd for timber column Thu, 5 Feb 2009 10:45:04 -0700
  • RE: Does George Housner deserve better? Thu, 5 Feb 2009 13:25:06 -0700
  • RE: Examples Structural Wood Design Table M9.2-2 Mon, 9 Feb 2009 15:56:25 -0700
  • Sole Plate to Raised Wood Diaphragm Shear Transfer Mon, 16 Feb 2009 10:12:44 -0700
  • RE: Quick. Ideas pls. Tue, 17 Feb 2009 09:34:59 -0700
  • RE: IT question Mon, 2 Mar 2009 15:41:43 -0700
  • RE: IT question Mon, 16 Mar 2009 17:03:57 -0600

• Michelle Motchos
  • RE: wood glue Tue, 6 Jan 2009 12:52:14 -0700

• Mike Jones
  • Re: History of Seaint List Tue, 24 Mar 2009 08:30:22 -0600

• mlcse
  • Re: C &C wind load on parapets - really around 45 psf? Tue, 13 Jan 2009 14:11:46 -0700

• ndz28
  • Re: Paying for clarification Thu, 8 Jan 2009 16:13:09 -0700

• Nguyen, Phuong
  • RE: Does George Housner deserve better? Mon, 2 Feb 2009 14:57:08 -0700
  • RE: Structural Steel Price Tue, 24 Feb 2009 17:32:52 -0700
  • RE: IT question Mon, 16 Mar 2009 17:35:20 -0600

• Nittsi
  • Grouting for Instaltion of Bearings Wed, 21 Jan 2009 06:08:25 -0700
  • System Test for Post tensioning Mon, 2 Mar 2009 01:28:23 -0700
  • AIr vent distance in Post tensioning duct Fri, 27 Mar 2009 23:14:34 -0600

• Oshin Tosounian
  • RE: Is it just me? Fri, 9 Jan 2009 21:41:48 -0700
  • RE: Adjustment Factors Cd for timber column Thu, 5 Feb 2009 11:31:24 -0700
  • Standing Seam Metal Roofing Wind Uplift Calculations Thu, 26 Feb 2009 11:25:45 -0700
  • RE: Standing Seam Metal Roofing Wind Uplift Calculations Mon, 2 Mar 2009 13:27:39 -0700
  • Re-grading of Lumber Wed, 4 Mar 2009 13:32:18 -0700

• Padmanabhan Rajendran
  • Re: Vibration Acceptance Criteria Tue, 13 Jan 2009 11:32:54 -0700
  • RE: curved beams Wed, 14 Jan 2009 12:38:05 -0700
  • RE: curved beams Wed, 14 Jan 2009 12:40:46 -0700
  • Anchor bolt sleeve - pretensioning Mon, 2 Feb 2009 14:01:48 -0700
  • RE: Codes comparison Thu, 5 Feb 2009 09:31:33 -0700
  • Re: Codes comparison Fri, 6 Feb 2009 06:54:49 -0700

• Parag Bande
  • Response Spectrum Mon, 16 Feb 2009 22:12:46 -0700

• Paul Blomberg
  • Re: Underground Water Tank in Gulf Sun, 18 Jan 2009 18:00:05 -0700
  • Re: Friction Clip Connections, are they still accepted by ASCE 7? Unistut Sun, 25 Jan 2009 14:52:53 -0700
  • Steel Joist Seat Height Wed, 25 Mar 2009 09:17:14 -0600
  • Re: joist seat height Thu, 26 Mar 2009 08:11:45 -0600

• Paul Feather
  • RE: wood glue Tue, 6 Jan 2009 10:59:46 -0700
  • RE: lightweight concrete topping on wood Tue, 13 Jan 2009 20:23:03 -0700
  • RE: ACI 530 R=1.5 Thu, 5 Feb 2009 09:36:17 -0700
  • RE: ACI 530 R=1.5 Thu, 5 Feb 2009 10:03:28 -0700
  • RE: Saw Cut joints in concrete walls Wed, 11 Feb 2009 11:14:15 -0700
  • RE: Saw Cut joints in concrete walls Wed, 11 Feb 2009 11:50:29 -0700
  • RE: Sole Plate to Raised Wood Diaphragm Shear Transfer (Sta.Monica) Mon, 16 Feb 2009 21:52:17 -0700
  • IBC Concrete Cover for Fire Wed, 18 Feb 2009 10:43:02 -0700
  • RE: Structural Steel Price - NEW IMPROVED PROCESS! Tue, 24 Feb 2009 18:33:18 -0700
  • RE: California SE question: Essential facilities Sun, 29 Mar 2009 12:28:02 -0600

• Paul Guthrie
  • Re: SIPS in Seismic Design Category D, E ,F Fri, 23 Jan 2009 15:26:44 -0700
  • Re: SIPS in Seismic Design Category D, E ,F Fri, 23 Jan 2009 16:39:17 -0700
  • Re: Shear Flow AISC 13th Ed Mon, 26 Jan 2009 12:18:13 -0700
  • RE: Shear Flow AISC 13th Ed. Mon, 26 Jan 2009 14:45:00 -0700
  • RE: Re: Shear Flow AISC 13th Ed Mon, 26 Jan 2009 16:19:45 -0700
  • Thanks on Shear Flow Ps: digest mode is crap Thu, 29 Jan 2009 08:17:52 -0700
  • Re: "Single Angle" Combined Torsion & Bi-Axial Bending (repost) Wed, 4 Feb 2009 08:48:08 -0700
  • RE: Adjustment Factors Cd for timber column Thu, 5 Feb 2009 10:51:47 -0700
  • RE: Adjustment Factors Cd for timber column Thu, 5 Feb 2009 13:01:32 -0700
  • RE: Adjustment Factors Cd for timber column Thu, 5 Feb 2009 15:12:10 -0700
  • RE: Adjustment Factors Cd for timber column Thu, 5 Feb 2009 16:54:10 -0700

• Paul Ransom
  • Re: Unbraced truss compression flange Tue, 13 Jan 2009 18:13:56 -0700
  • Re: Lateral Stability of a Box Beam ? Sat, 17 Jan 2009 13:26:06 -0700
  • Re: Lateral Stability of a Box Beam ? Tue, 20 Jan 2009 23:05:39 -0700
  • Re: Lateral Stability of a Box Beam ? Sun, 25 Jan 2009 19:49:01 -0700
  • Re: Thanks on Shear Flow Ps: digest mode is crap Sat, 31 Jan 2009 14:03:43 -0700
  • Re: Standing Seam Metal Roofing Wind Uplift Calculations Sun, 1 Mar 2009 10:20:15 -0700
  • Re: Standing Seam Metal Roofing Wind Uplift Calculations Tue, 3 Mar 2009 23:18:43 -0700
  • Corrosion resistant structural bolts Wed, 11 Mar 2009 22:53:48 -0600

• Prabuddha Dasgupta
  • Re: Paying for clarification Wed, 7 Jan 2009 14:58:41 -0700

• Ralph Kratz
  • Re: Frozen soil = disturbed earth? Tue, 24 Mar 2009 11:29:56 -0600

• Rand W Holtham
  • Happy new year. Fri, 2 Jan 2009 06:11:33 -0700
  • happy new year Fri, 2 Jan 2009 06:11:45 -0700
  • Re: component and cladding vs MWFRS Fri, 2 Jan 2009 07:05:42 -0700
  • re: C & C vs MWFRS Fri, 2 Jan 2009 07:14:25 -0700

• raymond shreenan
  • Re: Is it just me? Fri, 9 Jan 2009 17:46:48 -0700
  • Re: Swimming Pools Thu, 29 Jan 2009 13:56:32 -0700

• Rhkratzse
  • Re: Paying for clarification Tue, 6 Jan 2009 13:42:03 -0700
  • Re: Paying for clarification Wed, 7 Jan 2009 12:14:52 -0700
  • Re: Expert Witness Course >> Kansas City Hyatt Regency Thu, 8 Jan 2009 11:37:18 -0700
  • Re: curved beams Wed, 14 Jan 2009 15:19:38 -0700
  • Re: Strong-tie, humor Tue, 27 Jan 2009 10:04:37 -0700
  • Re: Facing mistakes in structural design (a fantasy) Thu, 29 Jan 2009 10:22:43 -0700
  • Re: Facing mistakes in structural design Thu, 29 Jan 2009 21:27:45 -0700
  • Re: Facing mistakes in structural design  (a fantasy) Thu, 29 Jan 2009 21:39:02 -0700
  • Re: Valley Rafters Sat, 7 Feb 2009 20:52:46 -0700
  • Re: Saw Cut joints in concrete walls Wed, 11 Feb 2009 12:34:31 -0700
  • Re: Saw Cut joints in concrete walls Wed, 11 Feb 2009 12:35:46 -0700
  • Re: No Subject Sat, 14 Feb 2009 11:51:08 -0700
  • Ventilate stud spaces in earthquake retrofits? Sun, 15 Feb 2009 14:03:28 -0700
  • Re: Sole Plate to Raised Wood Diaphragm Shear Transfer (Sta.Monica) Mon, 16 Feb 2009 15:57:04 -0700
  • Re: Sole Plate >>>> (Sta.Monica) Tue, 17 Feb 2009 10:01:10 -0700
  • Re: Structural Steel Price - NEW IMPROVED PROCESS! ;) Tue, 24 Feb 2009 17:36:06 -0700
  • Re: Shear in NDS (and deflection) Thu, 26 Feb 2009 14:41:10 -0700
  • Re: Shear in NDS (and deflection) Thu, 26 Feb 2009 17:14:53 -0700
  • Re: Post-Installed Threaded Insert Wed, 11 Mar 2009 12:47:09 -0600
  • Re: Point supported glass design Thu, 12 Mar 2009 11:50:17 -0600
  • Re: Frozen soil = disturbed earth? Fri, 20 Mar 2009 15:23:36 -0600
  • Re: Frozen soil = disturbed earth? Fri, 20 Mar 2009 16:10:58 -0600
  • Re: Frozen soil = disturbed earth? Mon, 23 Mar 2009 14:45:47 -0600
  • Re: Frozen soil = disturbed earth? Tue, 24 Mar 2009 08:31:59 -0600
  • Re: Steel Joist Seat Height Thu, 26 Mar 2009 13:29:10 -0600
  • Re: CHINESE STEEL Tue, 31 Mar 2009 15:22:05 -0600

• Rich Lewis
  • RE: White Male Professionals Fri, 23 Jan 2009 19:06:59 -0700
  • RE: Visual Analysis for diaphragms Fri, 23 Jan 2009 19:07:35 -0700
  • RE: Fire Wall Connection Fri, 23 Jan 2009 19:08:30 -0700
  • RE: Facing mistakes in structural design Thu, 29 Jan 2009 20:30:24 -0700
  • RE: Concrete Bench With Wall Fri, 27 Feb 2009 05:51:41 -0700
  • RE: FACI Title? Fri, 27 Feb 2009 05:53:58 -0700
  • Thin Concrete Overlay Sun, 15 Mar 2009 13:48:19 -0600
  • RE: ACI Chapt. 22 Tue, 17 Mar 2009 16:37:56 -0600
  • RE: OT - Taxes Sat, 21 Mar 2009 09:01:51 -0600
  • RE: History of Seaint List Sat, 21 Mar 2009 09:09:14 -0600
  • RE: OT - Taxes Sat, 21 Mar 2009 09:12:38 -0600

• Richard Calvert
  • RE: Conversion of Excel to Word Wed, 11 Feb 2009 06:21:30 -0700
  • Re: Wind loads: ASD or Strength? Sat, 21 Feb 2009 08:53:19 -0700
  • FACI Title? Fri, 27 Feb 2009 05:31:11 -0700
  • RE: FACI Title? Fri, 27 Feb 2009 05:58:02 -0700
  • RE: FACI Title? Fri, 27 Feb 2009 06:09:58 -0700
  • RE: IT question Tue, 3 Mar 2009 08:30:10 -0700
  • RE: Haunch Moment Connetion Design Reference Thu, 5 Mar 2009 08:03:12 -0700
  • Brass Railing Tue, 10 Mar 2009 07:25:47 -0600
  • RE: Brass Railing Thu, 12 Mar 2009 05:38:40 -0600
  • ACI Chapt. 22 Tue, 17 Mar 2009 12:44:40 -0600

• Rick
  • RE: ACI 530 R=1.5 Thu, 5 Feb 2009 08:57:40 -0700
  • RE: ACI 530 R=1.5 Thu, 5 Feb 2009 08:58:49 -0700
  • RE: ACI 530 R=1.5 Thu, 5 Feb 2009 09:44:07 -0700
  • Re: ACI 530 R=1.5 Thu, 5 Feb 2009 10:06:13 -0700
  • Re: Concrete Bench With Wall Thu, 26 Feb 2009 11:06:14 -0700
  • Re: CHINESE STEEL Tue, 31 Mar 2009 09:02:01 -0600

• robert . freeman
  • Thin concrete overlay Sun, 15 Mar 2009 17:56:10 -0600

• Robert Jonkman
  • RE: Quick. Ideas pls. Tue, 17 Feb 2009 08:29:29 -0700
  • RE: Quick. Ideas pls. Tue, 17 Feb 2009 08:54:51 -0700
  • RE: Quick. Ideas pls. Tue, 17 Feb 2009 09:38:03 -0700

• Roger Davis
  • Re: Fire Wall Connection Sun, 8 Feb 2009 11:01:41 -0700
  • Re: Swimming Pools Sun, 8 Feb 2009 11:20:45 -0700

• sam saumil
  • progressive collapse Thu, 19 Feb 2009 22:11:37 -0700

• Scott E Maxwell
  • Re: SIPS in Seismic Design Category D, E ,F Fri, 23 Jan 2009 18:06:42 -0700
  • Re: will there be a change in ASCE 7-05 once the ICC 2009 code is approved? Mon, 16 Feb 2009 12:27:14 -0700
  • Re: Shear in NDS Thu, 26 Feb 2009 18:43:48 -0700
  • Re: Florida License Renewal Thu, 26 Feb 2009 18:46:24 -0700
  • Re: ICF Shear Wall in SDC C Thu, 26 Feb 2009 18:54:14 -0700
  • Re: Florida License Renewal Fri, 27 Feb 2009 07:07:48 -0700
  • Re: Florida License Renewal Sat, 28 Feb 2009 01:52:44 -0700

• Scott Maxwell
  • RE: Wind design on hillside and slopes - tools Tue, 6 Jan 2009 20:02:11 -0700
  • RE: SIPS in Seismic Design Category D, E ,F Mon, 26 Jan 2009 11:07:59 -0700
  • RE: Codes comparison Thu, 5 Feb 2009 00:41:38 -0700
  • RE: ACI 530 R=1.5 Fri, 6 Feb 2009 12:01:20 -0700
  • Re: Scott & Joe in Recovery after Kidney Transplant Wed, 11 Feb 2009 17:12:33 -0700
  • Re: DOS to Windows Printing Problem Fri, 13 Feb 2009 19:15:59 -0700
  • Re: Wind loads: ASD or Strength? Tue, 17 Feb 2009 13:55:35 -0700
  • Re: Remove from list Sat, 21 Feb 2009 17:55:39 -0700
  • Re: IT question Mon, 2 Mar 2009 23:14:39 -0700
  • Re: IT question Tue, 3 Mar 2009 13:04:00 -0700
  • RE: ACI Chapt. 22 Sat, 21 Mar 2009 00:29:33 -0600
  • RE: Minimum Reinforcing in CMU Fri, 27 Mar 2009 18:07:15 -0600

• Scott, William N
  • RE: Shear Flow AISC 13th Ed Mon, 26 Jan 2009 11:50:40 -0700
  • RE: Facing mistakes in structural design Thu, 29 Jan 2009 10:21:14 -0700

• seaint04
  • Fire Wall Connection Fri, 23 Jan 2009 09:53:09 -0700
  • Concrete Bench With Wall Thu, 26 Feb 2009 09:57:16 -0700

• SGE Structural
  • Mailing Design Documents Tue, 6 Jan 2009 19:49:41 -0700
  • Re: Strong-tie Tue, 27 Jan 2009 11:11:26 -0700
  • Re: IBC Section 1908.1.16 is a bugger Tue, 3 Feb 2009 15:11:38 -0700
  • Re: "Single Angle" Combined Torsion & Bi-Axial Bending (repost) Tue, 3 Feb 2009 16:41:47 -0700
  • Re: will there be a change in ASCE 7-05 once the ICC 2009 code is approved? Mon, 16 Feb 2009 12:47:47 -0700
  • Re: will there be a change in ASCE 7-05 once the ICC 2009 code is approved? Mon, 16 Feb 2009 13:21:32 -0700
  • some code issues Thu, 26 Feb 2009 17:07:44 -0700

• Sharad T. Patel
  • C &C wind load on parapets - really around 45 psf? Mon, 12 Jan 2009 19:43:05 -0700
  • RE: C &C wind load on parapets - really around 45 psf? Tue, 13 Jan 2009 10:47:35 -0700

• Souther, Joseph
  • Subgrade Modulus for Mat Foundations Thu, 29 Jan 2009 10:59:44 -0700
  • RE: Subgrade Modulus for Mat Foundations Thu, 29 Jan 2009 12:04:24 -0700
  • Remove from list Fri, 20 Feb 2009 17:15:02 -0700

• sscholl2(--nospam--at)juno.com
  • RE: Paying for clarification Tue, 6 Jan 2009 21:25:28 -0700
  • Re: Is it just me? Mon, 12 Jan 2009 13:41:10 -0700
  • What to do in a downturn Mon, 9 Feb 2009 19:57:09 -0700
  • Re: Sole Plate to Raised Wood Diaphragm Shear Transfer Mon, 16 Feb 2009 15:36:57 -0700
  • Re: Sole Plate to Raised Wood Diaphragm Shear Transfer (Sta.Monica) Mon, 16 Feb 2009 21:28:45 -0700
  • RE: Green Point Rated Concrete Thu, 12 Mar 2009 22:58:17 -0600

• Stan Caldwell
  • Scott Maxwell Wed, 4 Feb 2009 17:09:02 -0700
  • Opportunities in Texas for Structural Engineers Fri, 6 Feb 2009 10:37:40 -0700
  • Re: History of Seaint List Tue, 24 Mar 2009 15:00:04 -0600
  • Re: Frozen soil = disturbed earth? Tue, 24 Mar 2009 16:00:24 -0600
  • Re: History of Seaint List Tue, 24 Mar 2009 16:03:12 -0600
  • Re: History of Seaint List Tue, 24 Mar 2009 16:04:25 -0600
  • Re: History of Seaint List Tue, 24 Mar 2009 19:07:23 -0600

• Stan R. Caldwell
  • RE: Opportunities in Texas for Structural Engineers Fri, 6 Feb 2009 21:11:44 -0700
  • RE: Opportunities in Texas for Structural Engineers Fri, 6 Feb 2009 21:12:46 -0700

• StructuralReview
  • Re: will there be a change in ASCE 7-05 once the ICC 2009 code is approved? Mon, 16 Feb 2009 11:48:42 -0700
  • Re: will there be a change in ASCE 7-05 once the ICC 2009 code is approved? Mon, 16 Feb 2009 13:07:16 -0700

• Stuart, Matthew
  • IBC 2006 Mon, 19 Jan 2009 10:16:26 -0700
  • RE: IBC 2006 Mon, 19 Jan 2009 11:19:44 -0700
  • RE: Fire Wall Connection Fri, 23 Jan 2009 10:39:10 -0700
  • RE: Fire Wall Connection Fri, 23 Jan 2009 19:19:13 -0700
  • RE: Facing mistakes in structural design Thu, 29 Jan 2009 10:12:30 -0700
  • RE: Saw Cut joints in concrete walls Wed, 11 Feb 2009 11:39:09 -0700
  • RE: History of Seaint List Tue, 24 Mar 2009 15:36:38 -0600
  • RE: history of the list Wed, 25 Mar 2009 08:58:50 -0600

• Sushil Chauhan
  • Haunch Moment Connetion Design Reference Thu, 5 Mar 2009 06:51:35 -0700

• Szuchuan Chang
  • Friction Clip Connections, are they still accepted by ASCE 7? Unistut Sun, 25 Jan 2009 12:09:06 -0700
  • Re: Friction Clip Connections, are they still accepted by ASCE 7? Unistut Sun, 25 Jan 2009 16:57:40 -0700
  • Re: Friction Clip Connections, are they still accepted by ASCE 7? Unistut Mon, 26 Jan 2009 10:46:48 -0700

• T. Boene
  • Re: Lateral Stability of a Box Beam ? Thu, 22 Jan 2009 01:20:26 -0700

• Tarek Mokhtar
  • Re: Concrete Bench With Wall Thu, 26 Feb 2009 10:16:20 -0700

• Tejas Ins
  • DE-COUPLE CONCRETE SHEAR WALLS AT CORES Wed, 25 Feb 2009 00:28:04 -0700
  • DE-COUPLE CONCRETE SHEAR WALLS AT CORES Sun, 1 Mar 2009 10:07:04 -0700

• Thor Matteson
  • RE: Paying for clarification Wed, 7 Jan 2009 02:03:43 -0700
  • Re: Is it just me? Sun, 11 Jan 2009 09:09:35 -0700
  • Australian Bldg. Code Mon, 12 Jan 2009 22:13:57 -0700
  • RE:Shear Flow AISC 13th Ed. Thu, 29 Jan 2009 00:32:46 -0700
  • RE: Ventilate stud spaces in earthquake retrofits? Mon, 16 Feb 2009 12:54:45 -0700
  • RE: Sole Plate to Raised Wood Diaphragm Shear Transfer (Sta.Monica) Tue, 17 Feb 2009 02:01:33 -0700

• Thor Tandy
  • Catenary Wed, 14 Jan 2009 08:22:33 -0700
  • RE: Catenary Thu, 15 Jan 2009 11:08:16 -0700
  • RE: timber pile brace connection Tue, 20 Jan 2009 16:04:53 -0700
  • Bond Strength of Portland Grouts Wed, 21 Jan 2009 15:48:40 -0700
  • RE: Bond Strength of Portland Grouts Wed, 21 Jan 2009 17:14:21 -0700
  • Swimming Pools Thu, 29 Jan 2009 09:39:53 -0700
  • RE: thor's pool Sat, 31 Jan 2009 11:02:19 -0700
  • RE: thor's pool Sat, 31 Jan 2009 11:07:37 -0700
  • RE: Licensed Fire Technicians Mon, 2 Feb 2009 21:34:38 -0700
  • Plotting pdf Sat, 7 Feb 2009 15:51:48 -0700
  • RE: Plotting pdf Sun, 8 Feb 2009 14:02:17 -0700
  • RE: Plotting pdf Sat, 14 Feb 2009 15:20:47 -0700
  • RE: Plotting pdf Sun, 15 Feb 2009 12:25:51 -0700
  • Quick. Ideas pls. Tue, 17 Feb 2009 08:19:30 -0700
  • RE: Quick. Ideas pls. Tue, 17 Feb 2009 08:43:08 -0700
  • RE: Quick. Ideas pls. Tue, 17 Feb 2009 09:15:33 -0700
  • RE: Quick. Ideas pls. Tue, 17 Feb 2009 09:36:45 -0700
  • IT question Mon, 2 Mar 2009 15:15:08 -0700
  • RE: IT question Mon, 2 Mar 2009 15:41:40 -0700
  • RE: IT question Mon, 2 Mar 2009 15:54:59 -0700
  • RE: IT question Mon, 2 Mar 2009 16:49:58 -0700
  • RE: IT question Mon, 2 Mar 2009 17:36:44 -0700
  • RE: IT question Tue, 3 Mar 2009 12:34:17 -0700
  • RE: IT question Tue, 3 Mar 2009 12:47:02 -0700
  • RE: Point supported glass design Wed, 11 Mar 2009 17:01:27 -0600
  • RE: Point supported glass design Thu, 12 Mar 2009 10:07:37 -0600
  • RE: Point supported glass design Thu, 12 Mar 2009 22:44:30 -0600
  • RE: IT question Mon, 30 Mar 2009 12:59:11 -0600

• Timothy Hilton
  • Shear in NDS Thu, 26 Feb 2009 13:43:17 -0700

• Tom . Hunt
  • Rho and Omega Mon, 12 Jan 2009 17:18:47 -0700
  • Re: Underground Water Tank in Gulf Mon, 19 Jan 2009 08:03:50 -0700
  • Re: Bond Strength of Portland Grouts Wed, 21 Jan 2009 16:38:45 -0700
  • Re: Subgrade Modulus for Mat Foundations Thu, 29 Jan 2009 11:28:51 -0700
  • RE: Subgrade Modulus for Mat Foundations Thu, 29 Jan 2009 11:59:42 -0700
  • RE: Subgrade Modulus for Mat Foundations Thu, 29 Jan 2009 12:54:35 -0700
  • Re: Archive (WAS: Swimming Pools) Thu, 29 Jan 2009 16:10:00 -0700
  • RE: Archive (WAS: Swimming Pools) Thu, 29 Jan 2009 16:52:42 -0700
  • Re: Anchor bolt sleeve - pretensioning Mon, 2 Feb 2009 15:26:19 -0700
  • Re: Anchor bolt sleeve - pretensioning Tue, 3 Feb 2009 07:53:15 -0700
  • Re: Load test on piles Tue, 3 Feb 2009 17:44:50 -0700
  • Fw: Load test on piles Thu, 5 Feb 2009 08:22:21 -0700
  • Re: Dynamic Analysis Thu, 5 Feb 2009 09:48:16 -0700
  • Conversion of Excel to Word Wed, 11 Feb 2009 07:51:39 -0700
  • RE: Conversion of Excel to Word Wed, 11 Feb 2009 07:52:32 -0700
  • RE: Conversion of Excel to Word Mon, 16 Feb 2009 08:45:20 -0700
  • Re: Steel connection design Wed, 18 Feb 2009 07:58:30 -0700
  • Re: Steel connection design Thu, 19 Feb 2009 07:43:34 -0700
  • Re: Active Seismic Masses Thu, 19 Feb 2009 10:41:35 -0700
  • Re: Low alkali cement Thu, 19 Feb 2009 16:36:05 -0700
  • Re: ASCE 7-05: RSA Procedure per 12.9 Fri, 20 Feb 2009 11:11:27 -0700
  • Re: Wind loads: ASD or Strength? Mon, 23 Feb 2009 08:02:58 -0700
  • Re: Structural Steel Price Tue, 24 Feb 2009 15:34:58 -0700
  • Re: ASCE-7 Ice Loads Wed, 25 Feb 2009 10:08:49 -0700
  • Re: ASCE-7 Ice Loads - Load Combinations Wed, 25 Feb 2009 11:20:10 -0700
  • Re: Concrete Bench With Wall Thu, 26 Feb 2009 10:21:27 -0700
  • Fw: ASCE-7 Ice Loads - Retraction Thu, 26 Feb 2009 11:07:38 -0700
  • FACI Title? Mon, 2 Mar 2009 08:08:06 -0700
  • RE: FACI Title? Mon, 2 Mar 2009 08:08:58 -0700
  • RE: FACI Title? Mon, 2 Mar 2009 08:09:49 -0700
  • Re: Welding Through Metal Roof Deck Mon, 2 Mar 2009 14:47:35 -0700
  • RE: IT question Tue, 3 Mar 2009 08:38:53 -0700
  • RE: Haunch Moment Connetion Design Reference Thu, 5 Mar 2009 08:20:45 -0700
  • Brass Railing Tue, 10 Mar 2009 07:43:21 -0600
  • RE: Brass Railing Thu, 12 Mar 2009 08:15:55 -0600
  • Re: Question on Staad Pro 2006 Thu, 12 Mar 2009 16:19:35 -0600
  • Re: Green Point Rated Concrete Thu, 12 Mar 2009 17:04:24 -0600
  • Re: Thin Concrete Overlay Mon, 16 Mar 2009 08:10:15 -0600
  • ACI Chapt. 22 Tue, 17 Mar 2009 13:11:08 -0600
  • Re: Frozen soil = disturbed earth? Fri, 20 Mar 2009 16:04:47 -0600

• Tom Monti
  • Green Point Rated Concrete Thu, 12 Mar 2009 16:45:55 -0600

• Tom Skaggs
  • RE: Multi-Lat 2008 Mon, 5 Jan 2009 12:39:10 -0700
  • RE: Does George Housner deserve better? Tue, 3 Feb 2009 11:19:46 -0700
  • RE: Adjustment Factors Cd for timber column Thu, 5 Feb 2009 10:24:35 -0700

• Valentin Shustov
  • Does George Housner deserve better? Mon, 2 Feb 2009 10:38:29 -0700
  • RE: Does George Housner deserve better? Tue, 3 Feb 2009 11:00:22 -0700
  • RE: Does George Housner deserve better? Wed, 4 Feb 2009 09:49:51 -0700
  • RE: Does George Housner deserve better? Thu, 5 Feb 2009 13:03:52 -0700

• vicpeng
  • Re: IT question Mon, 16 Mar 2009 16:40:47 -0600

• vicpeng(--nospam--at)telus.net
  • RE: Swimming Pools Thu, 29 Jan 2009 10:52:53 -0700
  • RE: Swimming Pools Thu, 29 Jan 2009 11:37:26 -0700
  • RE: Subgrade Modulus for Mat Foundations Thu, 29 Jan 2009 11:42:25 -0700
  • RE: Subgrade Modulus for Mat Foundations Thu, 29 Jan 2009 12:37:43 -0700
  • RE: Subgrade Modulus for Mat Foundations Thu, 29 Jan 2009 13:02:35 -0700
  • RE: Licensed Fire Technicians Mon, 2 Feb 2009 15:51:20 -0700
  • RE: Point supported glass design Fri, 13 Mar 2009 06:02:21 -0600

• Wesley Werner
  • Unbraced truss compression flange Mon, 12 Jan 2009 14:48:26 -0700
  • RE: Concrete Spring Constant for Base Plate Modeling Fri, 30 Jan 2009 12:56:41 -0700
  • RE: Concrete Spring Constant for Base Plate Modeling (correction) Fri, 30 Jan 2009 13:10:20 -0700
  • RE: Concrete Spring Constant for Base Plate Modeling Mon, 2 Feb 2009 08:01:06 -0700
  • RE: Adjustment Factors Cd for timber column Thu, 5 Feb 2009 16:48:08 -0700

• William Haynes
  • Re: Concrete Spring Constant for Base Plate Modeling Fri, 30 Jan 2009 12:27:14 -0700

• William.Sherman
  • RE: Visual Analysis for diaphragms Tue, 27 Jan 2009 16:38:42 -0700
  • RE: IBC Section 1908.1.16 is a bugger Thu, 5 Feb 2009 08:12:31 -0700
  • RE: ASCE 7-05: RSA Procedure per 12.9 Fri, 20 Feb 2009 09:29:12 -0700
  • RE: Green Point Rated Concrete Thu, 12 Mar 2009 17:27:03 -0600

• WISH DENNIS
  • Standard concrete footing and soil recompaction question Fri, 2 Jan 2009 21:50:50 -0700

• xmy987
  • Min Concrete Shear Wall Ratio Tue, 17 Feb 2009 11:23:26 -0700
  • Tilt Up Building Seismic force Resisting System Fri, 20 Feb 2009 16:53:19 -0700
  • RE: Tilt Up Building Seismic force Resisting System Fri, 20 Feb 2009 17:03:35 -0700

• Yi Yang
  • RE: IT question Mon, 2 Mar 2009 17:30:12 -0700

---

Mail converted by MHonArc